recompile, harddrive(partition) error
Damian-Fekete Andrei
andreidf at yahoo.com
Wed Feb 9 05:19:02 PST 2005
Hello,
My first day with a BSD system so.. be gentle please.
:)
I've installed FreeBSD 5.3, which i've downloaded from
net a few days ago. I've recompiled my kernel to make
my world spin. I've copied stable-supfile from
/usr/share/examples/cvsup to /root/ and did a cvsup
for that file. I've than tried to compile the kernel
after editing GENERIC (==KERNEL) in
/usr/src/sys/i386/conf if i remember correct. I've got
some unexpected error about a "unwind.h" missing file;
i think something is broke with this "stable" thing.
Take a look at files in
/usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++/,
for example unwind-cxx.h which includes "unwind.h" not
<unwind.h>; but there is no such file in that
directory. Also there are some references to
"bits/???.h" but also no directory "bits" there. I've
got the files from /usr/src/contrib/... but don't
really remember the exact path. So I've managed to
make buildkernel KERNCONF=GENERIC, make installkernel
KERNCONF=GENERIC.
One more thing: before copying that unwind.h, bits/..
files and make buildworkd I've upgraded compiler from
3.3 to 3.4 to see if it works, but it didn't.
Some places on the web stated that the problem could
be from optimization. I had CXXFLAGS=-O2 -pipe
-funrool-loops but i've commented that line in
make.conf.
I don't know if I've missed a step or something, but
if I did, please let me know.
Finally, make buildkernel KERNCONF.. , make
installkernel KERNCONF.. worked. After reboot
surprise, surprise.
I'll paste all the log I've got through "boot -v" (a
few lines on top missing, hope that is not a real
problem):
----------------------------------
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00,
addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f
irq 5 at device 7.3 on pc0uhci1: Reserved 0x20 bytes
for rid 0x20 type 4 at 0xd800
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00,
addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 7.4 (no driver
attached)
pcm0: <VIA VT82C686A> port
0xe400-0xe403,0xe000-0xe003,0xdc00-0xdcff irq 11 at
0pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at
0xdc00
pcm0: [GIANT-LOCKED]
pcm0: <ICEnsemble ICE1232 AC97 Codec (id =
0x49434511)>
pcm0: Codec features headphone, 18 bit DAC, 18 bit
ADC, 5 bit master volume, Re7pcm0: Primary codec
extended features variable rate PCM, AMAP
pcm0: sndbuf_setmap 19a000, 1000; 0xc1066000 -> 19a000
pcm0: sndbuf_setmap 1dd000, 1000; 0xc1069000 -> 1dd000
rl0: Reserved 0x100 bytes for rid 0x10 type 4 at
0xe800
rl0: <RealTek 8139 10/100BaseTX> port 0xe800-0xe8ff
mem 0xe7000000-0xe70000ff i0miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX,
100baseTX-FDX, auto
rl0: bpf attached
rl0: Ethernet address: 00:40:f4:83:5a:2a
rl0: [MPSAFE]
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5
irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff
irq 4 flags 0x10 on acpi0
sio0: type 16550A, console
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff
irq 3 on acpi0
sio1: type 16550A
unknown: not probed (disabled)
ppc0: using extended I/O port range
ppc0: EPP SPP
ppc0: <Standard parallel printer port> port
0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
unknown: not probed (disabled)
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60
irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0,
flags:0x1d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0047
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 00 00 64
psm: status 00 03 64
psm: status 00 03 64
psm: data 08 00 00
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sc: sc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
vga: vga0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcbfff on
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, kbd0, terminal emulator: sc (syscons
terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0
size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on
isa0
pcic1: not probed (disabled)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
Timecounter "TSC" frequency 1329066934 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 2 steps (100% to 50.0%),
currently 100.0%
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: setting PIO4 on VIA 82C686B chip
ata0-master: setting UDMA100 on VIA 82C686B chip
ad0: <ST340810A/3.39> ATA-6 disk at ata0-master
ad0: 38166MB (78165360 sectors), 77545 C, 16 H, 63 S,
