kernel problem

Thu Nov 10 06:00:07 PST 2005

On 11/10/05, Xin LI <delphij at gmail.com> wrote:
>
> On 11/10/05, Jens Holmqvist <zparta at gmail.com> wrote:
> [...]
> > > trap number = 30
> > > panic: unknown/reserved trap
> > > Uptime: 46m5s
>
> Looks weird. Would you please also attach the dmesg.boot generated
> with "boot -v" (or verbose boot if you use beastie boot menu), which
> may be helpful for us to figure out what was happening.
>
> Cheers,
>
ok here is my dmesg when i started it in verbose

Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-STABLE #0: Tue Nov 8 03:32:10 CET 2005
zparta at hispan.se:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0b55000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0b55188.
Calibrating clock(s) ... i8254 clock: 1193368 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1400600893 Hz
CPU: AMD Athlon(tm) XP 1600+ (1400.60-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x662 Stepping = 2
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>

AMD Features=0xc0480800<SYSCALL,MP,MMX+,3DNow+,3DNow>
Data TLB: 32 entries, fully associative
Instruction TLB: 16 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way
associative
L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory = 536805376 (511 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009ffff, 651264 bytes (159 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c25000 - 0x000000001f6b7fff, 514404352 bytes (125587 pages)
avail memory = 515964928 (492 MB)
MP Configuration Table version 1.4 found at 0xc00f1400
Table 'FACP' at 0x1fff3040
Table 'APIC' at 0x1fff6b00
MADT: Found table at 0x1fff6b00
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
ACPI APIC Table: <VIA694 AWRDACPI>
bios32: Found BIOS32 Service Directory header at 0xc00fb030
bios32: Entry = 0xfb4a0 (c00fb4a0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb4d0
pnpbios: Found PnP BIOS data at 0xc00fbfa0
pnpbios: Entry = f0000:bfd0 Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 0
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: low
ioapic0 <Version 0.2> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00040010 LDR: 0x01000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
io: <I/O>
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <VIA694 AWRDACPI> on motherboard
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80008840
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=30991106)
pcibios: BIOS version 2.10
Found $PIR table, 8 entries at 0xc00fdef0
PCI-Only Interrupts: 10 11 12
Location Bus Device Pin Link IRQs
slot 1 0 16 A 0x01 3 4 5 7 9 10 11 12 14 15
slot 1 0 16 B 0x02 3 4 5 7 9 10 11 12 14 15
slot 1 0 16 C 0x03 3 4 5 7 9 10 11 12 14 15
slot 1 0 16 D 0x04 3 4 5 7 9 10 11 12 14 15
slot 2 0 15 A 0x02 3 4 5 7 9 10 11 12 14 15
slot 2 0 15 B 0x04 3 4 5 7 9 10 11 12 14 15
slot 2 0 15 C 0x03 3 4 5 7 9 10 11 12 14 15
slot 2 0 15 D 0x01 3 4 5 7 9 10 11 12 14 15
slot 3 0 13 A 0x02 3 4 5 7 9 10 11 12 14 15
slot 3 0 13 B 0x01 3 4 5 7 9 10 11 12 14 15
slot 3 0 13 C 0x04 3 4 5 7 9 10 11 12 14 15
slot 3 0 13 D 0x03 3 4 5 7 9 10 11 12 14 15
slot 4 0 11 A 0x04 3 4 5 7 9 10 11 12 14 15
slot 4 0 11 B 0x01 3 4 5 7 9 10 11 12 14 15
slot 4 0 11 C 0x02 3 4 5 7 9 10 11 12 14 15
slot 4 0 11 D 0x03 3 4 5 7 9 10 11 12 14 15
slot 5 0 9 A 0x03 3 4 5 7 9 10 11 12 14 15
slot 5 0 9 B 0x04 3 4 5 7 9 10 11 12 14 15
slot 5 0 9 C 0x01 3 4 5 7 9 10 11 12 14 15
slot 5 0 9 D 0x02 3 4 5 7 9 10 11 12 14 15
slot 6 0 8 A 0x04 3 4 5 7 9 10 11 12 14 15
slot 6 0 8 B 0x02 3 4 5 7 9 10 11 12 14 15
slot 6 0 8 C 0x03 3 4 5 7 9 10 11 12 14 15
slot 6 0 8 D 0x01 3 4 5 7 9 10 11 12 14 15
slot 7 0 19 A 0x03 3 4 5 7 9 10 11 12 14 15
slot 7 0 19 B 0x04 3 4 5 7 9 10 11 12 14 15
slot 7 0 19 C 0x01 3 4 5 7 9 10 11 12 14 15
slot 7 0 19 D 0x02 3 4 5 7 9 10 11 12 14 15
embedded 0 1 A 0x01 3 4 5 7 9 10 11 12 14 15
embedded 0 1 B 0x02 3 4 5 7 9 10 11 12 14 15
embedded 0 1 C 0x03 3 4 5 7 9 10 11 12 14 15
embedded 0 1 D 0x04 3 4 5 7 9 10 11 12 14 15
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 17 func 0
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link1: <ACPI PCI Link LNKB> on acpi0
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link2: <ACPI PCI Link LNKC> irq 10 on acpi0
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link3: <ACPI PCI Link LNKD> irq 12 on acpi0
