5.4-RC3: "giving up on 3 buffers";
"pfs_vncache_unload: 1 entries remaining"
Valentin Nechayev
netch at lucky.net
Sun May 1 02:54:53 PDT 2005
Sun, May 01, 2005 at 10:18:35, netch wrote about "5.4-RC3: "giving up on 3 buffers"":
> I have got system on 5.4-RC3 which stably fails to reboot correctly
> with the message in subject:
Next message after him:
pfs_vncache_unload: 1 entries remaining
After reboot:
WARNING: / was not properly dismounted
/var isn't unmounted also. Another partitions are explicitly unmounted
in /etc/rc.shutdown so this reduce harm of shutdown failures.
Disabling softupdates changes nothing.
Kernel config, boot dmesg and head of fs dump follows.
> After reboot, some file systems (/var and /var2) aren't correctly unmounted.
> I can debug it if someone helps in this (what to debug and what to print).
==={{{ nn154
machine i386
cpu I686_CPU
ident nn154
# To statically compile in device wiring instead of /boot/device.hints
#hints "GENERIC.hints" # Default places to look for devices.
options SCHED_4BSD # 4BSD scheduler
options INET # InterNETworking
options FFS # Berkeley Fast Filesystem
options SOFTUPDATES # Enable FFS soft updates support
options UFS_ACL # Support for access control lists
options UFS_DIRHASH # Improve performance on big directories
options NFSCLIENT # Network Filesystem Client
options NFSSERVER # Network Filesystem Server
options MSDOSFS # MSDOS Filesystem
options CD9660 # ISO 9660 Filesystem
options PROCFS # Process filesystem (requires PSEUDOFS)
options PSEUDOFS # Pseudo-filesystem framework
options GEOM_GPT # GUID Partition Tables.
options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!]
options COMPAT_FREEBSD4 # Compatible with FreeBSD4
options SCSI_DELAY=15000 # Delay (in ms) before probing SCSI
options KTRACE # ktrace(1) support
options SYSVSHM # SYSV-style shared memory
options SYSVMSG # SYSV-style message queues
options SYSVSEM # SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options ADAPTIVE_GIANT # Giant mutex is adaptive.
options MSGBUF_SIZE=131072
device apic # I/O APIC
# Bus support. Do not remove isa, even if you have no isa slots
device isa
device eisa
device pci
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
options ATA_STATIC_ID # Static device numbering
# SCSI peripherals
device scbus # SCSI bus (required for SCSI)
device da # Direct Access (disks)
device cd # CD
device pass # Passthrough device (direct SCSI access)
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse
device vga # VGA video card driver
device splash # Splash screen and screen saver support
# syscons is the default console driver, resembling an SCO console
device sc
device agp # support several AGP chipsets
# Floating point support - do not disable.
device npx
# Power management support (see NOTES for more options)
#device apm
# Add suspend/resume support for the i8254.
device pmtimer
# Serial (COM) ports
device sio # 8250, 16[45]50 based serial ports
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
device re # RealTek 8139C+/8169/8169S/8110S
device rl # RealTek 8129/8139
# Pseudo devices.
device loop # Network loopback
device mem # Memory and kernel memory devices
device io # I/O device
device random # Entropy device
device ether # Ethernet support
device sl # Kernel SLIP
device ppp # Kernel PPP
device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
device md # Memory "disks"
device gif # IPv6 and IPv4 tunneling
device faith # IPv6-to-IPv4 relaying (translation)
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device bpf # Berkeley packet filter
