Problems with HP dx5150/ATI Xpress 200 chipset
Jeffrey Williams
jeff at sailorfej.net
Wed Nov 2 15:19:37 PST 2005
I have recently purchased a number HP DX5150 SFF desktops with idea of
using them as basic infrastructure servers (e.g. DNS, DHCP, and
firewall). I prefer to use -stable versions of FreeBSD and OpenBSD.
Following are the specs on the boxes:
HP dx5150
AMD Sempron 3000+
ATI Radeon Xpress 200 chipset
ATI SATA/100 hdd
ATI USB
ATI Integrated Graphics
Broadcom BCM5751 network
HP/ATI specific Award bios, v1.06
I have tried installs with fbsd 4.11, 5.4 and obsd 3.7 and 3.8. I have
done enough searching of mailing lists and google to know that this
chipset is problematic at the moment for BSD and for that matter linux,
however I hoping that someone can suggest fixes, work arounds, and
expected upcoming releases that will allow me to run these boxes
reliably on stable versions of fbsd and obsd.
For all the installs I made the following changes to the default BIOS
settings:
Advanced Chipset features:
GFX Multi-Function Mode: disabled
UMA Frame Buffer Size: 16M
Video Display Devices: CRT only
Init Display First: Onboard
fbsd 4.11 was the only one I was able to get to install fully and with
basic functionality, including network working. Although I am not
confident in its long term stability (continuous stray IRQ errors,
incorrect drive geometry detection which is not correctable via fdisk,
disfunctional APM)
fbsd 5.4 boot fails unless APIC mode is completely disabled under
Advanced BIOS Features, I tried it active with both MPS versions 1.1 and
1.4. It will boot fully with APIC disabled but the bge driver fails to
initialize and drive geometry is incorrectly detected as in 4.11, and
the install invariably fails with a panic at various point during the
copying of files to the new volumes (possibly to bad drive geometry?).
APM driver(s) also seem to fail initialization.
obsd 3.7 boots and installs, but unless USB Legacy support under
Integrated Perifpherals/OnChip USB Controller is disabled the PS/2
attached keyboard ceases to function (stalling install at the
install/upgrade/shell prompt unless using serial console). As with
fbsd5.4 the bge driver and apm driver(s) fail to initialize. obsd also
incorrectly detects drive geometry but gets closer to the actual numbers
fbsd, I did not try to manually correct, I am not as
familiar/comfortable with openbsd's disklabel, the drive did "seem" more
stable.
obsd 3.8 boot fails completely unless USB Legacy support is disabled,
with it disabled I was able to complete the install, however as with 3.7
and fbsd5.4 the bge and apm drivers fail to initialize.
APIC settings did not seem to affect obsd boot or installs, also there
are no specific BIOS settings specifically identifying the installed OS
as PNP or not. The PNP settings consist of "Reset Confifuration Data
[enable/disable]", "Resources Controlled By [Auto(ESCD)/Manual]" with a
Manual sub-menu of "IRQ x [PCI/reserved]", "Assign IRQ for VGA
[enable/disable]", and "Assign IRQ for USB [enable/disable]".
Manipulation of these settings had no apparent effect on the obsd or
fbsd booting.
Attached are the dmesg dumps from the various boot/install attempts, if
you need any other info to help diagnose please let me know. I am
hoping someone can help me get these to work, as I am not looking for
forward to trying to return them to the vendor.
