wireless, ndis problems on Compaq TC1000 Tablet running 6-STABLE
John Nielsen
lists at jnielsen.net
Tue Nov 29 20:40:04 GMT 2005
After successfully installing FreeBSD 6.0 on a Compaq TC1000 Tablet PC (and
updating it to yesterday's -STABLE), I am trying to get the built-in wireless
to work. The wi(4) driver does not attach to it. Under Windows, the card
shows up as a "Compaq 802.11b WLAN Mini-PCI" card (although it is not in the
user-accessible Mini-PCI slot). Pciconf gives this:
none4 at pci0:10:0: class=0x020000 card=0x00d30e11 chip=0x05061114
rev=0x11 hdr=0x00
vendor = 'Atmel Corp.'
device = 'AT76C506 802.11b Wireless Network Adaptor'
class = network
subclass = ethernet
(Full pciconf -lv output attached).
My first question: is there a chance it would be trivial to make this card
work with the wi(4) driver? ISTR reading this morning that this was a Prism
chip, although now I can't find that again.
Undaunted, I moved on to ndis(4). Using wine(1), I was able to extract a
driver from SP23100.exe, obtained from hp's website.[1] I fed netcwl200.inf
and cwl200.sys to ndisgen(8), and was rewarded with a successfully compiled
cwl200_sys.ko.
Unfortunately, the machine panics as soon as the module is loaded, with the
following output (transcribed by hand, typos possible):
tablet# kldload cwl200_sys
isab1: <PCI-ISA bridge> at device 7.4 on pci0
device_attach: isab1 attach returned 6
no match for swprintf
isab1: <PCI-ISA bridge> at device 7.4 on pci0
device_attach: isab1 attach returned 6
ndis0: <Compaq 802.11b WLAN Mini-PCI> port 0x1c00-0x1cff mem
0xe8030000-0xe803ffff at device 10.0 on pci0
ndis0: NDIS API version: 5.1
ntoskrnl dummy called...
ntoskrnl dummy called...
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0x0
fault code = supervisor write, page not present
instruction pointer = 0x20:0xc3bf70d8
stack pointer = 0x28:0xd6cbc62c
frame pointer = 0x28:0xd6cbc844
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 571 (kldload)
trap number = 12
panic: page fault
Which leads to my second question: should ndis be expected to work with this
device? Assuming the answer is yes, what else can I do to track down the
problem? A complete (verbose) dmesg from the system is attached.
Any input will be much appreciated. Thanks!
JN
[1] See
http://h18007.www1.hp.com/support/files/Compaqtabletpc/us/download/19836.html
-------------- next part --------------
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-STABLE #0: Mon Nov 28 15:23:03 EST 2005
root at sparrtab.benefitfocus.com:/usr/obj/usr/src/sys/SPARRTAB
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0851000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0851188.
Calibrating clock(s) ... i8254 clock: 1193167 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 995502588 Hz
CPU: Transmeta(tm) Crusoe(tm) Processor TM5800 (995.50-MHz 586-class CPU)
Origin = "GenuineTMx86" Id = 0x543 Stepping = 3
Features=0x80893f<FPU,VME,DE,PSE,TSC,MSR,CX8,SEP,CMOV,MMX>
Processor revision 1.5.0.2
Code Morphing Software revision 4.4.0-10-156
20030501 16:35 official release 62.0.1-4.4.0#1
real memory = 511639552 (487 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009afff, 630784 bytes (154 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c25000 - 0x000000001df23fff, 489680896 bytes (119551 pages)
avail memory = 491061248 (468 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f7710
bios32: Entry = 0xfd6a0 (c00fd6a0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd6a0+0x16c
pnpbios: Found PnP BIOS data at 0xc00f7760
pnpbios: Entry = f0000:a13e Rev = 1.0
Other BIOS signatures found:
Crusoe LongRun support enabled, current mode: 2 <1000MHz 1350mV 100%>
wlan: <802.11 Link Layer>
netsmb_dev: loaded
nfslock: pseudo-device
null: <null device, zero device>
io: <I/O>
random: <entropy source, Software, Yarrow>
mem: <memory>
VESA: information block
56 45 53 41 00 03 00 01 00 01 01 00 00 00 22 00
00 01 00 01 11 03 07 01 00 01 1a 01 00 01 25 01
00 01 00 01 01 01 02 01 03 01 04 01 05 01 06 01
07 01 08 01 09 01 0a 01 0b 01 0c 01 0e 01 0f 01
VESA: 33 mode(s) found
VESA: v3.0, 16384k memory, flags:0x1, mode table:0xc0761f62 (1000022)
