Reproducible panic 5.4-stable when booting with -v
Marc Olzheim
marcolz at stack.nl
Wed Apr 27 10:40:22 PDT 2005
The same system about which I just mailed, crashes when booting with
verbose logging enabled. With a normal boot, everything's ok...
Marc
-------------- next part --------------
KDB: debugger backends: ddb
KDB: current backend: ddb
131072K of memory above 4GB ignored
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-STABLE #8: Wed Apr 27 18:19:02 CEST 2005
root at rave.ilse.net:/usr/obj/usr/src/sys/SE3DEBUG
WARNING: WITNESS option enabled, expect reduced performance.
ACPI APIC Table: <PTLTD APIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 3.20GHz (3199.11-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf25 Stepping = 5
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 4160225280 (3967 MB)
avail memory = 4073390080 (3884 MB)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 6
cpu3 (AP): APIC ID: 7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD RSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU (2 Cx states)> on acpi0
cpu1: <ACPI CPU (2 Cx states)> on acpi0
cpu2: <ACPI CPU (2 Cx states)> on acpi0
cpu3: <ACPI CPU (2 Cx states)> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <unknown> at device 0.1 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <base peripheral, interrupt controller> at device 28.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 29.0 on pci1
pci2: <ACPI PCI bus> on pcib2
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0x3000-0x303f mem 0xfc200000-0xfc21ffff irq 54 at device 3.0 on pci2
em0: Ethernet address: 00:30:48:2b:4d:06
em0: Speed:N/A Duplex:N/A
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0x3040-0x307f mem 0xfc220000-0xfc23ffff irq 55 at device 3.1 on pci2
em1: Ethernet address: 00:30:48:2b:4d:07
em1: Speed:N/A Duplex:N/A
pci1: <base peripheral, interrupt controller> at device 30.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 31.0 on pci1
pci3: <ACPI PCI bus> on pcib3
ahd0: <Adaptec AIC7902 Ultra320 SCSI adapter> port 0x4000-0x40ff,0x4400-0x44ff mem 0xfc300000-0xfc301fff irq 28 at device 2.0 on pci3
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
ahd1: <Adaptec AIC7902 Ultra320 SCSI adapter> port 0x4800-0x48ff,0x4c00-0x4cff mem 0xfc302000-0xfc303fff irq 29 at device 2.1 on pci3
aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
pci0: <serial bus, USB> at device 29.0 (no driver attached)
pci0: <serial bus, USB> at device 29.1 (no driver attached)
pci0: <serial bus, USB> at device 29.2 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pci4: <display, VGA> at device 1.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 UDMA100 controller> port 0x2060-0x206f,0x376,0x170-0x177 at device 31.1 on pci0
ata2: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
sio0: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 flags 0x10 on acpi0
sio0: type 16550A, console
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
orm0: <ISA Option ROMs> at iomem 0xe0000-0xe3fff,0xca000-0xcafff,0xc9000-0xc9fff,0xc8000-0xc8fff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
IPv6 packet filtering initialized, default to accept, logging disabled
ipfw2 initialized, divert disabled, rule-based forwarding disabled, default to accept, logging disabled
acd0: CDROM <CD-224E/1.9A> at ata1-master PIO4
Waiting 5 seconds for SCSI devices to settle
ses0 at ahd0 bus 0 target 6 lun 0
ses0: <SUPER GEM318 0> Fixed Processor SCSI-2 device
ses0: 3.300MB/s transfers
ses0: SAF-TE Compliant Device
da0 at ahd0 bus 0 target 0 lun 0
da0: <HITACHI DK32DJ-36MC D4D4> Fixed Direct Access SCSI-3 device
da0: 3.300MB/s transfers, Tagged Queueing Enabled
da0: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
da2 at ahd0 bus 0 target 2 lun 0
da2: <MAXTOR ATLAS10K4_146SCA DF90> Fixed Direct Access SCSI-3 device
da2: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing Enabled
da2: 140299MB (287332384 512 byte sectors: 255H 63S/T 17885C)
da1 at ahd0 bus 0 target 1 lun 0
da1: <SEAGATE ST3146707LC 0003> Fixed Direct Access SCSI-3 device
da1: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da1: 140014MB (286749488 512 byte sectors: 255H 63S/T 17849C)
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Mounting root from ufs:/dev/da0s1a
em0: Link is up 100 Mbps Full Duplex
em1: Link is up 100 Mbps Full Duplex
boot() called on cpu#0
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...1 1 1 1 1 1 0 0 0 0 done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
No buffers busy after final sync
Uptime: 41m12s
Shutting down ACPI
ACPI-0265: *** Error: Hardware never changed modes
Rebooting...