Thanks
Jeffrey Williams
jeff at sailorfej.net
dmesgs for fbsd4.11, fbsd5.4-APIC1.1, fbsd5.4-APIC1.4, fbsd5.4-noAPIC,
obsd3.7-legUSB, obsd3.7-nolegUSB, obsd3.8-legUSB, obsd3.8-nolegUSB
*************************************
************************** fbsd 4.11
*************************************
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.11-RELEASE #0: Fri Jan 21 17:21:22 GMT 2005
root at perseus.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD Sempron(tm) Processor 3000+ (1790.84-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x10ff0 Stepping = 0
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
AMD Features=0xc0500000<<b20>,AMIE,DSP,3DNow!>
real memory = 233766912 (228288K bytes)
avail memory = 221896704 (216696K bytes)
Preloaded elf kernel "kernel" at 0xc055c000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib5: <PCI to PCI bridge (vendor=1002 device=5a3f)> at device 1.0 on pci0
pci1: <PCI bus> on pcib5
pci1: <ATI model 5954 graphics accelerator> at 5.0 irq 11
pcib6: <PCI to PCI bridge (vendor=1002 device=5a37)> at device 5.0 on pci0
pci2: <PCI bus> on pcib6
bge0: <Broadcom BCM5751 Gigabit Ethernet, ASIC rev. 0x4200> mem
0xfdef0000-0xfdefffff irq 11 at device 0.0 on pci2
bge0: Ethernet address: 00:13:d3:95:43:b9
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
atapci0: <Generic PCI ATA controller> port
0xec00-0xec0f,0xf000-0xf003,0xf400-0xf407,0xf800-0xf803,0xfc00-0xfc07
mem 0xfe02f000-0xfe02f1ff irq 5 at device 18.0 on pci0
ata2: at 0xfc00 on atapci0
ata3: at 0xf400 on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xfe02e000-0xfe02efff irq 10
at device 19.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1002) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xfe02d000-0xfe02dfff irq 10
at device 19.1 on pci0
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: (0x1002) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
pci0: <USB controller> at 19.2 irq 10
pci0: <unknown card> (vendor=0x1002, dev=0x4372) at 20.0
atapci1: <Generic PCI ATA controller> port
0xe400-0xe40f,0-0x3,0-0x7,0-0x3,0-0x7 at device 20.1 on pci0
ata0: at 0x1f0 irq 14 on atapci1
ata1: at 0x170 irq 15 on atapci1
isab0: <PCI to ISA bridge (vendor=1002 device=4377)> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib7: <PCI to PCI bridge (vendor=1002 device=4371)> at device 20.4 on pci0
pci3: <PCI bus> on pcib7
pcib1: <Host to PCI bridge> on motherboard
pci4: <PCI bus> on pcib1
pcib2: <Host to PCI bridge> on motherboard
pci5: <PCI bus> on pcib2
pcib3: <Host to PCI bridge> on motherboard
pci6: <PCI bus> on pcib3
pcib4: <Host to PCI bridge> on motherboard
pci7: <PCI bus> on pcib4
orm0: <Option ROMs> at iomem 0xc0000-0xcbfff,0xcc000-0xcffff on isa0
pmtimer0 on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: parallel port not found.
ad4: DMA limited to UDMA33, non-ATA66 cable or device
ad4: 38166MB <ST340014AS> [77545/16/63] at ata2-master BIOSDMA
acd0: CDROM <LITE-ON CD-ROM LTN-489S> at ata0-master PIO4
Mounting root from ufs:/dev/ad4s1a
swapon: adding /dev/ad4s1b as swap device
Automatic boot in progress...
/dev/ad4s1a:
FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad4s1a:
clean, 233536 free
(808 frags, 29091 blocks, 0.3% fragmentation)
/dev/ad4s1f:
FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad4s1f:
clean, 17702306 free
(66842 frags, 2204433 blocks, 0.4% fragmentation)
/dev/ad4s1e:
FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad4s1e:
clean, 515154 free
(34 frags, 64390 blocks, 0.0% fragmentation)
Doing initial network setup:
hostname
.
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=3<RXCSUM,TXCSUM>
inet 192.168.150.62 netmask 0xffffff00 broadcast 192.168.150.255
inet6 fe80::213:d3ff:fe95:43b9%bge0 prefixlen 64 tentative scopeid 0x1
ether 00:13:d3:95:43:b9
media: Ethernet autoselect (none)
status: no carrier
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
inet 127.0.0.1 netmask 0xff000000
add net default: gateway 192.168.150.1
Additional routing options:
TCP keepalive=YES
.
Routing daemons:
.
Additional daemons:
syslogd
.
Doing additional network setup:
.
Starting final network daemons:
.
ELF ldconfig path: /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout /usr/X11R6/lib/aout
Starting standard daemons:
cron
sshd
usbd
.
Initial rc.i386 initialization:
apm
.
Configuring syscons:
blanktime
.
Additional ABI support:
.
Local package initialization:
.
Additional TCP options:
.