options CPU_ENABLE_SSE
options INCLUDE_CONFIG_FILE # Include this file in kernel
# altq(9). Enable the base part of the hooks with the ALTQ option.
# Individual disciplines must be built into the base system and can not be
# loaded as modules at this point. In order to build a SMP kernel you must
# also have the ALTQ_NOPCC option.
options ALTQ
options ALTQ_CBQ # Class Bases Queueing
options ALTQ_RED # Random Early Detection
options ALTQ_RIO # RED In/Out
options ALTQ_HFSC # Hierarchical Packet Scheduler
options ALTQ_CDNR # Traffic conditioner
options ALTQ_PRIQ # Priority Queueing
options ALTQ_DEBUG
# netgraph(4). Enable the base netgraph code with the NETGRAPH option.
# Individual node types can be enabled with the corresponding option
# listed below; however, this is not strictly necessary as netgraph
# will automatically load the corresponding KLD module if the node type
# is not already compiled into the kernel. Each type below has a
# corresponding man page, e.g., ng_async(8).
options NETGRAPH #netgraph(4) system
options IPFIREWALL #firewall
options IPFIREWALL_DEFAULT_TO_ACCEPT #allow everything by default
options IPFIREWALL_FORWARD #packet destination changes
options IPFIREWALL_FORWARD_EXTENDED #all packet dest changes
options IPDIVERT #divert sockets
options DUMMYNET
options UDF #Universal Disk Format
# Use real implementations of the aio_* system calls. There are numerous
# stability and security issues in the current aio code that make it
# unsuitable for inclusion on machines with untrusted local users.
options VFS_AIO
options LIBICONV
# Optional character code conversion support with LIBICONV.
# Each option requires their base file system and LIBICONV.
options CD9660_ICONV
options MSDOSFS_ICONV
options UDF_ICONV
===}}}
==={{{
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-RC3 #1: Sun Apr 24 00:33:47 EEST 2005
root at iv.nn.kiev.ua:/var2/usr/obj/5/var/REL5/src/sys/nn154
WARNING: debug.mpsafenet forced to 0 as aio requires Giant
WARNING: MPSAFE network stack disabled, expect reduced performance.
Preloaded elf kernel "/boot//kernel/kernel" at 0xc07aa000.
Calibrating clock(s) ... i8254 clock: 1193004 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 799434216 Hz
CPU: Intel Celeron (799.43-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 268435456 (256 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000825000 - 0x000000000fb37fff, 254881792 bytes (62227 pages)
avail memory = 257130496 (245 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fad00
bios32: Entry = 0xfb190 (c00fb190) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb1c0
pnpbios: Found PnP BIOS data at 0xc00fbbb0
pnpbios: Entry = f0000:bbe0 Rev = 1.0
Other BIOS signatures found:
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
mem: <memory>
Pentium Pro MTRR support enabled
io: <I/O>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=11308086)
pcibios: BIOS version 2.10
Found $PIR table, 10 entries at 0xc00fded0
PCI-Only Interrupts: 5 7 9 11
Location Bus Device Pin Link IRQs
slot 1 0 2 A 0x60 3 4 5 7 9 10 11 14 15
slot 1 0 2 B 0x61 3 4 5 7 9 10 11 14 15
slot 1 0 2 C 0x62 3 4 5 7 9 10 11 14 15
slot 1 0 2 D 0x63 3 4 5 7 9 10 11 14 15
slot 2 2 8 A 0x68 3 4 5 7 9 10 11 14 15
slot 2 2 8 B 0x69 3 4 5 7 9 10 11 14 15
slot 2 2 8 C 0x6a 3 4 5 7 9 10 11 14 15
slot 2 2 8 D 0x6b 3 4 5 7 9 10 11 14 15
slot 3 2 0 A 0x60 3 4 5 7 9 10 11 14 15
slot 3 2 0 B 0x61 3 4 5 7 9 10 11 14 15
slot 3 2 0 C 0x62 3 4 5 7 9 10 11 14 15