cpu_reset called on cpu#0
cpu_reset: Stopping other CPUs
-------------- next part --------------
KDB: debugger backends: ddb
KDB: current backend: ddb
SMAP type=01 base=0000000000000000 len=000000000009f400
SMAP type=02 base=000000000009f400 len=0000000000000c00
SMAP type=02 base=00000000000e0000 len=0000000000020000
SMAP type=01 base=0000000000100000 len=00000000f7df0000
SMAP type=03 base=00000000f7ef0000 len=0000000000008000
SMAP type=04 base=00000000f7ef8000 len=0000000000008000
SMAP type=01 base=00000000f7f00000 len=0000000000080000
SMAP type=02 base=00000000f7f80000 len=0000000000080000
SMAP type=02 base=00000000fec00000 len=0000000000010000
SMAP type=02 base=00000000fee00000 len=0000000000001000
SMAP type=02 base=00000000ff800000 len=0000000000400000
SMAP type=02 base=00000000fff00000 len=0000000000100000
SMAP type=01 base=0000000100000000 len=0000000008000000
131072K of memory above 4GB ignored
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-STABLE #8: Wed Apr 27 18:19:02 CEST 2005
root at rave.ilse.net:/usr/obj/usr/src/sys/SE3DEBUG
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0876000.
Preloaded elf module "/boot/kernel/mem.ko" at 0xc08762e4.
Preloaded elf module "/boot/kernel/io.ko" at 0xc087638c.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0876434.
Table 'FACP' at 0xf7ef4519
Table 'APIC' at 0xf7ef7eec
MADT: Found table at 0xf7ef7eec
MP Configuration Table version 1.4 found at 0xc009f9a0
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 6 ACPI ID 1: enabled
SMP: Added CPU 6 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 2: enabled
SMP: Added CPU 1 (AP)
MADT: Found CPU APIC ID 7 ACPI ID 3: enabled
SMP: Added CPU 7 (AP)
ACPI APIC Table: <PTLTD APIC >
Calibrating clock(s) ... i8254 clock: 1193354 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 3199109396 Hz
CPU: Intel(R) Xeon(TM) CPU 3.20GHz (3199.11-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf25 Stepping = 5
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 4160225280 (3967 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c28000 - 0x00000000f3909fff, 4073594880 bytes (994530 pages)
0x00000000f7f00000 - 0x00000000f7f77fff, 491520 bytes (120 pages)
avail memory = 4073390080 (3884 MB)
APIC ID: physical 0, logical 0:0
APIC ID: physical 1, logical 0:1
APIC ID: physical 6, logical 0:2
APIC ID: physical 7, logical 0:3
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 6
cpu3 (AP): APIC ID: 7
bios32: Found BIOS32 Service Directory header at 0xc00f6cd0
bios32: Entry = 0xfd6a1 (c00fd6a1) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd6a0+0x225
pnpbios: Found PnP BIOS data at 0xc00f6d30
pnpbios: Entry = f0000:975a Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 2
APIC: CPU 2 has ACPI ID 1
APIC: CPU 3 has ACPI ID 3
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: Found IO APIC ID 3, Interrupt 24 at 0xfec80000
ioapic1: intpin 0 -> PCI IRQ 24 (level, low)
ioapic1: intpin 1 -> PCI IRQ 25 (level, low)
ioapic1: intpin 2 -> PCI IRQ 26 (level, low)
ioapic1: intpin 3 -> PCI IRQ 27 (level, low)
ioapic1: intpin 4 -> PCI IRQ 28 (level, low)
ioapic1: intpin 5 -> PCI IRQ 29 (level, low)