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 12 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 12 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link4: <ACPI PCI Link ALKA> on acpi0
pci_link4: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link4: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link4: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link5: <ACPI PCI Link ALKB> on acpi0
pci_link5: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link5: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link5: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link6: <ACPI PCI Link ALKC> on acpi0
pci_link6: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link6: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link6: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link7: <ACPI PCI Link ALKD> on acpi0
pci_link7: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link7: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link7: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 10 11 12 14 15
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0x4010
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port
0xcf8-0xcff,0x4000-0x407f,0x4080-0x40ff,0x5000-0x500f on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x1106, dev=0x3099, revid=0x00
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2210, cachelnsz=0 (dwords)
lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[10]: type 3, range 32, base e0000000, size 26, enabled
found-> vendor=0x1106, dev=0xb099, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x2230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x1076, revid=0x00
bus=0, slot=11, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0230, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=12
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 1, range 32, base e9020000, size 17, enabled
map[14]: type 1, range 32, base e9000000, size 17, enabled
map[18]: type 4, range 32, base 0000c000, size 6, enabled
pcib0: matched entry for 0.11.INTA
pcib0: slot 11 INTA hardwired to IRQ 19
found-> vendor=0x1106, dev=0x3074, revid=0x00
bus=0, slot=17, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0x0571, revid=0x06
bus=0, slot=17, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000c400, size 4, enabled
found-> vendor=0x1106, dev=0x3038, revid=0x1b
bus=0, slot=17, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=12
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000c800, size 5, enabled
pcib0: matched entry for 0.17.INTD (src \\_SB_.PCI0.ALKD:0)
pci_link7: Picked IRQ 9 with weight 0
pcib0: slot 17 INTD routed to irq 9 via \\_SB_.PCI0.ALKD
found-> vendor=0x1106, dev=0x3038, revid=0x1b
bus=0, slot=17, func=3
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=12
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000cc00, size 5, enabled
pcib0: matched entry for 0.17.INTD (src \\_SB_.PCI0.ALKD:0)
pcib0: slot 17 INTD routed to irq 9 via \\_SB_.PCI0.ALKD
found-> vendor=0x1106, dev=0x3038, revid=0x1b
bus=0, slot=17, func=4
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=12
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000d000, size 5, enabled
pcib0: matched entry for 0.17.INTD (src \\_SB_.PCI0.ALKD:0)
pcib0: slot 17 INTD routed to irq 9 via \\_SB_.PCI0.ALKD
found-> vendor=0x1103, dev=0x0004, revid=0x05
bus=0, slot=19, func=0
class=01-04-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0230, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000d400, size 3, enabled
map[14]: type 4, range 32, base 0000d800, size 2, enabled
map[18]: type 4, range 32, base 0000dc00, size 3, enabled
map[1c]: type 4, range 32, base 0000e000, size 2, enabled
map[20]: type 4, range 32, base 0000e400, size 8, enabled
pcib0: matched entry for 0.19.INTA
pcib0: slot 19 INTA hardwired to IRQ 18
agp0: <VIA 8367 (KT266/KY266x/KT333) host to PCI bridge> mem
0xe0000000-0xe3ffffff at device 0.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xe0000000
agp0: allocating GATT for aperture of size 256M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xe6000000-0xe7ffffff
pcib1: prefetched decode 0xe4000000-0xe5ffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x10de, dev=0x002d, revid=0x15
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
intpin=a, irq=11
powerspec 1 supports D0 D3 current D0
map[10]: type 1, range 32, base e6000000, size 24, enabled
