kernel: swap_pager: indefinite wait buffer - on 5.3-RELEASE-p5
Zoltan Frombach
tssajo at hotmail.com
Fri Apr 29 14:02:38 PDT 2005
Mike,
Thank you so much for the information you have provided. I installed
smartmontools from ports, what a great tool!
However, I see 0 (zero) Reallocated_Sector_Ct ... So the hard drive seems to
be okay? I attach the full output below. Is there someone knowledgeable
about HD Smart information, who can possible tell me if this drive looks
like if it is failing?
# smartctl -a ad0
smartctl version 5.32 Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: Maxtor 6Y080L0
Serial Number: Y3H1TJKE
Firmware Version: YAR41VW0
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0
Local Time is: Fri Apr 29 13:52:56 2005 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
The SMART RETURN STATUS return value (smartmontools -H option/Directive)
can not be retrieved with this version of ATAng, please do not rely on this
value
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection:
Enabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test has
ever
been run.
Total time to complete Offline
data collection: ( 242) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 36) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
3 Spin_Up_Time 0x0027 203 203 063 Pre-fail
s - 12682
4 Start_Stop_Count 0x0032 253 253 000 Old_age
ys - 61
5 Reallocated_Sector_Ct 0x0033 253 253 063 Pre-fail
s - 0
6 Read_Channel_Margin 0x0001 253 253 100 Pre-fail
ine - 0
7 Seek_Error_Rate 0x000a 253 252 000 Old_age
ys - 0
8 Seek_Time_Performance 0x0027 253 248 187 Pre-fail
s - 36017
9 Power_On_Minutes 0x0032 219 219 000 Old_age
ys - 1023h+58m
10 Spin_Retry_Count 0x002b 253 252 157 Pre-fail
s - 0
11 Calibration_Retry_Count 0x002b 253 252 223 Pre-fail
s - 0
12 Power_Cycle_Count 0x0032 253 253 000 Old_age
ys - 177
192 Power-Off_Retract_Count 0x0032 253 253 000 Old_age
ys - 0
193 Load_Cycle_Count 0x0032 253 253 000 Old_age
ys - 0
194 Temperature_Celsius 0x0032 253 253 000 Old_age
ys - 31
195 Hardware_ECC_Recovered 0x000a 253 252 000 Old_age
ys - 2976
196 Reallocated_Event_Count 0x0008 253 253 000 Old_age
line - 0
197 Current_Pending_Sector 0x0008 253 253 000 Old_age
line - 0
198 Offline_Uncorrectable 0x0008 253 253 000 Old_age
line - 0
199 UDMA_CRC_Error_Count 0x0008 199 199 000 Old_age
line - 0
200 Multi_Zone_Error_Rate 0x000a 253 252 000 Old_age
ys - 0
201 Soft_Read_Error_Rate 0x000a 253 252 000 Old_age
ys - 12
202 TA_Increase_Count 0x000a 253 252 000 Old_age
ys - 0
203 Run_Out_Cancel 0x000b 253 252 180 Pre-fail
s - 1
204 Shock_Count_Write_Opern 0x000a 253 252 000 Old_age
ys - 0
205 Shock_Rate_Write_Opern 0x000a 253 252 000 Old_age
ys - 0
207 Spin_High_Current 0x002a 253 252 000 Old_age
ys - 0
208 Spin_Buzz 0x002a 253 252 000 Old_age
ys - 0
209 Offline_Seek_Performnce 0x0024 200 200 000 Old_age
line - 0
99 Unknown_Attribute 0x0004 253 253 000 Old_age
line - 0
100 Unknown_Attribute 0x0004 253 253 000 Old_age
line - 0
101 Unknown_Attribute 0x0004 253 253 000 Old_age
line - 0
SMART Error Log Version: 1
ATA Error Count: 1
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an
unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 50 40 97 03 10 Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ef fe 00 00 00 00 10 00 00:05:42.512 SET FEATURES [Reserved for CFA]
c3 3d 00 00 00 00 10 00 00:05:42.464 [VENDOR SPECIFIC]
c3 e4 00 00 00 00 10 00 00:05:42.432 [VENDOR SPECIFIC]
c3 3d 00 00 00 00 10 00 00:05:42.432 [VENDOR SPECIFIC]
70 00 00 00 5e 20 10 00 00:05:42.368 SEEK [OBS-7]
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Thank you for looking at it!! Please response if you have any comments about
the above output. Thanks a lot!!
Zoltan
----- Original Message -----
> At 06:23 AM 29/04/2005, Zoltan Frombach wrote:
>>Apr 29 02:10:24 www kernel: swap_pager: indefinite wait buffer: device:
>>ad0s1e, blkno: 329842, size: 4096
>
> As others have said, it looks to be a hard drive about to die. You can
> get more info with /usr/ports/sysutils/smartmontools/. It can give some
> simple diagnostics that might confirm this for you.
>
> ---Mike
More information about the freebsd-stable
mailing list