ad10: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=11441599

[Randy Bush]

> As I said I need reports on 6.0, the ATA driver as is in 5.4 is not  
> supported by me unless you use the ATA mkIII patches..

you know, we just upgraded a system from 4.11 to 7.0 and see problems.
we have been chasing cables, and never considered that we could blame
all our problems on you and demand service!  :-)

ad2: WARNING - WRITE_DMA UDMA ICRC error (retrying request) LBA=729217
ad2: WARNING - WRITE_DMA UDMA ICRC error (retrying request) LBA=729217
ad2: FAILURE - WRITE_DMA status=51<READY,DSC,ERROR> error=84<ICRC,ABORTED> LBA=7
ad2: WARNING - WRITE_DMA UDMA ICRC error (retrying request) LBA=729222
ad2: WARNING - WRITE_DMA UDMA ICRC error (retrying request) LBA=729222
ad2: FAILURE - WRITE_DMA status=51<READY,DSC,ERROR> error=84<ICRC,ABORTED> LBA=2

atapci0: <Promise PDC20269 UDMA133 controller> port 0x5020-0x5027,0x5014-0x50175
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
pci4: <base peripheral, interrupt controller> at device 30.0 (no driver attache)
pcib6: <ACPI PCI-PCI bridge> at device 31.0 on pci4
pci6: <ACPI PCI bus> on pcib6
atapci1: <Promise PDC20269 UDMA133 controller> port 0x6020-0x6027,0x6014-0x60176
ata4: <ATA channel 0> on atapci1
ata5: <ATA channel 1> on atapci1
pci0: <serial bus, USB> at device 29.0 (no driver attached)
pci0: <serial bus, USB> at device 29.1 (no driver attached)
pci0: <serial bus, USB> at device 29.2 (no driver attached)
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci7: <ACPI PCI bus> on pcib7
pci7: <display, VGA> at device 1.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci2: <Intel ICH3 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x30
ata0: <ATA channel 0> on atapci2
ata1: <ATA channel 1> on atapci2

hmmmm

i demand a full refund!!!!

randy, still chasing cables