pcib1: (null) requested memory range 0xe6000000-0xe6ffffff: good
map[14]: type 3, range 32, base e4000000, size 25, enabled
pcib1: (null) requested memory range 0xe4000000-0xe5ffffff: good
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
pcib1: slot 0 INTA is routed to irq 16
pci1: <display, VGA> at device 0.0 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7 > port
0xc000-0xc03f mem 0xe9020000-0xe903ffff,0xe9000000-0xe901ffff irq 19 at
device 11.0 on pci0
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xe9020000
em0: Reserved 0x40 bytes for rid 0x18 type 4 at 0xc000
em0: [MPSAFE]
em0: bpf attached
em0: Ethernet address: 00:0e:0c:5d:ee:d0
em0: Speed:N/A Duplex:N/A
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8233 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xc400-0xc40f at device 17.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xc400
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=50
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER>
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=7f ostat1=50
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat1=0x10 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=ff stat1=10 devices=0x8<ATAPI_SLAVE>
ata1: [MPSAFE]
uhci0: <VIA 83C572 USB controller> port 0xc800-0xc81f irq 9 at device
17.2on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xc800
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xcc00-0xcc1f irq 9 at device
17.3on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xcc00
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 9 at device
17.4on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd000
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
atapci1: <HighPoint HPT372 UDMA133 controller> port
0xd400-0xd407,0xd800-0xd803,0xdc00-0xdc07,0xe000-0xe003,0xe400-0xe4ff irq 18
at device 19.0 on pci0
atapci1: Reserved 0x100 bytes for rid 0x20 type 4 at 0xe400
atapci1: [MPSAFE]
ata2: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xd400
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xd800
ata2: reset tp1 mask=03 ostat0=7f ostat1=50
ata2: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata2: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata2: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata2: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata2: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata2: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata2: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata2: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata2: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata2: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata2: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata2: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata2: stat1=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=ff stat1=50 devices=0x2<ATA_SLAVE>
ata2: [MPSAFE]
ata3: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xdc00
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xe000
ata3: reset tp1 mask=03 ostat0=50 ostat1=50
ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata3: stat1=0x50 err=0x01 lsb=0x00 msb=0x00
ata3: reset tp2 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER>
ata3: [MPSAFE]
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: irq maps: 0xd001 0xd011 0xd001 0xd001
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
sio1: irq maps: 0xd001 0xd009 0xd001 0xd001
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Standard parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 on
acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
ahc_isa_probe 12: ioport 0xcc00 alloc failed
ahc_isa_probe 13: ioport 0xdc00 alloc failed
ex_isa_identify()
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xd0000-0xd0fff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 133389916 hz
Timecounter "TSC" frequency 1400600893 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
ata0-slave: pio=PIO4 wdma=WDMA2 udma=UDMA66 cable=40 wire
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=80 wire
ad0: setting PIO4 on VIA 8233 chip
ad0: setting UDMA100 on VIA 8233 chip
ad0: 29325MB <Maxtor 6E030L0 NAR61EA0> at ata0-master UDMA100
ad0: 60058656 sectors [59582C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad0
ad0: VIA check1 failed