Tue Nov 1 12:51:32 PST 2005
stray irq 7
Nov 1 12:51:39 eons2 /kernel: stray irq 7
stray irq 7
Nov 1 12:51:39 eons2 /kernel: stray irq 7
stray irq 7
too many stray irq 7's; not logging any more
Nov 1 12:53:14 eons2 /kernel: stray irq 7
Nov 1 12:53:14 eons2 /kernel: too many stray irq 7's; not logging any more
Nov 1 12:54:59 eons2 login: ROOT LOGIN (root) ON ttyv0
*************************************
************************** fbsd5.4-APIC1.1
*************************************
/boot/kernel/acpi.ko text=0x414fc data=0x1dc4+0x112c
syms=[0x4+0x7670+0x4+0x9d05]
SMAP type=01 base=0000000000000000 len=000000000009f800
SMAP type=02 base=00000000000f0000 len=0000000000010000
SMAP type=02 base=00000000fec00000 len=0000000001400000
SMAP type=02 base=00000000e0000000 len=0000000010000000
SMAP type=03 base=000000000eef3000 len=000000000000d000
SMAP type=04 base=000000000eef0000 len=0000000000003000
SMAP type=02 base=000000000009f800 len=0000000000000800
SMAP type=01 base=0000000000100000 len=000000000edf0000
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-RELEASE #0: Sun May 8 10:21:06 UTC 2005
root at harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a36000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a3621c.
Table 'FACP' at 0xeef30c0
Table 'SSDT' at 0xeef6780
Table 'SRAT' at 0xeef6880
Table '' at 0xeef6980
Table 'ASF!' at 0xeef6a00
Table 'APIC' at 0xeef66c0
MADT: Found table at 0xeef66c0
MP Configuration Table version 1.1 found at 0xc00f24f4
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
MADT: Found CPU APIC ID 1 ACPI ID 1: disabled
ACPI APIC Table: <HP AWRDACPI>
Calibrating clock(s) ... i8254 clock: 1193222 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1790840677 Hz
CPU: AMD Sempron(tm) Processor 3000+ (1790.84-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x10ff0 Stepping = 0
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
AMD Features=0xc0500000<NX,AMIE,DSP,3DNow!>
Data TLB: 32 entries, fully associative
Instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way
associative
L2 internal cache: 128 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory = 250544128 (238 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c25000 - 0x000000000ea8bfff, 233205760 bytes (56935 pages)
avail memory = 235614208 (224 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fab20
bios32: Entry = 0xfb130 (c00fb130) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb1a0
pnpbios: Found PnP BIOS data at 0xc00fbc80
pnpbios: Entry = f0000:bcb0 Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 0
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: Interrupt override: source 9, irq 21
ioapic0: intpin 9 disabled
ioapic0: intpin 21 trigger: level
ioapic0: intpin 21 polarity: low
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: active-high
MADT: Ignoring local NMI routed to ACPI CPU 1
ioapic0 <Version 2.1> irqs 0-23 on motherboard
cpu0
*************************************
************************** fbsd5.4-APIC1.4
*************************************
/boot/kernel/acpi.ko text=0x414fc data=0x1dc4+0x112c
syms=[0x4+0x7670+0x4+0x9d05]
SMAP type=01 base=0000000000000000 len=000000000009f800
SMAP type=02 base=00000000000f0000 len=0000000000010000
SMAP type=02 base=00000000fec00000 len=0000000001400000
SMAP type=02 base=00000000e0000000 len=0000000010000000
SMAP type=03 base=000000000eef3000 len=000000000000d000
SMAP type=04 base=000000000eef0000 len=0000000000003000
SMAP type=02 base=000000000009f800 len=0000000000000800
SMAP type=01 base=0000000000100000 len=000000000edf0000
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-RELEASE #0: Sun May 8 10:21:06 UTC 2005
root at harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a36000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a3621c.
