device em0 not showing up at boot

[Jack Vogel]

On 11/29/05, Forrest Aldrich <forrie at forrie.com> wrote:
>
>
>
> Hi Jack, Mike,
>
> Thank you for your responses.  Sorry it took me a day to get to this.
>
> Here is the output per the above command.
>
> Thanks again,
> Forrest
>
>  ...




em0 at pci0:13:0:  class=0x020000 card=0x11768086 chip=0x10768086 rev=0x00
> hdr=0x00
>     vendor   = 'Intel Corporation'
>     device   = '82547EI Gigabit Ethernet Controller'
>     class    = network
>     subclass = ethernet
>

So, the kernel does see the device Forrest. If you are not seeing any sort
of
message on boot then it is probably because you dont have the driver
configured
into your kernel maybe??

Jack