slot 3 2 0 D 0x63 3 4 5 7 9 10 11 14 15
slot 4 2 1 A 0x61 3 4 5 7 9 10 11 14 15
slot 4 2 1 B 0x62 3 4 5 7 9 10 11 14 15
slot 4 2 1 C 0x63 3 4 5 7 9 10 11 14 15
slot 4 2 1 D 0x60 3 4 5 7 9 10 11 14 15
slot 5 2 6 A 0x62 3 4 5 7 9 10 11 14 15
slot 5 2 6 B 0x63 3 4 5 7 9 10 11 14 15
slot 5 2 6 C 0x60 3 4 5 7 9 10 11 14 15
slot 5 2 6 D 0x61 3 4 5 7 9 10 11 14 15
slot 6 2 7 A 0x63 3 4 5 7 9 10 11 14 15
slot 6 2 7 B 0x60 3 4 5 7 9 10 11 14 15
slot 6 2 7 C 0x61 3 4 5 7 9 10 11 14 15
slot 6 2 7 D 0x62 3 4 5 7 9 10 11 14 15
slot 7 2 9 A 0x61 3 4 5 7 9 10 11 14 15
slot 7 2 9 B 0x62 3 4 5 7 9 10 11 14 15
slot 7 2 9 C 0x63 3 4 5 7 9 10 11 14 15
slot 7 2 9 D 0x60 3 4 5 7 9 10 11 14 15
slot 8 2 10 A 0x62 3 4 5 7 9 10 11 14 15
slot 8 2 10 B 0x63 3 4 5 7 9 10 11 14 15
slot 8 2 10 C 0x60 3 4 5 7 9 10 11 14 15
slot 8 2 10 D 0x61 3 4 5 7 9 10 11 14 15
embedded 0 31 A 0x60 3 4 5 7 9 10 11 14 15
embedded 0 31 B 0x61 3 4 5 7 9 10 11 14 15
embedded 0 31 C 0x6b 3 4 5 7 9 10 11 14 15
embedded 0 31 D 0x63 3 4 5 7 9 10 11 14 15
embedded 0 1 A 0x60 3 4 5 7 9 10 11 14 15
embedded 0 1 B 0x61 3 4 5 7 9 10 11 14 15
embedded 0 1 C 0x62 3 4 5 7 9 10 11 14 15
embedded 0 1 D 0x63 3 4 5 7 9 10 11 14 15
pcib0: <Intel 82815 (i815 GMCH) Host To Hub bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 10 Entries> on motherboard
$PIR: Links after initial probe:
Link IRQ Rtd Ref IRQs
0x60 255 N 9 3 4 5 7 9 10 11 14 15
0x61 255 N 9 3 4 5 7 9 10 11 14 15
0x62 255 N 8 3 4 5 7 9 10 11 14 15
0x63 255 N 9 3 4 5 7 9 10 11 14 15
0x68 255 N 1 3 4 5 7 9 10 11 14 15
0x69 255 N 1 3 4 5 7 9 10 11 14 15
0x6a 255 N 1 3 4 5 7 9 10 11 14 15
0x6b 255 N 2 3 4 5 7 9 10 11 14 15
$PIR: Found matching pin for 2.10.INTA at func 0: 11
$PIR: Found matching pin for 0.31.INTB at func 5: 7
$PIR: Found matching pin for 0.31.INTC at func 4: 9
$PIR: Found matching pin for 0.31.INTD at func 2: 11
$PIR: Links after initial IRQ discovery:
Link IRQ Rtd Ref IRQs
0x60 255 N 9 3 4 5 7 9 10 11 14 15
0x61 7 Y 9 3 4 5 7 9 10 11 14 15
0x62 11 Y 8 3 4 5 7 9 10 11 14 15
0x63 11 Y 9 3 4 5 7 9 10 11 14 15
0x68 255 N 1 3 4 5 7 9 10 11 14 15
0x69 255 N 1 3 4 5 7 9 10 11 14 15
0x6a 255 N 1 3 4 5 7 9 10 11 14 15
0x6b 9 Y 2 3 4 5 7 9 10 11 14 15
$PIR: IRQs used by BIOS: 7 9 11
$PIR: Interrupt Weights:
[ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ]
[ 0 0 0 0 0 0 0 9 0 2 0 17 0 0 0 0 ]
pci0: <PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base e4000000, size 26, enabled
found-> vendor=0x8086, dev=0x1130, revid=0x02
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x1131, revid=0x02
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0020, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x244e, revid=0x02
bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2440, revid=0x02
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000f000, size 4, enabled
found-> vendor=0x8086, dev=0x244b, revid=0x02
bus=0, slot=31, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000d000, size 5, enabled
$PIR: 0:31 INTD routed to irq 11
found-> vendor=0x8086, dev=0x2442, revid=0x02
bus=0, slot=31, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
map[20]: type 4, range 32, base 0000d400, size 5, enabled
$PIR: 0:31 INTC routed to irq 9
found-> vendor=0x8086, dev=0x2444, revid=0x02
bus=0, slot=31, func=4
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=9
map[10]: type 4, range 32, base 0000d800, size 8, enabled
map[14]: type 4, range 32, base 0000dc00, size 6, enabled