512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata1-master: setting PIO4 on VIA 82C686B chip
ata1-master: setting UDMA33 on VIA 82C686B chip
acd0: <ASUS CRW-5232AS/1.0> CDRW drive at ata1 as
master
acd0: read 8958KB/s (8958KB/s) write 8958KB/s
(8958KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes: CDR, CDRW, test write, burnproof
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
GEOM: new disk ad0
[0] f:00 typ:131 s(CHS):0/1/1 e(CHS):254/254/63 s:63
l:4096512
[1] f:00 typ:131 s(CHS):255/0/1 e(CHS):1023/254/63
s:4096575 l:18362295
[2] f:00 typ:15 s(CHS):1023/255/63 e(CHS):1023/254/63
s:22458870 l:30137940
[3] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63
s:52596810 l:25559415
GEOM: Configure ad0s1, start 32256 length 2097414144
end 2097446399
GEOM: Configure ad0s2, start 2097446400 length
9401495040 end 11498941439
GEOM: Configure ad0s3, start 11498941440 length
15430625280 end 26929566719
GEOM: Configure ad0s4, start 26929566720 length
13086420480 end 40015987199
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:5 s(CHS):261/0/1 e(CHS):292/254/63 s:0
l:514080
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s2s2, start 0 length 263208960 end
263208959
MBREXT Slice 5 on ad0s3:
[0] f:00 typ:130 s(CHS):1023/254/63 e(CHS):1023/254/63
s:63 l:417627
[1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63
s:417690 l:4160835
GEOM: Configure ad0s5, start 32256 length 213825024
end 213857279
MBREXT Slice 6 on ad0s3:
[0] f:00 typ:131 s(CHS):1023/254/63 e(CHS):1023/254/63
s:63 l:4160772
[1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63
s:4578525 l:25559415
GEOM: Configure ad0s6, start 213889536 length
2130315264 end 2344204799
MBREXT Slice 7 on ad0s3:
[0] f:00 typ:131 s(CHS):1023/254/63 e(CHS):1023/254/63
s:63 l:25559352
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s7, start 2344237056 length
13086388224 end 15430625279
[0] f:00 typ:130 s(CHS):1023/254/63 e(CHS):1023/254/63
s:63 l:417627
[1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63
s:417690 l:4160835
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s3s1, start 32256 length 213825024
end 213857279
GEOM: Configure ad0s3s2, start 213857280 length
2130347520 end 2344204799
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0
l:50000
GEOM: Configure ad0s4a, start 0 length 268435456 end
268435455
GEOM: Configure ad0s4b, start 268435456 length
359464960 end 627900415
GEOM: Configure ad0s4c, start 0 length 13086420480 end
13086420479
GEOM: Configure ad0s4d, start 627900416 length
268435456 end 896335871
GEOM: Configure ad0s4e, start 896335872 length
268435456 end 1164771327
GEOM: Configure ad0s4f, start 1164771328 length
11921649152 end 13086420479
MBREXT Slice 5 on ad0s2s2:
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:5 s(CHS):261/0/1 e(CHS):292/254/63 s:0
l:514080
MBREXT Slice 5 on ad0s2s2:
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:5 s(CHS):261/0/1 e(CHS):292/254/63 s:0
l:514080
MBREXT Slice 5 on ad0s2s2:
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:5 s(CHS):261/0/1 e(CHS):292/254/63 s:0
l:514080
MBREXT Slice 5 on ad0s2s2:
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:5 s(CHS):261/0/1 e(CHS):292/254/63 s:0
l:514080
MBREXT Slice 5 on ad0s2s2:
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:5 s(CHS):261/0/1 e(CHS):292/254/63 s:0
l:514080
[...]
...and on, and on.
I am in linux now so i'll print some information about
my harddisk:
----------------
Disk /dev/hda: 40.0 GB, 40020664320 bytes
255 heads, 63 sectors/track, 4865 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id
System
/dev/hda1 1 255 2048256 83
Linux
/dev/hda2 256 1398 9181147+ 83
Linux
/dev/hda3 1399 3274 15068970 f
W95 Ext'd (LBA)
/dev/hda4 * 3275 4865 12779707+ a5
FreeBSD
/dev/hda5 1399 1424 208813+ 82
Linux swap / Solaris
/dev/hda6 1425 1683 2080386 83
Linux
/dev/hda7 1684 3274 12779676 83
Linux
-----------------------
(/dev/hda3 holds hda5,hda6,hda7)
WOW!! You are here! I really appreciate any help;
being just a few days in FreeBSD and getting this kind
of problems doesn't make me feel too good.
Also, if you think no one is going to help me fix my
problem here please give me some directions of where
to go. People tend not to like this long messages and
usually avoid them.
Best regards,
andrei
__________________________________
Do you Yahoo!?
Yahoo! Mail - You care about security. So do we.
http://promotions.yahoo.com/new_mail
More information about the freebsd-stable
mailing list