ioapic1: intpin 6 -> PCI IRQ 30 (level, low)
ioapic1: intpin 7 -> PCI IRQ 31 (level, low)
ioapic1: intpin 8 -> PCI IRQ 32 (level, low)
ioapic1: intpin 9 -> PCI IRQ 33 (level, low)
ioapic1: intpin 10 -> PCI IRQ 34 (level, low)
ioapic1: intpin 11 -> PCI IRQ 35 (level, low)
ioapic1: intpin 12 -> PCI IRQ 36 (level, low)
ioapic1: intpin 13 -> PCI IRQ 37 (level, low)
ioapic1: intpin 14 -> PCI IRQ 38 (level, low)
ioapic1: intpin 15 -> PCI IRQ 39 (level, low)
ioapic1: intpin 16 -> PCI IRQ 40 (level, low)
ioapic1: intpin 17 -> PCI IRQ 41 (level, low)
ioapic1: intpin 18 -> PCI IRQ 42 (level, low)
ioapic1: intpin 19 -> PCI IRQ 43 (level, low)
ioapic1: intpin 20 -> PCI IRQ 44 (level, low)
ioapic1: intpin 21 -> PCI IRQ 45 (level, low)
ioapic1: intpin 22 -> PCI IRQ 46 (level, low)
ioapic1: intpin 23 -> PCI IRQ 47 (level, low)
MADT: Found IO APIC ID 4, Interrupt 48 at 0xfec80400
ioapic2: intpin 0 -> PCI IRQ 48 (level, low)
ioapic2: intpin 1 -> PCI IRQ 49 (level, low)
ioapic2: intpin 2 -> PCI IRQ 50 (level, low)
ioapic2: intpin 3 -> PCI IRQ 51 (level, low)
ioapic2: intpin 4 -> PCI IRQ 52 (level, low)
ioapic2: intpin 5 -> PCI IRQ 53 (level, low)
ioapic2: intpin 6 -> PCI IRQ 54 (level, low)
ioapic2: intpin 7 -> PCI IRQ 55 (level, low)
ioapic2: intpin 8 -> PCI IRQ 56 (level, low)
ioapic2: intpin 9 -> PCI IRQ 57 (level, low)
ioapic2: intpin 10 -> PCI IRQ 58 (level, low)
ioapic2: intpin 11 -> PCI IRQ 59 (level, low)
ioapic2: intpin 12 -> PCI IRQ 60 (level, low)
ioapic2: intpin 13 -> PCI IRQ 61 (level, low)
ioapic2: intpin 14 -> PCI IRQ 62 (level, low)
ioapic2: intpin 15 -> PCI IRQ 63 (level, low)
ioapic2: intpin 16 -> PCI IRQ 64 (level, low)
ioapic2: intpin 17 -> PCI IRQ 65 (level, low)
ioapic2: intpin 18 -> PCI IRQ 66 (level, low)
ioapic2: intpin 19 -> PCI IRQ 67 (level, low)
ioapic2: intpin 20 -> PCI IRQ 68 (level, low)
ioapic2: intpin 21 -> PCI IRQ 69 (level, low)
ioapic2: intpin 22 -> PCI IRQ 70 (level, low)
ioapic2: intpin 23 -> PCI IRQ 71 (level, low)
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: high
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: active-high
lapic6: Routing NMI -> LINT1
lapic6: LINT1 trigger: edge
lapic6: LINT1 polarity: active-high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: active-high
lapic7: Routing NMI -> LINT1
lapic7: LINT1 trigger: edge
lapic7: LINT1 polarity: active-high
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x01000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
random: <entropy source, Software, Yarrow>
mem: <memory>
Pentium Pro MTRR support enabled
io: <I/O>
null: <null device, zero device>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD RSDT> on motherboard
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80031000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=254c8086)
pcibios: BIOS version 2.10
Found $PIR table, 24 entries at 0xc00fde40
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
slot 1 2 1 A 0x68 3 4 5 7 10 11 12 14 15
slot 1 2 1 B 0x68 3 4 5 7 10 11 12 14 15
slot 1 2 1 C 0x68 3 4 5 7 10 11 12 14 15
slot 1 2 1 D 0x68 3 4 5 7 10 11 12 14 15
slot 10 2 3 A 0x68 3 4 5 7 10 11 12 14 15