Table 'FACP' at 0xeef30c0
Table 'SSDT' at 0xeef6780
Table 'SRAT' at 0xeef6880
Table '' at 0xeef6980
Table 'ASF!' at 0xeef6a00
Table 'APIC' at 0xeef66c0
MADT: Found table at 0xeef66c0
MP Configuration Table version 1.4 found at 0xc00f24f4
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
MADT: Found CPU APIC ID 1 ACPI ID 1: disabled
ACPI APIC Table: <HP AWRDACPI>
Calibrating clock(s) ... i8254 clock: 1193226 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1790839408 Hz
CPU: AMD Sempron(tm) Processor 3000+ (1790.84-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x10ff0 Stepping = 0
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
AMD Features=0xc0500000<NX,AMIE,DSP,3DNow!>
Data TLB: 32 entries, fully associative
Instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way
associative
L2 internal cache: 128 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory = 250544128 (238 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c25000 - 0x000000000ea8bfff, 233205760 bytes (56935 pages)
avail memory = 235614208 (224 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fab20
bios32: Entry = 0xfb130 (c00fb130) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb1a0
pnpbios: Found PnP BIOS data at 0xc00fbc80
pnpbios: Entry = f0000:bcb0 Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 0
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: Interrupt override: source 9, irq 21
ioapic0: intpin 9 disabled
ioapic0: intpin 21 trigger: level
ioapic0: intpin 21 polarity: low
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: active-high
MADT: Ignoring local NMI routed to ACPI CPU 1
ioapic0 <Version 2.1> irqs 0-23 on motherboard
cpu0 B
*************************************
************************** fbsd5.4-noAPIC
*************************************
/boot/kernel/acpi.ko text=0x414fc data=0x1dc4+0x112c
syms=[0x4+0x7670+0x4+0x9d05]
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-RELEASE #0: Sun May 8 10:21:06 UTC 2005
root at harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
mptable_probe: MP Config Table has bad signature:
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Sempron(tm) Processor 3000+ (1790.83-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x10ff0 Stepping = 0
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
AMD Features=0xc0500000<NX,AMIE,DSP,3DNow!>
real memory = 250544128 (238 MB)
avail memory = 235614208 (224 MB)
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <HP AWRDACPI> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 5.0 (no driver attached)
pcib2: <PCI-PCI bridge> at device 5.0 on pci0
pci2: <PCI bus> on pcib2
bge0: <Broadcom BCM5751 Gigabit Ethernet, ASIC rev. 0x4200> mem
0xfdef0000-0xfdefffff irq 11 at device 0.0 on pci2
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bge0: Ethernet address: 00:13:d3:95:43:b9
atapci0: <GENERIC ATA controller> port
0xec00-0xec0f,0xf000-0xf003,0xf400-0xf407,0xf800-0xf803,0xfc00-0xfc07
irq 5 at device 18.0 on pci0
ata2: channel #0 on atapci0
ata3: channel #1 on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xfe02e000-0xfe02efff irq 10
at device 19.0 on pci0
usb0: OHCI version 1.0, legacy support
stray irq7
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1002) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xfe02d000-0xfe02dfff irq 10
at device 19.1 on pci0
usb1: OHCI version 1.0, legacy support
stray irq7
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: (0x1002) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
pci0: <serial bus, USB> at device 19.2 (no driver attached)
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci1: <GENERIC ATA controller> port
0xe400-0xe40f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 20.1 on pci0
ata0: channel #0 on atapci1
ata1: channel #1 on atapci1
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci3: <ACPI PCI bus> on pcib3
acpi_tz0: <Thermal Zone> on acpi0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A, console
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4
orm0: <ISA Option ROMs> at iomem
0xd0000-0xd17ff,0xcc000-0xcffff,0xc0000-0xcbfff on isa0
pmtimer0 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1790834539 Hz quality 800
Timecounters tick every 10.000 msec
acd0: CDROM <LITE-ON CD-ROM LTN-489S/8QS4> at ata0-master PIO4
ad4: 38166MB <ST340014AS/3.43> [77545/16/63] at ata2-master UDMA33
Mounting root from ufs:/dev/ad4s1a
Pre-seeding PRNG: kickstart.
Loading configuration files.
Entropy harvesting: interrupts ethernet point_to_point kickstart.
swapon: adding /dev/ad4s1b as swap device
Starting file system checks:
/dev/ad4s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
Idev/ad4s1a: clWean, 230032 freeA (1512 frags, 28R565 blocks, 0.6%N
fragmentation)
N/dev/ad4s1e: DEFGER FOR BACKGROUN:D CHECKING
/usr stray irq7
was notstray irq7
properltoo many stray irq 7's: not logging anymore
y dismounted
/dev/ad4s1d: DEFER FOR BACKGROUNWD CHECKING
ARNING: /var was not properly dismounted
Setting hostname: .