VESA: NVidia
VESA: NVidia Corporation NV11 Board Chip Rev B2
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD RSDT> on motherboard
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80003904
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=03951279)
pcibios: BIOS version 2.10
Found $PIR table, 8 entries at 0xc00fdf40
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 7 A 0x01 3 4 6 9 10 11 12 14 15
embedded 0 7 B 0x02 3 4 6 9 10 11 12 14 15
embedded 0 7 C 0x03 3 4 6 9 10 11 12 14 15
embedded 0 7 D 0x04 3 4 6 9 10 11 12 14 15
embedded 0 12 A 0x01 3 4 6 9 10 11 12 14 15
embedded 0 12 B 0x02 3 4 6 9 10 11 12 14 15
embedded 0 12 C 0x03 3 4 6 9 10 11 12 14 15
embedded 0 5 A 0x02 3 4 6 9 10 11 12 14 15
embedded 0 8 A 0x01 3 4 6 9 10 11 12 14 15
embedded 0 11 A 0x01 3 4 6 9 10 11 12 14 15
embedded 0 11 B 0x02 3 4 6 9 10 11 12 14 15
embedded 0 10 A 0x04 3 4 6 9 10 11 12 14 15
embedded 0 9 A 0x01 3 4 6 9 10 11 12 14 15
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 11 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 11 func 1
acpi0: Power Button (fixed)
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 0 func 0
pci_link0: <ACPI PCI Link LNKA> irq 9 on acpi0
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 9 N 0 9
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 9 N 0 9
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 9
pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 11
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 11
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 11
pci_link2: <ACPI PCI Link LNKC> irq 10 on acpi0
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 7
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 7
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 7
pci_link3: <ACPI PCI Link LNKD> on acpi0
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 15
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 15
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 15
acpi_ec0: <Embedded Controller: GPE 0x1> port 0x62,0x66 on acpi0
acpi_ec0: info: new max delay is 10 us
acpi_ec0: info: new max delay is 40 us
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 0 func 0
acpi_ec0: info: new max delay is 80 us
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 7 func 4
ACPI timer: 0/811 0/3 1/2 1/2 0/11 0/3 0/4 1/2 1/2 1/2 -> 5
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x1279, dev=0x0395, revid=0x03
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x2200, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base e8100000, size 20, enabled
found-> vendor=0x1279, dev=0x0396, revid=0x00
bus=0, slot=0, func=1
class=05-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1279, dev=0x0397, revid=0x00
bus=0, slot=0, func=2
class=05-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x0112, revid=0xb2
bus=0, slot=5, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base e9000000, size 24, enabled
map[14]: type 3, range 32, base f0000000, size 27, enabled
pcib0: matched entry for 0.5.INTA (src \\_SB_.PCI0.PIB_.LNKB:0)
pcib0: slot 5 INTA routed to irq 11 via \\_SB_.PCI0.PIB_.LNKB
found-> vendor=0x1106, dev=0x0686, revid=0x40
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0x0571, revid=0x06
bus=0, slot=7, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 00001040, size 4, enabled
found-> vendor=0x1106, dev=0x3057, revid=0x40
bus=0, slot=7, func=4
class=06-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0x3058, revid=0x50
bus=0, slot=7, func=5
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=255
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 00001400, size 8, port disabled
map[14]: type 4, range 32, base 00001054, size 2, enabled
map[18]: type 4, range 32, base 00001050, size 2, enabled
found-> vendor=0x1106, dev=0x3068, revid=0x30
bus=0, slot=7, func=6
class=07-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=255
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 00001800, size 8, port disabled
found-> vendor=0x8086, dev=0x1059, revid=0x10
