ad10: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=11441599

[Mike Tancsa]

At 10:46 PM 09/08/2005, Matthias Buelow wrote:
>Karl Denninger wrote:
>
> >SII chipsets were ok in 4.x, but the newer ATA code broke badly with them.
> >I've had a PR open on this since February, and many others have reported
> >similar issues.  The problems still exist in the 6.x-BETA releases I've
> >checked out, and are in some cases MORE severe (for me anyway) than they are
> >in 5.4.
>
>Well, it doesn't affect just the SII chips.. I see the same on an
>Intel ICH6 chipset but never after the kernel has mounted the root
>fs. Sometimes it takes several attempts until it manages to do so,
>though. The machine works w/o any such problems on other OSes. I've

I have ICH6 boxes and they run just fine without issue.  Have you checked 
to see if it actually has bad sectors or is a problem with your tray (if 
you use one)

[verify1]% dmesg | grep -i ich
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 
0xe000-0xe01f at device 29.0 on pci0
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 
0xe100-0xe11f at device 29.1 on pci0
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 
0xe200-0xe21f at device 29.2 on pci0
usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 
0xe300-0xe31f at device 29.3 on pci0
usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
fxp0: <Intel 82562EZ (ICH6)> port 0xd000-0xd03f mem 0xd0000000-0xd0000fff 
irq 10 at device 8.0 on pci1
atapci0: <Intel ICH6 SATA150 controller> port 
0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.2 on pci0
[verify1]%

Master:  ad0 <ST3120026AS/3.18> Serial ATA v1.0

         ---Mike