$PIR: 0:31 INTB routed to irq 7
found-> vendor=0x8086, dev=0x2445, revid=0x02
bus=0, slot=31, func=5
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=7
agp0: <Intel 82815 (i815 GMCH) host to PCI bridge> mem 0xe4000000-0xe7ffffff at device 0.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xe4000000
agp0: allocating GATT for aperture of size 36M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xec000000-0xedffffff
pcib1: prefetched decode 0xea000000-0xebffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 1, range 32, base ec000000, size 24, enabled
pcib1: device (null) requested decoded memory range 0xec000000-0xecffffff
map[14]: type 3, range 32, base ea000000, size 25, enabled
pcib1: device (null) requested decoded memory range 0xea000000-0xebffffff
$PIR: Found IRQ 5 for link 0x60 from 5 7 9 11
$PIR: ROUTE_INTERRUPT failed.
found-> vendor=0x10de, dev=0x002c, revid=0x15
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
intpin=a, irq=5
powerspec 1 supports D0 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xc000-0xcfff
pcib2: memory decode 0xee000000-0xee0fffff
pcib2: prefetched decode 0xfff00000-0xfffff
pcib2: Subtractively decoded bridge.
pci2: <PCI bus> on pcib2
pci2: physical bus=2
map[10]: type 4, range 32, base 0000c000, size 8, enabled
pcib2: device (null) requested decoded I/O range 0xc000-0xc0ff
map[14]: type 1, range 32, base ee000000, size 8, enabled
pcib2: device (null) requested decoded memory range 0xee000000-0xee0000ff
$PIR: 2:10 INTA routed to irq 11
found-> vendor=0x10ec, dev=0x8139, revid=0x10
bus=2, slot=10, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
rl0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xc000
pcib2: device re0 requested decoded I/O range 0xc000-0xc0ff
pcib2: device rl0 requested decoded I/O range 0xc000-0xc0ff
rl0: <RealTek 8139 10/100BaseTX> port 0xc000-0xc0ff mem 0xee000000-0xee0000ff irq 11 at device 10.0 on pci2
pcib2: device rl0 requested decoded I/O range 0xc000-0xc0ff
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: bpf attached
rl0: Ethernet address: 00:40:f4:65:6e:f8
rl0: [GIANT-LOCKED]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 UDMA100 controller> port 0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf000
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: reset tp2 stat0=50 stat1=00 devices=0x9<ATAPI_SLAVE,ATA_MASTER>
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1-master: stat=0x52 err=0x01 lsb=0x00 msb=0x00
ata1-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=52 stat1=00 devices=0x1<ATA_MASTER>
ata1: [MPSAFE]
pci0: <serial bus, USB> at device 31.2 (no driver attached)
pci0: <serial bus, USB> at device 31.4 (no driver attached)
pci0: <multimedia, audio> at device 31.5 (no driver attached)
pnpbios: 16 devices, largest 78 bytes
PNP0200: adding dma mask 0x10
PNP0200: adding io range 0-0xf, size=0x10, align=0
PNP0200: adding io range 0x81-0x83, size=0x3, align=0
PNP0200: adding io range 0x87-0x87, size=0x1, align=0
PNP0200: adding io range 0x89-0x8b, size=0x3, align=0
PNP0200: adding io range 0x8f-0x91, size=0x3, align=0
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0
pnpbios: handle 1 device ID PNP0200 (0002d041)
PNP0100: adding irq mask 0x1
PNP0100: adding io range 0x40-0x43, size=0x4, align=0
pnpbios: handle 2 device ID PNP0100 (0001d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0
pnpbios: handle 3 device ID PNP0b00 (000bd041)
PNP0303: adding irq mask 0x2