bus=0, slot=8, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0013, statreg=0x8290, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=9
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base e8020000, size 12, enabled
map[14]: type 4, range 32, base 00001000, size 6, enabled
map[18]: type 1, range 32, base e8000000, size 17, enabled
pcib0: matched entry for 0.8.INTA (src \\_SB_.PCI0.PIB_.LNKA:0)
pcib0: slot 8 INTA routed to irq 9 via \\_SB_.PCI0.PIB_.LNKA
found-> vendor=0x1114, dev=0x0506, revid=0x11
bus=0, slot=10, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0010, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x63 (2970 ns), mingnt=0x0c (3000 ns), maxlat=0x3c (15000 ns)
intpin=a, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base e8030000, size 16, memory disabled
map[14]: type 4, range 32, base 00001c00, size 8, port disabled
found-> vendor=0x104c, dev=0xac55, revid=0x01
bus=0, slot=11, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns)
intpin=a, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 00000000, size 12, enabled
found-> vendor=0x104c, dev=0xac55, revid=0x01
bus=0, slot=11, func=1
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x8210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns)
intpin=b, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 00000000, size 12, enabled
found-> vendor=0x1033, dev=0x0035, revid=0x41
bus=0, slot=12, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0016, statreg=0x8210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x01 (250 ns), maxlat=0x2a (10500 ns)
intpin=a, irq=9
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base e8022000, size 12, enabled
pcib0: matched entry for 0.12.INTA (src \\_SB_.PCI0.PIB_.LNKA:0)
pcib0: slot 12 INTA routed to irq 9 via \\_SB_.PCI0.PIB_.LNKA
found-> vendor=0x1033, dev=0x0035, revid=0x41
bus=0, slot=12, func=1
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0016, statreg=0x8210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x01 (250 ns), maxlat=0x2a (10500 ns)
intpin=b, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base e8023000, size 12, enabled
pcib0: matched entry for 0.12.INTB (src \\_SB_.PCI0.PIB_.LNKB:0)
pcib0: slot 12 INTB routed to irq 11 via \\_SB_.PCI0.PIB_.LNKB
found-> vendor=0x1033, dev=0x00e0, revid=0x02
bus=0, slot=12, func=2
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0016, statreg=0x8210, cachelnsz=8 (dwords)
lattimer=0x84 (3960 ns), mingnt=0x10 (4000 ns), maxlat=0x22 (8500 ns)
intpin=c, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base e8021000, size 8, enabled
pcib0: matched entry for 0.12.INTC (src \\_SB_.PCI0.PIB_.LNKC:0)
pcib0: slot 12 INTC routed to irq 10 via \\_SB_.PCI0.PIB_.LNKC
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <display, VGA> at device 5.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686B UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1040-0x104f at device 7.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1040
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ata1: [MPSAFE]
isab1: <PCI-ISA bridge> at device 7.4 on pci0
isa: isa0 already exists; skipping it
device_attach: isab1 attach returned 6
pcm0: <VIA VT82C686A> port 0x1400-0x14ff,0x1054-0x1057,0x1050-0x1053 at device 7.5 on pci0
pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x1400
pcib0: matched entry for 0.7.INTC (src \\_SB_.PCI0.PIB_.LNKC:0)
pcib0: slot 7 INTC routed to irq 10 via \\_SB_.PCI0.PIB_.LNKC
pcm0: [GIANT-LOCKED]
pcm0: <Analog Devices AD1981A AC97 Codec (id = 0x41445372)>
pcm0: Codec features headphone, 20 bit DAC, 5 bit master volume, no 3D Stereo Enhancement
pcm0: Primary codec extended features variable rate PCM, AMAP, reserved 4
pcm0: sndbuf_setmap 1c5000, 1000; 0xc31f1000 -> 1c5000
pcm0: sndbuf_setmap 1e7000, 1000; 0xc31f3000 -> 1e7000
pci0: <simple comms> at device 7.6 (no driver attached)
fxp0: <Intel 82551QM Pro/100 M Mobile Connection> port 0x1000-0x103f mem 0xe8020000-0xe8020fff,0xe8000000-0xe801ffff irq 9 at device 8.0 on pci0
fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe8020000
fxp0: using memory space register mapping
fxp0: PCI IDs: 8086 1059 0e11 00b5 0010