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
Additional routing options:.
Starting devd.
Mounting NFS file systems:.
Starting syslogd.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout
Starting local daemons:.
Updating motd.
Configuring syscons: blanktime.
Initial i386 initialization:.
Additional ABI support:.
Starting cron.
Local package initialization:.
Additional TCP options:.
Starting background file system checks in 60 seconds.
Wed Nov 2 16:26:42 UTC 2005
*************************************
************************** obsd3.7-legUSB
*************************************
booting fd0a:/bsd: 4302596+825452=0x4e40b8
entry point at 0x100120
í
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2005 OpenBSD. All rights reserved.
http://www.OpenBSD.org
OpenBSD 3.7 (RAMDISK_CD) #573: Sun Mar 20 00:27:05 MST 2005
deraadt at i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: AMD Sempron(tm) Processor 3000+ ("AuthenticAMD" 686-class) 1.80 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2
real mem = 250126336 (244264K)
avail mem = 222449664 (217236K)
using 3078 buffers containing 12607488 bytes (12312K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(05) BIOS, date 09/07/05, BIOS32 rev. 0 @ 0xfb130
apm0 at bios0: Power Management spec V1.2
apm0: APM engage (device 1): interface not connected (3)
apm0: APM get event: interface not connected (3)
apm0: APM get event: interface not connected (3)
apm0: APM system defaults failed: interface not connected (3)
apm0: APM disconnect failed: interface not connected (3)
pcibios0 at bios0: rev 3.0 @ 0xf0000/0xd8a4
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfd7d0/192 (10 entries)
pcibios0: bad IRQ table checksum
pcibios0: PCI BIOS has 11 Interrupt Routing table entries
pcibios0: PCI Exclusive IRQs: 5 10 11
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #3 is the last bus
WARNING: can't reserve area for I/O APIC.
WARNING: can't reserve area for Local APIC.
WARNING: can't reserve area for BIOS PROM.
bios0: ROM list: 0xc0000/0xc000 0xcc000/0x4000! 0xd0000/0x1800
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 vendor "ATI", unknown product 0x5950 rev 0x01
ppb0 at pci0 dev 1 function 0 vendor "ATI", unknown product 0x5a3f rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 vendor "ATI", unknown product 0x5954 rev 0x00
wsdisplay0 at vga1: console (80x25, vt100 emulation)
ppb1 at pci0 dev 5 function 0 vendor "ATI", unknown product 0x5a37 rev 0x00
pci2 at ppb1 bus 2
bge0 at pci2 dev 0 function 0 "Broadcom BCM5751" rev 0x20, unknown
BCM5750 (0x4200): irq 11bge0: RX CPU self-diagnostics failed!
bge0: chip initialization failed
pciide0 at pci0 dev 18 function 0 vendor "ATI", unknown product 0x4379
rev 0x00: DMA (unsupported), channel 0 configured to native-PCI, channel
1 configured to native-PCI
pciide0: using irq 5 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <ST340014AS>
wd0: 16-sector PIO, LBA48, 38166MB, 78165360 sectors
pciide0: channel 1 ignored (not responding; disabled or no drives?)
ohci0 at pci0 dev 19 function 0 vendor "ATI", unknown product 0x4374 rev
0x00: irq 10, version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ohci1 at pci0 dev 19 function 1 vendor "ATI", unknown product 0x4375 rev
0x00: irq 10, version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
ehci0 at pci0 dev 19 function 2 vendor "ATI", unknown product 0x4373 rev
0x00: irq 10
ehci0: EHCI version 1.0
ehci0: companion controllers, 4 ports each: ohci0 ohci1
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: single transaction translator
uhub2: 8 ports with 8 removable, self powered
vendor "ATI", unknown product 0x4372 (class serial bus subclass SMBus,
rev 0x10) at pci0 dev 20 function 0 not configured
pciide1 at pci0 dev 20 function 1 vendor "ATI", unknown product 0x4376
rev 0x00: DMA (unsupported), channel 0 configured to compatibility,
channel 1 wired to compatibility
atapiscsi0 at pciide1 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <LITE-ON, CD-ROM LTN-489S, 8QS4> SCSI0
5/cdrom removable
pciide1: channel 1 ignored (not responding; disabled or no drives?)
