Proliant 380 G4

Babak Farrokhi bfarrokhi at gmail.com
Wed Jun 15 18:55:44 GMT 2005


The 6i controller support is included in 4.11, so if you want to go
with 4.x family, 4.11 is your best bet. I am also running 5.3 and 5.4
on G4s without any problem.

-- Babak Farrokhi

On 6/15/05, Philippe PEGON <Philippe.Pegon at crc.u-strasbg.fr> wrote:
> Palle Girgensohn a écrit :
> > Hi!
> >
> > Just a quick check - a client is getting a Proliant 380 G4 with a "6i"
> > Raid controller. Haven't used this hardware before. Will it work fine
> > with FreeBSD? Which version will work best, 5.4 or 4.11? Any
> > peculiarities or things to think about?
> >
> > Any input appreciated!
> 
> we have 3 Proliant 380 G4 and hardware works fine. For your information, I attach a dmesg of one of
> them. I've just another problem, but I don't think that it comes from hardware :
> 
> http://lists.freebsd.org/pipermail/freebsd-stable/2005-June/015952.html
> 
> >
> > Thanks
> > Palle
> 
> --
> Philippe PEGON
> 
> 
> Copyright (c) 1992-2005 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>         The Regents of the University of California. All rights reserved.
> FreeBSD 5.4-STABLE #3: Thu May 19 20:35:36 CEST 2005
>     root at crc.u-strasbg.fr:/usr/obj/usr/src/sys/NS1A
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Xeon(TM) CPU 3.60GHz (3600.15-MHz 686-class CPU)
>   Origin = "GenuineIntel"  Id = 0xf41  Stepping = 1
>   Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>   Hyperthreading: 2 logical CPUs
> real memory  = 2147430400 (2047 MB)
> avail memory = 2095968256 (1998 MB)
> ACPI APIC Table: <HP     00000083>
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
>  cpu0 (BSP): APIC ID:  0
>  cpu1 (AP): APIC ID:  6
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> ioapic1 <Version 2.0> irqs 24-47 on motherboard
> ioapic2 <Version 2.0> irqs 48-71 on motherboard
> ioapic3 <Version 2.0> irqs 72-95 on motherboard
> ioapic4 <Version 2.0> irqs 96-119 on motherboard
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> acpi0: <HP P51> on motherboard
> acpi0: Power Button (fixed)
> Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0
> cpu0: <ACPI CPU> on acpi0
> cpu1: <ACPI CPU> on acpi0
> pcib0: <ACPI Host-PCI bridge> on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
> pci2: <ACPI PCI bus> on pcib1
> pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci2
> pci3: <ACPI PCI bus> on pcib2
> bge0: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2100> mem 0xfdef0000-0xfdefffff irq 25 at device 1.0 on pci3
> miibus0: <MII bus> on bge0
> brgphy0: <BCM5704 10/100/1000baseTX PHY> on miibus0
> brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
> bge0: Ethernet address: 00:12:79:d8:a0:37
> bge1: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2100> mem 0xfdee0000-0xfdeeffff irq 26 at device 1.1 on pci3
> miibus1: <MII bus> on bge1
> brgphy1: <BCM5704 10/100/1000baseTX PHY> on miibus1
> brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
> bge1: Ethernet address: 00:12:79:d8:a0:36
> pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci2
> pci4: <ACPI PCI bus> on pcib3
> ciss0: <HP Smart Array 6i> port 0x4000-0x40ff mem 0xfdf80000-0xfdfbffff,0xfdff0000-0xfdff1fff irq 51 at device 3.0 on pci4
> pcib4: <ACPI PCI-PCI bridge> at device 6.0 on pci0
> pci5: <ACPI PCI bus> on pcib4
> pcib5: <ACPI PCI-PCI bridge> at device 0.0 on pci5
> pci6: <ACPI PCI bus> on pcib5
> pcib6: <ACPI PCI-PCI bridge> at device 0.2 on pci5
> pci10: <ACPI PCI bus> on pcib6
> uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0x2000-0x201f irq 16 at device 29.0 on pci0
> usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0x2020-0x203f irq 19 at device 29.1 on pci0
> usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
> usb1: USB revision 1.0
> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0x2040-0x205f irq 18 at device 29.2 on pci0
> usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
> usb2: USB revision 1.0
> uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0x2060-0x207f irq 16 at device 29.3 on pci0
> usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
> usb3: USB revision 1.0
> uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub3: 2 ports with 2 removable, self powered
> pci0: <serial bus, USB> at device 29.7 (no driver attached)
> pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci1: <ACPI PCI bus> on pcib7
> pci1: <display, VGA> at device 3.0 (no driver attached)
> pci1: <base peripheral> at device 4.0 (no driver attached)
> pci1: <base peripheral> at device 4.2 (no driver attached)
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH5 UDMA100 controller> port 0x500-0x50f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
> ata0: channel #0 on atapci0
> ata1: channel #1 on atapci0
> acpi_tz0: <Thermal Zone> on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: model IntelliMouse Explorer, device ID 4
> sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
> sio0: type 16550A
> fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f5 irq 6 drq 2 on acpi0
> fdc0: does not respond
> device_attach: fdc0 attach returned 6
> fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f5 irq 6 drq 2 on acpi0
> fdc0: does not respond
> device_attach: fdc0 attach returned 6
> orm0: <ISA Option ROMs> at iomem 0xee000-0xeffff,0xc8000-0xcbfff,0xc0000-0xc7fff on isa0
> pmtimer0 on isa0
> ppc0: parallel port not found.
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio1 at port 0x2f8-0x2ff irq 3 on isa0
> sio1: type 16550A
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> Timecounters tick every 1.000 msec
> acd0: CDROM <COMPAQ CD-ROM SN-124/N104> at ata0-master PIO4
> da0 at ciss0 bus 0 target 0 lun 0
> da0: <COMPAQ RAID 1  VOLUME OK> Fixed Direct Access SCSI-0 device
> da0: 135.168MB/s transfers
> da0: 34727MB (71122560 512 byte sectors: 255H 32S/T 8716C)
> da1 at ciss0 bus 0 target 1 lun 0
> da1: <COMPAQ RAID 5  VOLUME OK> Fixed Direct Access SCSI-0 device
> da1: 135.168MB/s transfers
> da1: 69455MB (142245120 512 byte sectors: 255H 32S/T 17432C)
> SMP: AP CPU #1 Launched!
> Mounting root from ufs:/dev/da0s1a
> 
> 
> _______________________________________________
> freebsd-stable at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org"
> 
> 


--


More information about the freebsd-stable mailing list