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
fxp0: Ethernet address: 00:08:02:92:84:f8
fxp0: [MPSAFE]
pci0: <network, ethernet> at device 10.0 (no driver attached)
cbb0: <TI1520 PCI-CardBus Bridge> at device 11.0 on pci0
cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80000000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib0: matched entry for 0.11.INTA (src \\_SB_.PCI0.PIB_.LNKA:0)
pcib0: slot 11 INTA routed to irq 9 via \\_SB_.PCI0.PIB_.LNKA
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
0x00: 0xac55104c 0x02100007 0x06070001 0x00822000
0x10: 0x80000000 0x020000a0 0x20030200 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x07400109
0x40: 0x00b50e11 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x08449061 0x00000000 0x00000000 0x01001022
0x90: 0x606422c0 0x00000000 0x00000000 0x00000000
0xa0: 0xfe120001 0x00c00000 0x00000001 0x0000001f
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
cbb1: <TI1520 PCI-CardBus Bridge> at device 11.1 on pci0
cbb1: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80001000
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pcib0: matched entry for 0.11.INTB (src \\_SB_.PCI0.PIB_.LNKB:0)
pcib0: slot 11 INTB routed to irq 11 via \\_SB_.PCI0.PIB_.LNKB
cbb1: [MPSAFE]
cbb1: PCI Configuration space:
0x00: 0xac55104c 0x82100007 0x06070001 0x00822000
0x10: 0x80001000 0x020000a0 0x20050400 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x0740020b
0x40: 0x00b50e11 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x08449061 0x00000000 0x00000000 0x01001022
0x90: 0x606422c0 0x00000000 0x00000000 0x00000000
0xa0: 0xfe120001 0x00c00000 0x00000001 0x0000001f
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
ohci0: <NEC uPD 9210 USB controller> mem 0xe8022000-0xe8022fff irq 9 at device 12.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe8022000
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <NEC uPD 9210 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <NEC uPD 9210 USB controller> mem 0xe8023000-0xe8023fff irq 11 at device 12.1 on pci0
ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe8023000
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: <NEC uPD 9210 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0: <NEC uPD 720100 USB 2.0 controller> mem 0xe8021000-0xe80210ff irq 10 at device 12.2 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xe8021000
ehci0: [GIANT-LOCKED]
usb2: EHCI version 0.95
usb2: companion controllers, 3 ports each: usb0 usb1
usb2: <NEC uPD 720100 USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: NEC EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 5 ports with 5 removable, self powered
acpi_tz0: <Thermal Zone> on acpi0
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcdfff,0xe7000-0xe7fff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
ppc0 failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, terminal emulator: sc (syscons terminal)
sio0 failed to probe at port 0x3f8 irq 4 on isa0
sio1 failed to probe at port 0x2f8 irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
ukbd0: Jing-Mold USB K/B+Mouse, rev 1.10/3.20, addr 2, iclass 3/1
kbd0 at ukbd0
kbd0: ukbd0, generic (0), config:0x0, flags:0x1d0000
ums0: Jing-Mold USB K/B+Mouse, rev 1.10/3.20, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 995502588 Hz quality 800
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding enabled, default to deny, logging disabled
DUMMYNET with IPv6 initialized (040826)
lo0: bpf attached
acpi_acad0: acline initialization start
battery0: battery initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ad0: setting PIO4 on VIA 82C686B chip
ad0: setting UDMA100 on VIA 82C686B chip
ad0: 28615MB <HITACHI DK23EA-30 00K4A0A2> at ata0-master UDMA100
ad0: 58605120 sectors [58140C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad0
battery0: battery initialization done, tried 1 times
Trying to mount root from ufs:/dev/ad0s2a
start_init: trying /sbin/init
-------------- next part --------------
hostb0 at pci0:0:0: class=0x060000 card=0x00b50e11 chip=0x03951279 rev=0x03 hdr=0x00
vendor = 'Transmeta Corp.'
