Dual Symbios/LSI-HBA and FreeBSD 6.0 RC1

[Juergen Dankoweit]

Hello,

on my Siemens Primergy 470 (dual PIII 450MHz) with two Symbios/LSI
83C895 I have great troubles: While booting FreeBSD it hangs on probing
the SCSI devices.
This error was in FreeBSD 5.3 STABLE 2, too! 

When will this bug being fixed?

Here the SCSI tree and dmesg from FBSD 5.3:
-------------------------------------------
primergy470# dmesg | grep sym
sym0: <895> port 0x3000-0x30ff mem
0xf0200000-0xf0200fff,0xf0201000-0xf02010ff irq 23 at device 1.0 on pci2
sym0: Symbios NVRAM, ID 7, Fast-40, LVD, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym1: <895> port 0x1800-0x18ff mem
0xf0101000-0xf0101fff,0xf0102000-0xf01020ff irq 17 at device 13.0 on
pci0
sym1: Symbios NVRAM, ID 7, Fast-40, SE, parity checking
sym1: open drain IRQ line driver, using on-chip SRAM
sym1: using LOAD/STORE-based firmware.
[^^^^^^^^^^^^^^^^^^^^^^^^^^ on FBSD 6.0RC1 it hangs here!]

(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
(noperiph:sym1:0:-1:-1): SCSI BUS reset delivered.
(noperiph:sym1:0:-1:-1): SCSI BUS mode change from SE to SE.
(probe7:sym0:0:8:0): phase change 6-7 6 at 0f76078c resid=4. 
ses0 at sym0 bus 0 target 8 lun 0
da0 at sym0 bus 0 target 0 lun 0
da1 at sym0 bus 0 target 10 lun 0
cd1 at sym1 bus 0 target 4 lun 0
cd0 at sym1 bus 0 target 5 lun 0

Many thanks for your answer.

Best regards

Juergen