pcib0 at pci0 dev 20 function 3 vendor "ATI", unknown product 0x4377 rev
0x00
ppb2 at pci0 dev 20 function 4 vendor "ATI", unknown product 0x4371 rev
0x00
pci3 at ppb2 bus 3
pchb1 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb4 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
kbc: cmd word write error
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
biomask f7ef netmask ffef ttymask ffef
rd0: fixed, 3800 blocks
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
*************************************
************************** obsd3.7-nolegUSB
*************************************
>> OpenBSD/i386 BOOT 2.06
boot>
booting hd0a:/bsd: 4686240+945680 [52+241328+223324]=0x5d0864
entry point at 0x100120
í
[ using 465076 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2005 OpenBSD. All rights reserved.
http://www.OpenBSD.org
OpenBSD 3.7 (GENERIC) #50: Sun Mar 20 00:01:57 MST 2005
deraadt at i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Sempron(tm) Processor 3000+ ("AuthenticAMD" 686-class) 1.80 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2
real mem = 233349120 (227880K)
avail mem = 206032896 (201204K)
using 2874 buffers containing 11771904 bytes (11496K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(05) BIOS, date 09/07/05, BIOS32 rev. 0 @ 0xfb130
apm0 at bios0: Power Management spec V1.2
apm0: APM engage (device 1): interface not connected (3)
apm0: AC on, battery charge unknown
apm0: APM set CPU busy: interface not connected (3)
apm0: APM get event: interface not connected (3)
apm0: APM get event: interface not connected (3)
apm0: APM system defaults failed: interface not connected (3)
apm0: APM disconnect failed: interface not connected (3)
pcibios0 at bios0: rev 3.0 @ 0xf0000/0xd8a4
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfd7d0/192 (10 entries)
pcibios0: bad IRQ table checksum
pcibios0: PCI BIOS has 11 Interrupt Routing table entries
pcibios0: PCI Exclusive IRQs: 5 10 11
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #3 is the last bus
WARNING: can't reserve area for I/O APIC.
WARNING: can't reserve area for Local APIC.
WARNING: can't reserve area for BIOS PROM.
bios0: ROM list: 0xc0000/0xc000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 vendor "ATI", unknown product 0x5950 rev 0x01
ppb0 at pci0 dev 1 function 0 vendor "ATI", unknown product 0x5a3f rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 vendor "ATI", unknown product 0x5954 rev 0x00
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 5 function 0 vendor "ATI", unknown product 0x5a37 rev 0x00
pci2 at ppb1 bus 2
bge0 at pci2 dev 0 function 0 "Broadcom BCM5751" rev 0x20, unknown
BCM5750 (0x4200): irq 11bge0: RX CPU self-diagnostics failed!
bge0: chip initialization failed
pciide0 at pci0 dev 18 function 0 vendor "ATI", unknown product 0x4379
rev 0x00: DMA (unsupported), channel 0 configured to native-PCI, channel
1 configured to native-PCI
pciide0: using irq 5 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <ST340014AS>
wd0: 16-sector PIO, LBA48, 38166MB, 78165360 sectors
pciide0: channel 1 ignored (not responding; disabled or no drives?)
ohci0 at pci0 dev 19 function 0 vendor "ATI", unknown product 0x4374 rev
0x00: irq 10, version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ohci1 at pci0 dev 19 function 1 vendor "ATI", unknown product 0x4375 rev
0x00: irq 10, version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
ehci0 at pci0 dev 19 function 2 vendor "ATI", unknown product 0x4373 rev
0x00: irq 10
ehci0: EHCI version 1.0
ehci0: companion controllers, 4 ports each: ohci0 ohci1
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: single transaction translator
uhub2: 8 ports with 8 removable, self powered
vendor "ATI", unknown product 0x4372 (class serial bus subclass SMBus,
rev 0x10) at pci0 dev 20 function 0 not configured
pciide1 at pci0 dev 20 function 1 vendor "ATI", unknown product 0x4376
rev 0x00: DMA (unsupported), channel 0 configured to compatibility,
channel 1 wired to compatibility
atapiscsi0 at pciide1 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <LITE-ON, CD-ROM LTN-489S, 8QS4> SCSI0
5/cdrom removable
pciide1: channel 1 ignored (not responding; disabled or no drives?)
pcib0 at pci0 dev 20 function 3 vendor "ATI", unknown product 0x4377 rev
0x00
ppb2 at pci0 dev 20 function 4 vendor "ATI", unknown product 0x4371 rev
0x00
pci3 at ppb2 bus 3
pchb1 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb4 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using
wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
biomask e7ed netmask efed ttymask ffef
pctr: user-level cycle counter enabled
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
Automatic boot in progress: starting file system checks.