ad0: Adaptec check1 failed
ad0: LSI (v3) check1 failed
ad0: LSI (v2) check1 failed
ad0: FreeBSD check1 failed
ad1: setting PIO4 on VIA 8233 chip
ad1: DMA limited to UDMA33, device found non-ATA66 cable
ad1: setting UDMA33 on VIA 8233 chip
ad1: 6187MB <FUJITSU MPE3064AT ED-03-04> at ata0-slave UDMA33
ad1: 12672450 sectors [13410C/15H/63S] 16 sectors/interrupt 1 depth queue
ad1: VIA check1 failed
ad1: Adaptec check1 failed
ad1: LSI (v3) check1 failed
ad1: LSI (v2) check1 failed
ad1: FreeBSD check1 failed
GEOM: new disk ad1
ata1-slave: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on VIA 8233 chip
acd0: setting UDMA33 on VIA 8233 chip
acd0: <ASUS CD-S400/A/V2.2H> CDROM drive at ata1 as slave
acd0: read 6875KB/s (6875KB/s), 128KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata0-slave: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=80 wire
ad5: setting PIO4 on HighPoint chip
ad5: setting UDMA133 on HighPoint chip
ad5: 117246MB <Maxtor 6Y120L0 YAR41BW0> at ata2-slave UDMA133
ad5: 240121728 sectors [238216C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad5
ad5: HighPoint (v3) check1 failed
ad5: HighPoint (v2) check1 failed
ad5: Adaptec check1 failed
ad5: LSI (v3) check1 failed
ad5: LSI (v2) check1 failed
ad5: FreeBSD check1 failed
ata1-slave: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=80 wire
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=80 wire
ad6: setting PIO4 on HighPoint chip
ad6: setting UDMA133 on HighPoint chip
ad6: 194481MB <Maxtor 6B200P0 BAH41B70> at ata3-master UDMA133
ad6: 398297088 sectors [395136C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad6
ad6: HighPoint (v3) check1 failed
****** ATA Highpoint V2 RocketRAID Metadata *****
magic 0x5a7816f0
magic_0 0xce230623
magic_1 0x00000000
order 0x00000004
array_width 2
stripe_shift 7
type RAID0
disk_number 0
total_sectors 796593920
disk_mode 0x00000000
boot_mode 0x00000000
boot_disk 0x00
boot_protect 0x00
log_entries 0x00
log_index 0x00
rebuild_lba 0x7fffffff
dummy_1 0x00
name_1 <RAID_0>
dummy_2 0x00
name_2 <>
=================================================
ad7: setting PIO4 on HighPoint chip
ad7: setting UDMA133 on HighPoint chip
ad7: 194481MB <Maxtor 6B200P0 BAH41B70> at ata3-slave UDMA133
ad7: 398297088 sectors [421478C/15H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad7
ad7: HighPoint (v3) check1 failed
****** ATA Highpoint V2 RocketRAID Metadata *****
magic 0x5a7816f0
magic_0 0xce230623
magic_1 0x00000000
order 0x00000004
array_width 2
stripe_shift 7
type RAID0
disk_number 1
total_sectors 796593920
disk_mode 0x00000000
boot_mode 0x00000000
boot_disk 0x00
boot_protect 0x00
log_entries 0x00
log_index 0x00
rebuild_lba 0x7fffffff
dummy_1 0x00
name_1 <RAID_0>
dummy_2 0x00
name_2 <>
=================================================
ATA PseudoRAID loaded
********** ATA PseudoRAID ar0 Metadata **********
=================================================
format HighPoint v2 RocketRAID
type RAID0
flags 0x00 0
magic_0 0x00000000ce230623
magic_1 0x0000000000000000
generation 0
total_sectors 796593920
offset_sectors 10
heads 255
sectors 63
cylinders 49585
width 2
interleave 128
total_disks 2
disk 0: flags = 0x0b b<ONLINE,ASSIGNED,PRESENT>
ad6: sectors 398296960
disk 1: flags = 0x0b b<ONLINE,ASSIGNED,PRESENT>
ad7: sectors 398296960
=================================================
ar0: 388961MB <HighPoint v2 RocketRAID RAID0 (stripe 64 KB)> status: READY
ar0: 796593920 sectors [49585C/255H/63S] <RAID_0> subdisks defined as:
ar0: disk0 READY using ad6 at ata3-master
ar0: disk1 READY using ad7 at ata3-slave
ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0
ioapic0: routing intpin 3 (ISA IRQ 3) to cluster 0
ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0
ioapic0: routing intpin 6 (ISA IRQ 6) to cluster 0
ioapic0: routing intpin 7 (ISA IRQ 7) to cluster 0
ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0
ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0
ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0
ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0
ioapic0: routing intpin 18 (PCI IRQ 18) to cluster 0
ioapic0: routing intpin 19 (PCI IRQ 19) to cluster 0
GEOM: new disk ar0
Trying to mount root from ufs:/dev/ad0s1a
start_init: trying /sbin/init
em0: Link is up 100 Mbps Full Duplex
em0: Link is up 100 Mbps Full Duplex
em0: Link is up 100 Mbps Full Duplex