PNP0303: adding io range 0x60-0x60, size=0x1, align=0
PNP0303: adding io range 0x64-0x64, size=0x1, align=0
pnpbios: handle 4 device ID PNP0303 (0303d041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0
pnpbios: handle 5 device ID PNP0800 (0008d041)
PNP0c04: adding irq mask 0x2000
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0
pnpbios: handle 6 device ID PNP0c04 (040cd041)
INT0800: adding fixed memory32 range 0xffb80000-0xffbfffff, size=0x80000
pnpbios: handle 7 device ID INT0800 (0008d425)
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0xffb00000-0xffb7ffff, size=0x80000
PNP0c01: adding fixed memory32 range 0xfff00000-0xffffffff, size=0x100000
PNP0c01: adding fixed memory32 range 0xfee00000-0xfee0ffff, size=0x10000
PNP0c01: adding fixed memory32 range 0x100000-0xfffffff, size=0xff00000
pnpbios: handle 8 device ID PNP0c01 (010cd041)
PNP0c02: adding fixed memory32 range 0xf0000-0xf3fff, size=0x4000
PNP0c02: adding fixed memory32 range 0xf4000-0xf7fff, size=0x4000
PNP0c02: adding fixed memory32 range 0xf8000-0xfbfff, size=0x4000
PNP0c02: adding fixed memory32 range 0xfc000-0xfffff, size=0x4000
pnpbios: handle 9 device ID PNP0c02 (020cd041)
PNP0a03: adding io range 0x294-0x297, size=0x4, align=0
PNP0a03: adding io range 0x4d0-0x4d1, size=0x2, align=0
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0
PNP0a03: adding io range 0x480-0x48f, size=0x10, align=0
PNP0a03: adding io range 0x4000-0x40f7, size=0xf8, align=0
pnpbios: handle 10 device ID PNP0a03 (030ad041)
PNP0f13: adding irq mask 0x1000
pnpbios: handle 11 device ID PNP0f13 (130fd041)
PNP0501: adding irq mask 0x10
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0
pnpbios: handle 12 device ID PNP0501 (0105d041)
PNP0501: adding irq mask 0x8
PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0
pnpbios: handle 16 device ID PNP0501 (0105d041)
PNPb006: adding irq mask 0x400
PNPb006: adding io range 0x330-0x331, size=0x2, align=0
pnpbios: handle 17 device ID PNPb006 (06b0d041)
PNPb02f: adding io range 0x201-0x207, size=0x7, align=0
PNPb02f: adding io range 0x200-0x200, size=0x1, align=0
pnpbios: handle 18 device ID PNPb02f (2fb0d041)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0 failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
unknown: <PNP0800> failed to probe at port 0x61 on isa0
unknown: <INT0800> failed to probe at iomem 0xffb80000-0xffbfffff on isa0
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0f13> at irq 12 on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x2f8-0x2ff on isa0
unknown: <PNPb006> failed to probe at port 0x330-0x331 irq 10 on isa0
unknown: <PNPb02f> failed to probe at port 0x200,0x201-0x207 on isa0
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 799434216 Hz quality 800
Timecounters tick every 10.000 msec
DUMMYNET initialized (011031)
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to accept, logging disabled
lo0: bpf attached
ata0-slave: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata0-master: pio=0x0c wdma=0x22 udma=0x46 cable=40pin
ata0-master: setting PIO4 on Intel ICH2 chip
ata0-master: setting UDMA100 on Intel ICH2 chip
ata0-slave: setting PIO4 on Intel ICH2 chip
ata0-slave: setting UDMA33 on Intel ICH2 chip
ad0: <SAMSUNG SP1203N/TL100-23> ATA-7 disk at ata0-master
ad0: 114498MB (234493056 sectors), 232632 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
GEOM: new disk ad0
[0] f:80 typ:6 s(CHS):0/1/1 e(CHS):186/254/63 s:63 l:3004092