/dev/rwd0a: file system is clean; not checking
/dev/rwd0e: file system is clean; not checking
/dev/rwd0d: file system is clean; not checking
setting tty flags
starting network
starting system logger
starting rpc daemons:.
savecore: no core dump
checking quotas: done.
building ps databases: kvm dev.
clearing /tmp
starting pre-securelevel daemons:.
setting kernel security level: kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files
starting network daemons: sendmail inetd sshd.
starting local daemons:.
standard daemons: cron.
Tue Nov 1 07:22:24 PST 2005
*************************************
************************** obsd3.8-legUSB
*************************************
booting hd0a:/bsd: 4804352+939504 [52+247280+228802]=0x5eea4c
entry point at 0x100120
í
[ using 476508 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2005 OpenBSD. All rights reserved.
http://www.OpenBSD.org
OpenBSD 3.8 (GENERIC) #138: Sat Sep 10 15:41:37 MDT 2005
deraadt at i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Sempron(tm) Processor 3000+ ("AuthenticAMD" 686-class, 128KB
L2 cache) 1.80 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2
cpu0: AMD Powernow: FID VID TTP TM
real mem = 233349120 (227880K)
avail mem = 205914112 (201088K)
using 2874 buffers containing 11771904 bytes (11496K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(05) BIOS, date 09/07/05, BIOS32 rev. 0 @ 0xfb130
apm0 at bios0: Power Management spec V1.2
apm0: APM engage (device 1): interface not connected (3)
apm0: AC on, battery charge unknown
apm0: APM get event: interface not connected (3)
apm0: APM get event: interface not connected (3)
apm0: APM system defaults failed: interface not connected (3)
apm0: APM disconnect failed: interface not connected (3)
apm0: flags 70102 dobusy 0 doidle 0
pcibios0 at bios0: rev 3.0 @ 0xf0000/0xd8a4
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfd7d0/192 (10 entries)
pcibios0: bad IRQ table checksum
pcibios0: PCI BIOS has 11 Interrupt Routing table entries
pcibios0: PCI Exclusive IRQs: 5 10 11
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #3 is the last bus
WARNING: can't reserve area for I/O APIC.
WARNING: can't reserve area for Local APIC.
WARNING: can't reserve area for BIOS PROM.
bios0: ROM list: 0xc0000/0xc000 0xcc000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ATI RS480 Host" rev 0x01
ppb0 at pci0 dev 1 function 0 "ATI RS480 PCIE" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 "ATI Radeon XPRESS 200" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 5 function 0 vendor "ATI", unknown product 0x5a37 rev 0x00
pci2 at ppb1 bus 2
bge0 at pci2 dev 0 function 0 "Broadcom BCM5751" rev 0x20, BCM5750 C0
(0x4200): irq 11bge0: RX CPU self-diagnostics failed!
bge0: chip initialization failed
pciide0 at pci0 dev 18 function 0 "ATI IXP400 SATA" rev 0x00: DMA
pciide0: using irq 5 for native-PCI interrupt
pciide0: port 0: device present, speed: 1.5Gb/s
wd0 at pciide0 channel 0 drive 0: <ST340014AS>
wd0: 16-sector PIO, LBA48, 38166MB, 78165360 sectors
wd0(pciide0:0:0): using BIOS timings, Ultra-DMA mode 5
ohci0 at pci0 dev 19 function 0 "ATI IXP400 USB" rev 0x00: irq 10,
version 1.0, legacy support
*************************************
************************** obsd3.8-nolegUSB
*************************************
booting hd0a:/bsd: 4804352+939504 [52+247280+228802]=0x5eea4c
entry point at 0x100120
í
[ using 476508 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2005 OpenBSD. All rights reserved.
