5.4-RC3 crash report

[Doug White]

On Tue, 17 May 2005, Cedric Tabary wrote:

> On 17/05/2005 17:54, Cedric Tabary wrote:
> > FreeBSD 5.4-RC3 i386, no SMP compiled in kernel
> > dmesg atached
>
> Oops forgot the dmesg ;)

Panic & trap messages would be nice too, so we know what address is
exploded on.

>
> Copyright (c) 1992-2005 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> 	The Regents of the University of California. All rights reserved.
> FreeBSD 5.4-RC3 #1: Thu Apr 21 10:01:03 CEST 2005
>     root at xxxxxxxxxxxxxxxxxxx:/usr/obj/usr/src/sys/CED
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2793.01-MHz 686-class CPU)
>   Origin = "GenuineIntel"  Id = 0xf41  Stepping = 1
>   Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>   Hyperthreading: 2 logical CPUs
> real memory  = 1073479680 (1023 MB)
> avail memory = 1040789504 (992 MB)
> ACPI APIC Table: <DELL   PE BKC  >
> ioapic0: Changing APIC ID to 2
> ioapic1: Changing APIC ID to 3
> ioapic1: WARNING: intbase 32 != expected base 24
> ioapic2: Changing APIC ID to 4
> ioapic2: WARNING: intbase 64 != expected base 56
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> ioapic1 <Version 2.0> irqs 32-55 on motherboard
> ioapic2 <Version 2.0> irqs 64-87 on motherboard
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> acpi0: <DELL PE BKC> on motherboard
> acpi0: Power Button (fixed)
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
> cpu0: <ACPI CPU> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
> pci2: <ACPI PCI bus> on pcib2
> amr0: <LSILogic MegaRAID 1.51> mem 0xdfee0000-0xdfefffff,0xd80f0000-0xd80fffff irq 46 at device 14.0 on pci2
> amr0: <LSILogic PERC 4e/Si> Firmware 513O, BIOS H418, 256MB RAM
> pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1
> pci3: <ACPI PCI bus> on pcib3
> pcib4: <ACPI PCI-PCI bridge> at device 4.0 on pci0
> pci4: <ACPI PCI bus> on pcib4
> pcib5: <ACPI PCI-PCI bridge> at device 5.0 on pci0
> pci5: <ACPI PCI bus> on pcib5
> pcib6: <ACPI PCI-PCI bridge> at device 0.0 on pci5
> pci6: <ACPI PCI bus> on pcib6
> em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0xecc0-0xecff mem 0xdfbe0000-0xdfbfffff irq 64 at device 7.0 on pci6
> em0: Ethernet address: 00:11:43:36:39:e5
> em0:  Speed:N/A  Duplex:N/A
> pcib7: <ACPI PCI-PCI bridge> at device 0.2 on pci5
> pci7: <ACPI PCI bus> on pcib7
> em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0xdcc0-0xdcff mem 0xdf9e0000-0xdf9fffff irq 65 at device 8.0 on pci7
> em1: Ethernet address: 00:11:43:36:39:e6
> em1:  Speed:N/A  Duplex:N/A
> pcib8: <ACPI PCI-PCI bridge> at device 6.0 on pci0
> pci8: <ACPI PCI bus> on pcib8
> pcib9: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci9: <ACPI PCI bus> on pcib9
> pci9: <display, VGA> at device 13.0 (no driver attached)
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH5 UDMA100 controller> port 0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
> ata0: channel #0 on atapci0
> ata1: channel #1 on atapci0
> fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
> sio0: type 16550A
> orm0: <ISA Option ROMs> at iomem 0xec000-0xeffff,0xce800-0xcf7ff,0xcb000-0xcbfff,0xc0000-0xcafff on isa0
> pmtimer0 on isa0
> atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> ppc0: parallel port not found.
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> Timecounter "TSC" frequency 2793014175 Hz quality 800
> Timecounters tick every 1.000 msec
> IP Filter: v3.4.35 initialized.  Default = pass all, Logging = enabled
> acd0: CDROM <SAMSUNG CD-ROM SN-124/N104> at ata0-master PIO4
> amrd0: <LSILogic MegaRAID logical drive> on amr0
> amrd0: 69880MB (143114240 sectors) RAID 1 (optimal)
> ses0 at amr0 bus 0 target 6 lun 0
> ses0: <PE/PV 1x2 SCSI BP 1.0> Fixed Processor SCSI-2 device
> ses0: SAF-TE Compliant Device
> Mounting root from ufs:/dev/amrd0s1a
> em0: Link is up 100 Mbps Full Duplex
> em1: Link is up 100 Mbps Full Duplex
> _______________________________________________
> freebsd-stable at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org"
>

-- 
Doug White                    |  FreeBSD: The Power to Serve
dwhite at gumbysoft.com          |  www.FreeBSD.org