device = 'LongRun Northbridge'
class = bridge
subclass = HOST-PCI
none0 at pci0:0:1: class=0x050000 card=0x00b50e11 chip=0x03961279 rev=0x00 hdr=0x00
vendor = 'Transmeta Corp.'
device = 'SDRAM Controller'
class = memory
subclass = RAM
none1 at pci0:0:2: class=0x050000 card=0x00b50e11 chip=0x03971279 rev=0x00 hdr=0x00
vendor = 'Transmeta Corp.'
device = 'BIOS scratchpad'
class = memory
subclass = RAM
none2 at pci0:5:0: class=0x030000 card=0x00b50e11 chip=0x011210de rev=0xb2 hdr=0x00
vendor = 'NVIDIA Corporation'
device = 'NV11 GeForce2 Go / MX Ultra'
class = display
subclass = VGA
isab0 at pci0:7:0: class=0x060100 card=0x00b50e11 chip=0x06861106 rev=0x40 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT82C686/A/B "Super South" PCI to ISA Bridge'
class = bridge
subclass = PCI-ISA
atapci0 at pci0:7:1: class=0x01018a card=0x00b50e11 chip=0x05711106 rev=0x06 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT82xxxx EIDE Controller (All VIA Chipsets)'
class = mass storage
subclass = ATA
isab1 at pci0:7:4: class=0x060100 card=0x00b50e11 chip=0x30571106 rev=0x40 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT82C686A/B ACPI Power Management Controller'
class = bridge
subclass = PCI-ISA
pcm0 at pci0:7:5: class=0x040100 card=0x00b50e11 chip=0x30581106 rev=0x50 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT8203058 AC97 Audio Codec (All VIA Chipsets)'
class = multimedia
subclass = audio
none3 at pci0:7:6: class=0x078000 card=0x00b50e11 chip=0x30681106 rev=0x30 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT82C686/A/B,VT8233/A Modem Codec'
class = simple comms
fxp0 at pci0:8:0: class=0x020000 card=0x00b50e11 chip=0x10598086 rev=0x10 hdr=0x00
vendor = 'Intel Corporation'
device = '82551QM Fast Ethernet PCI/CardBus Controller'
class = network
subclass = ethernet
none4 at pci0:10:0: class=0x020000 card=0x00d30e11 chip=0x05061114 rev=0x11 hdr=0x00
vendor = 'Atmel Corp.'
device = 'AT76C506 802.11b Wireless Network Adaptor'
class = network
subclass = ethernet
cbb0 at pci0:11:0: class=0x060700 card=0x00b50e11 chip=0xac55104c rev=0x01 hdr=0x02
vendor = 'Texas Instruments (TI)'
device = 'PCI1520 PC Card CardBus Controller'
class = bridge
subclass = PCI-CardBus
cbb1 at pci0:11:1: class=0x060700 card=0x00b50e11 chip=0xac55104c rev=0x01 hdr=0x02
vendor = 'Texas Instruments (TI)'
device = 'PCI1520 PC Card CardBus Controller'
class = bridge
subclass = PCI-CardBus
ohci0 at pci0:12:0: class=0x0c0310 card=0x00b50e11 chip=0x00351033 rev=0x41 hdr=0x00
vendor = 'NEC Electronics Hong Kong'
device = 'uPD9210FGC-7EA / µPD720101 USB 1.0 Host Controller (OHCI compliant)'
class = serial bus
subclass = USB
ohci1 at pci0:12:1: class=0x0c0310 card=0x00b50e11 chip=0x00351033 rev=0x41 hdr=0x00
vendor = 'NEC Electronics Hong Kong'
device = 'uPD9210FGC-7EA / µPD720101 USB 1.0 Host Controller (OHCI compliant)'
class = serial bus
subclass = USB
ehci0 at pci0:12:2: class=0x0c0320 card=0x00b50e11 chip=0x00e01033 rev=0x02 hdr=0x00
vendor = 'NEC Electronics Hong Kong'
device = 'uPD720100A/101 USB 2.0 Enhanced Host Controller'
class = serial bus
subclass = USB
More information about the freebsd-stable
mailing list