[1] f:00 typ:15 s(CHS):577/0/1 e(CHS):1023/254/63 s:9269505 l:225215235
[2] f:00 typ:165 s(CHS):187/0/1 e(CHS):257/254/63 s:3004155 l:1140615
[3] f:00 typ:165 s(CHS):258/0/1 e(CHS):576/254/63 s:4144770 l:5124735
GEOM: Configure ad0s1, start 32256 length 1538095104 end 1538127359
GEOM: Configure ad0s2, start 4745986560 length 115310200320 end 120056186879
GEOM: Configure ad0s3, start 1538127360 length 583994880 end 2122122239
GEOM: Configure ad0s4, start 2122122240 length 2623864320 end 4745986559
[0] f:61 typ:116 s(CHS):288/110/36 e(CHS):366/104/37 s:1701998624 l:1629516659
[1] f:6e typ:101 s(CHS):107/121/32 e(CHS):10/121/13 s:1330184192 l:538976288
[2] f:20 typ:83 s(CHS):345/32/19 e(CHS):324/77/19 s:538989391 l:1398362912
[3] f:7f typ:187 s(CHS):65/1/0 e(CHS):96/0/7 s:-385848730 l:65339
acd0: <CD-540E/1.0A> CDROM drive at ata0 as slave
acd0: read 6890KB/s (6890KB/s), 128KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata1-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata1-master: setting PIO4 on Intel ICH2 chip
ata1-master: setting UDMA100 on Intel ICH2 chip
ad2: <IC35L040AVER07-0/ER4OA44A> ATA-5 disk at ata1-master
ad2: 39266MB (80418240 sectors), 79780 C, 16 H, 63 S, 512 B
ad2: 16 secs/int, 1 depth queue, UDMA100
MBREXT Slice 5 on ad0s2:
[0] f:00 typ:165 s(CHS):577/1/1 e(CHS):1023/254/63 s:63 l:15888222
[1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:15888285 l:2040255
GEOM: Configure ad0s5, start 32256 length 8134769664 end 8134801919
MBREXT Slice 6 on ad0s2:
[0] f:00 typ:131 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:2040192
[1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:17928540 l:514080
GEOM: Configure ad0s6, start 8134834176 length 1044578304 end 9179412479
MBREXT Slice 7 on ad0s2:
[0] f:00 typ:130 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:514017
[1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:18442620 l:16065
GEOM: Configure ad0s7, start 9179444736 length 263176704 end 9442621439
MBREXT Slice 8 on ad0s2:
[0] f:00 typ:3 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:16002
[1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:18458685 l:1654695
GEOM: Configure ad0s8, start 9442653696 length 8193024 end 9450846719
MBREXT Slice 9 on ad0s2:
[0] f:00 typ:3 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:1654632
[1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:20113380 l:642600
GEOM: Configure ad0s9, start 9450878976 length 847171584 end 10298050559
MBREXT Slice 10 on ad0s2:
[0] f:00 typ:131 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:642537
[1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:20755980 l:31985415
GEOM: Configure ad0s10, start 10298082816 length 328978944 end 10627061759
MBREXT Slice 11 on ad0s2:
[0] f:00 typ:165 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:31985352
[1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:52741395 l:1975995
GEOM: Configure ad0s11, start 10627094016 length 16376500224 end 27003594239
MBREXT Slice 12 on ad0s2:
[0] f:00 typ:165 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:1975932
[1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:151364367 l:73850868
GEOM: Configure ad0s12, start 27003626496 length 1011677184 end 28015303679
MBREXT Slice 13 on ad0s2:
[0] f:00 typ:165 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:73850805
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s13, start 77498588160 length 37811612160 end 115310200319