http://www.OpenBSD.org
OpenBSD 3.8 (GENERIC) #138: Sat Sep 10 15:41:37 MDT 2005
deraadt at i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Sempron(tm) Processor 3000+ ("AuthenticAMD" 686-class, 128KB
L2 cache) 1.80 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2
cpu0: AMD Powernow: FID VID TTP TM
real mem = 233349120 (227880K)
avail mem = 205914112 (201088K)
using 2874 buffers containing 11771904 bytes (11496K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(05) BIOS, date 09/07/05, BIOS32 rev. 0 @ 0xfb130
apm0 at bios0: Power Management spec V1.2
apm0: APM engage (device 1): interface not connected (3)
apm0: AC on, battery charge unknown
apm0: APM get event: interface not connected (3)
apm0: APM get event: interface not connected (3)
apm0: APM system defaults failed: interface not connected (3)
apm0: APM disconnect failed: interface not connected (3)
apm0: flags 70102 dobusy 0 doidle 0
pcibios0 at bios0: rev 3.0 @ 0xf0000/0xd8a4
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfd7d0/192 (10 entries)
pcibios0: bad IRQ table checksum
pcibios0: PCI BIOS has 11 Interrupt Routing table entries
pcibios0: PCI Exclusive IRQs: 5 10 11
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #3 is the last bus
WARNING: can't reserve area for I/O APIC.
WARNING: can't reserve area for Local APIC.
WARNING: can't reserve area for BIOS PROM.
bios0: ROM list: 0xc0000/0xc000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ATI RS480 Host" rev 0x01
ppb0 at pci0 dev 1 function 0 "ATI RS480 PCIE" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 "ATI Radeon XPRESS 200" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 5 function 0 vendor "ATI", unknown product 0x5a37 rev 0x00
pci2 at ppb1 bus 2
bge0 at pci2 dev 0 function 0 "Broadcom BCM5751" rev 0x20, BCM5750 C0
(0x4200): irq 11bge0: RX CPU self-diagnostics failed!
bge0: chip initialization failed
pciide0 at pci0 dev 18 function 0 "ATI IXP400 SATA" rev 0x00: DMA
pciide0: using irq 5 for native-PCI interrupt
pciide0: port 0: device present, speed: 1.5Gb/s
wd0 at pciide0 channel 0 drive 0: <ST340014AS>
wd0: 16-sector PIO, LBA48, 38166MB, 78165360 sectors
wd0(pciide0:0:0): using BIOS timings, Ultra-DMA mode 5
ohci0 at pci0 dev 19 function 0 "ATI IXP400 USB" rev 0x00: irq 10,
version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: ATI OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ohci1 at pci0 dev 19 function 1 "ATI IXP400 USB" rev 0x00: irq 10,
version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: ATI OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
ehci0 at pci0 dev 19 function 2 "ATI IXP400 USB2" rev 0x00: irq 10
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: ATI EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 8 ports with 8 removable, self powered
"ATI IXP400 SMBus" rev 0x10 at pci0 dev 20 function 0 not configured
pciide1 at pci0 dev 20 function 1 "ATI IXP400 IDE" rev 0x00: DMA
(unsupported), channel 0 configured to compatibility, channel 1 wired to
compatibility
atapiscsi0 at pciide1 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <LITE-ON, CD-ROM LTN-489S, 8QS4> SCSI0
5/cdrom removable
pciide1: channel 1 ignored (not responding; disabled or no drives?)
pcib0 at pci0 dev 20 function 3 "ATI IXP400 ISA" rev 0x00
ppb2 at pci0 dev 20 function 4 "ATI IXP400 PCI" rev 0x00
pci3 at ppb2 bus 3
pchb1 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb4 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
biomask e7ed netmask efed ttymask ffef
pctr: user-level cycle counter enabled
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
Automatic boot in progress: starting file system checks.
/dev/rwd0a: file system is clean; not checking
/dev/rwd0e: file system is clean; not checking
/dev/rwd0d: file system is clean; not checking
setting tty flags
starting network
starting system logger
starting rpc daemons:.
savecore: no core dump
checking quotas: done.
building ps databases: kvm dev.
clearing /tmp
starting pre-securelevel daemons:.
setting kernel security level: kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files
starting network daemons: sendmail inetd sshd.
starting local daemons:.
standard daemons: cron.
Tue Nov 1 07:42:37 PST 2005
More information about the freebsd-stable
mailing list