wpa_supplicant and wi

[Isaac Waldron]

I should add that I'm running RELENG_6 updated and compiled on 4/19/2006.

On 4/19/06, Isaac Waldron <isaac.waldron at gmail.com> wrote:
> I am using a Netgear MA401 with the wi driver, and am having trouble
> using wpa_supplicant to set static WEP keys.  I have the wlan_wep.ko
> module loaded with wlan and wi built into the kernel.  My
> wpa_supplicant.conf looks like this:
>
> ctrl_interface=/var/run/wpa_supplicant
> ctrl_interface_group=wheel
>
> network={
>         ssid="INTERNERD"
>         scan_ssid=1
>         priority=1
>         key_mgmt=NONE
>         wep_key0=75745E266D4247372840217E73
>         wep_tx_keyidx=0
> }
>
> and wpa_supplicant -i wi0 -c /etc/wpa_supplicant.conf -d -d returns
> the following:
>
> Initializing interface 'wi0' conf '/etc/wpa_supplicant.conf' driver
> 'default' ctrl_interface 'N/A'
> Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
> Reading configuration file '/etc/wpa_supplicant.conf'
> ctrl_interface='/var/run/wpa_supplicant'
> ctrl_interface_group=0 (from group name 'wheel')
> Line: 4 - start of a new network block
> ssid - hexdump_ascii(len=9):
>      49 4e 54 45 52 4e 45 52 44                        INTERNERD
> scan_ssid=1 (0x1)
> priority=1 (0x1)
> key_mgmt: 0x4
> wep_key0 - hexdump(len=13): 75 74 5e 26 6d 42 47 37 28 40 21 7e 73
> wep_tx_keyidx=0 (0x0)
> Priority group 1
>    id=0 ssid='INTERNERD'
> Initializing interface (2) 'wi0'
> EAPOL: SUPP_PAE entering state DISCONNECTED
> EAPOL: KEY_RX entering state NO_KEY_RECEIVE
> EAPOL: SUPP_BE entering state INITIALIZE
> EAP: EAP entering state DISABLED
> EAPOL: External notification - portEnabled=0
> EAPOL: External notification - portValid=0
> Own MAC address: 00:09:5b:29:81:67
> wpa_driver_bsd_set_wpa: enabled=1
> wpa_driver_bsd_set_wpa_internal: wpa=3 privacy=1
> wpa_driver_bsd_del_key: keyidx=0
> wpa_driver_bsd_del_key: keyidx=1
> wpa_driver_bsd_del_key: keyidx=2
> wpa_driver_bsd_del_key: keyidx=3
> wpa_driver_bsd_set_countermeasures: enabled=0
> wpa_driver_bsd_set_drop_unencrypted: enabled=1
> Setting scan request: 0 sec 100000 usec
> Added interface wi0
> State: DISCONNECTED -> SCANNING
> Starting AP scan (specific SSID)
> Scan SSID - hexdump_ascii(len=9):
>      49 4e 54 45 52 4e 45 52 44                        INTERNERD
> State: SCANNING -> ASSOCIATED
> Associated to a new BSS: BSSID=00:14:bf:00:2e:d4
> No keys have been configured - skip key clearing
> Network configuration found for the current AP
> WPA: clearing AP WPA IE
> WPA: clearing AP RSN IE
> WPA: clearing own WPA/RSN IE
> EAPOL: External notification - portControl=ForceAuthorized
> Associated with 00:14:bf:00:2e:d4
> WPA: Association event - clear replay counter
> EAPOL: External notification - portEnabled=0
> EAPOL: External notification - portValid=0
> EAPOL: External notification - portEnabled=1
> EAPOL: SUPP_PAE entering state S_FORCE_AUTH
> EAPOL: SUPP_BE entering state IDLE
> Cancelling authentication timeout
> State: ASSOCIATED -> COMPLETED
>
> No keys are set on the wi0 interface apparently, as ifconfig reports
> deftxkey UNDEF and no  configured keys.  In other outputs from
> wpa_supplicant that I've seen, there are lines beginning with
> wpa_driver_bsd_key_set that appear to be key setting.
>
> Does anyone have this working with a MA401 that could help me out?
>
> Thanks,
> Isaac Waldron
> --
> Isaac Waldron
> isaac.waldron at gmail.com
> mobile: 1-508-353-3453
> aim: n1yzi
>


--
Isaac Waldron
isaac.waldron at gmail.com
mobile: 1-508-353-3453
aim: n1yzi