[0] f:00 typ:165 s(CHS):577/1/1 e(CHS):1023/254/63 s:63 l:15888222
[1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:15888285 l:2040255
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s2s1, start 32256 length 8134769664 end 8134801919
GEOM: Configure ad0s2s2, start 8134801920 length 1044610560 end 9179412479
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
GEOM: Configure ad0s3a, start 0 length 583994880 end 583994879
GEOM: Configure ad0s3c, start 0 length 583994880 end 583994879
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
GEOM: Configure ad0s4a, start 0 length 524288000 end 524287999
GEOM: Configure ad0s4c, start 0 length 2623864320 end 2623864319
GEOM: Configure ad0s4e, start 524288000 length 2097152000 end 2621439999
GEOM: new disk ad2
WARNING: Expected rawoffset 9269505, found 9269568
GEOM: Configure ad0s5b, start 8192 length 524288000 end 524296191
GEOM: Configure ad0s5c, start 0 length 8134769664 end 8134769663
GEOM: Configure ad0s5e, start 524296192 length 7603321344 end 8127617535
WARNING: Expected rawoffset 9269505, found 30025548
GEOM: Configure ad0s11b, start 8192 length 524279808 end 524287999
GEOM: Configure ad0s11c, start 0 length 16376500224 end 16376500223
GEOM: Configure ad0s11e, start 524288000 length 15852212224 end 16376500223
WARNING: Expected rawoffset 9269505, found 62010963
GEOM: Configure ad0s12c, start 0 length 1011677184 end 1011677183
WARNING: Expected rawoffset 9269505, found 160633935
GEOM: Configure ad0s13c, start 0 length 37811612160 end 37811612159
GEOM: Configure ad0s13e, start 0 length 37811612160 end 37811612159
WARNING: Expected rawoffset 63, found 9269568
GEOM: Configure ad0s2s1b, start 8192 length 524288000 end 524296191
GEOM: Configure ad0s2s1c, start 0 length 8134769664 end 8134769663
GEOM: Configure ad0s2s1e, start 524296192 length 7603321344 end 8127617535
MBREXT Slice 5 on ad0s2s2:
[0] f:00 typ:131 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:2040192
[1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:17928540 l:514080
GEOM: Configure ad0s2s5, start 32256 length 1044578304 end 1044610559
[0] f:00 typ:131 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:2040192
[1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:17928540 l:514080
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s2s2s1, start 32256 length 1044578304 end 1044610559
GEOM: Configure ad0s2s2s2, start 9179412480 length 263208960 end 9442621439
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
[0] f:00 typ:2 s(CHS):0/1/1 e(CHS):255/254/63 s:63 l:4112577
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:15 s(CHS):974/0/1 e(CHS):1023/254/63 s:15647310 l:64758015
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad2s1, start 32256 length 2105639424 end 2105671679
GEOM: Configure ad2s3, start 8011422720 length 33156103680 end 41167526399
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
MBREXT Slice 5 on ad2s3:
[0] f:00 typ:131 s(CHS):974/1/1 e(CHS):1013/254/63 s:63 l:642537
[1] f:00 typ:5 s(CHS):1014/0/1 e(CHS):1017/254/63 s:642600 l:64260
GEOM: Configure ad2s5, start 32256 length 328978944 end 329011199
MBREXT Slice 6 on ad2s3:
[0] f:00 typ:131 s(CHS):1014/1/1 e(CHS):1017/254/63 s:63 l:64197
[1] f:00 typ:5 s(CHS):1018/0/1 e(CHS):1023/254/63 s:706860 l:16386300
GEOM: Configure ad2s6, start 329043456 length 32868864 end 361912319
MBREXT Slice 7 on ad2s3:
[0] f:00 typ:3 s(CHS):1018/1/1 e(CHS):1023/254/63 s:63 l:16386237
[1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:17093160 l:16386300
GEOM: Configure ad2s7, start 361944576 length 8389753344 end 8751697919
MBREXT Slice 8 on ad2s3:
[0] f:00 typ:12 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:16386237
[1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:33479460 l:1044225
GEOM: Configure ad2s8, start 8751730176 length 8389753344 end 17141483519
MBREXT Slice 9 on ad2s3:
[0] f:00 typ:130 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:1044162
[1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:34523685 l:2040255
GEOM: Configure ad2s9, start 17141515776 length 534610944 end 17676126719
MBREXT Slice 10 on ad2s3:
[0] f:00 typ:131 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:2040192
[1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:36563940 l:10297665
GEOM: Configure ad2s10, start 17676158976 length 1044578304 end 18720737279
MBREXT Slice 11 on ad2s3:
[0] f:00 typ:12 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:10297602
[1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:46861605 l:17896410
GEOM: Configure ad2s11, start 18720769536 length 5272372224 end 23993141759
MBREXT Slice 12 on ad2s3:
[0] f:00 typ:12 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:17896347
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad2s12, start 23993174016 length 9162929664 end 33156103679
[0] f:00 typ:131 s(CHS):974/1/1 e(CHS):1013/254/63 s:63 l:642537
[1] f:00 typ:5 s(CHS):1014/0/1 e(CHS):1017/254/63 s:642600 l:64260
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad2s3s1, start 32256 length 328978944 end 329011199
GEOM: Configure ad2s3s2, start 329011200 length 32901120 end 361912319
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
MBREXT Slice 5 on ad2s3s2:
[0] f:00 typ:131 s(CHS):1014/1/1 e(CHS):1017/254/63 s:63 l:64197
[1] f:00 typ:5 s(CHS):1018/0/1 e(CHS):1023/254/63 s:706860 l:16386300
GEOM: Configure ad2s3s5, start 32256 length 32868864 end 32901119
[0] f:00 typ:131 s(CHS):1014/1/1 e(CHS):1017/254/63 s:63 l:64197
[1] f:00 typ:5 s(CHS):1018/0/1 e(CHS):1023/254/63 s:706860 l:16386300
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad2s3s2s1, start 32256 length 32868864 end 32901119
GEOM: Configure ad2s3s2s2, start 361912320 length 8389785600 end 8751697919
Mounting root from ufs:/dev/ad0s3a
WARNING: / was not properly dismounted
start_init: trying /sbin/init
/var3: correcting fs_sblockloc from 65536 to 8192
===}}}
==={{{
magic 11954 (UFS1) time Sun May 1 12:49:57 2005
id [ 3c4af93b 4c774041 ]
ncg 4 size 285153 blocks 280664
bsize 16384 shift 14 mask 0xffffc000
fsize 2048 shift 11 mask 0xfffff800
frag 8 shift 3 fsbtodb 2
minfree 8% optim time symlinklen 60
maxbpg 4096 maxcontig 7 contigsumsize 7
nbfree 19731 ndir 436 nifree 62068 nffree 5130
cpg 92 bpg 11776 fpg 94208 ipg 17664
nindir 4096 inopb 128 nspf 4 maxfilesize 1126174852055039
sbsize 2048 cgsize 16384 cgoffset 1024 cgmask 0xffffffff
csaddr 1128 cssize 2048
rotdelay 0ms rps 60 trackskew 0 interleave 1
nsect 4096 npsect 4096 spc 4096
sblkno 8 cblkno 16 iblkno 24 dblkno 1128
cgrotor 0 fmod 0 ronly 0 clean 0
avgfpdir 64 avgfilesize 16384
flags none
fsmnt /
volname swuid 0
cs[].cs_(nbfree,ndir,nifree,nffree):
(8437,81,16845,430) (3480,270,12833,2909) (7814,42,15550,1791) (0,43,16840,0)
cylinders in last group 3
blocks in last group 316
cg 0:
magic 90255 tell 8000 time Sun May 1 12:49:56 2005
===}}}
-netch-
More information about the freebsd-stable
mailing list