slot 10 2 3 B 0x68 3 4 5 7 10 11 12 14 15
slot 10 2 3 C 0x68 3 4 5 7 10 11 12 14 15
slot 10 2 3 D 0x68 3 4 5 7 10 11 12 14 15
slot 3 2 2 A 0x68 3 4 5 7 10 11 12 14 15
slot 3 2 2 B 0x68 3 4 5 7 10 11 12 14 15
slot 3 2 2 C 0x68 3 4 5 7 10 11 12 14 15
slot 3 2 2 D 0x68 3 4 5 7 10 11 12 14 15
slot 2 3 1 A 0x68 3 4 5 7 10 11 12 14 15
slot 2 3 1 B 0x68 3 4 5 7 10 11 12 14 15
slot 2 3 1 C 0x68 3 4 5 7 10 11 12 14 15
slot 2 3 1 D 0x68 3 4 5 7 10 11 12 14 15
slot 5 3 2 A 0x68 3 4 5 7 10 11 12 14 15
slot 5 3 2 B 0x68 3 4 5 7 10 11 12 14 15
slot 5 3 2 C 0x68 3 4 5 7 10 11 12 14 15
slot 5 3 2 D 0x68 3 4 5 7 10 11 12 14 15
slot 6 3 3 A 0x68 3 4 5 7 10 11 12 14 15
slot 6 3 3 B 0x68 3 4 5 7 10 11 12 14 15
slot 6 3 3 C 0x68 3 4 5 7 10 11 12 14 15
slot 6 3 3 D 0x68 3 4 5 7 10 11 12 14 15
slot 11 3 4 A 0x68 3 4 5 7 10 11 12 14 15
slot 11 3 4 B 0x68 3 4 5 7 10 11 12 14 15
slot 11 3 4 C 0x68 3 4 5 7 10 11 12 14 15
slot 11 3 4 D 0x68 3 4 5 7 10 11 12 14 15
slot 3 17 1 A 0x63 3 4 5 7 10 11 12 14 15
slot 3 17 1 B 0x63 3 4 5 7 10 11 12 14 15
slot 3 17 1 C 0x63 3 4 5 7 10 11 12 14 15
slot 3 17 1 D 0x63 3 4 5 7 10 11 12 14 15
slot 4 18 1 A 0x63 3 4 5 7 10 11 12 14 15
slot 4 18 1 B 0x63 3 4 5 7 10 11 12 14 15
slot 4 18 1 C 0x63 3 4 5 7 10 11 12 14 15
slot 4 18 1 D 0x63 3 4 5 7 10 11 12 14 15
slot 7 4 1 A 0x60 3 4 5 7 10 11 12 14 15
slot 7 4 1 B 0x60 3 4 5 7 10 11 12 14 15
slot 7 4 1 C 0x60 3 4 5 7 10 11 12 14 15
slot 7 4 1 D 0x60 3 4 5 7 10 11 12 14 15
slot 8 4 2 A 0x61 3 4 5 7 10 11 12 14 15
slot 8 4 2 B 0x61 3 4 5 7 10 11 12 14 15
slot 8 4 2 C 0x61 3 4 5 7 10 11 12 14 15
slot 8 4 2 D 0x61 3 4 5 7 10 11 12 14 15
slot 9 4 3 A 0x62 3 4 5 7 10 11 12 14 15
slot 9 4 3 B 0x62 3 4 5 7 10 11 12 14 15
slot 9 4 3 C 0x62 3 4 5 7 10 11 12 14 15
slot 9 4 3 D 0x62 3 4 5 7 10 11 12 14 15
embedded 0 29 A 0x60 3 4 5 7 10 11 12 14 15
embedded 0 29 B 0x63 3 4 5 7 10 11 12 14 15
embedded 0 29 C 0x62 3 4 5 7 10 11 12 14 15
embedded 0 31 A 0x62 3 4 5 7 10 11 12 14 15
embedded 0 31 B 0x61 3 4 5 7 10 11 12 14 15
AcpiOsDerivePciId: bus 0 dev 31 func 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: Power Button (fixed)
AcpiOsDerivePciId: bus 0 dev 0 func 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
ACPI timer: 1/0 1/0 1/1 1/0 1/1 1/0 1/0 1/0 1/0 1/0 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU (2 Cx states)> on acpi0
cpu1: <ACPI CPU (2 Cx states)> on acpi0
cpu2: <ACPI CPU (2 Cx states)> on acpi0
cpu3: <ACPI CPU (2 Cx states)> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI PCI link initial configuration:
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x254c, revid=0x01
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0106, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2541, revid=0x01
bus=0, slot=0, func=1
class=ff-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2543, revid=0x01
bus=0, slot=2, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 00002000, size 5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2482, revid=0x02
bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
map[20]: type 4, range 32, base 00002020, size 5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x2484, revid=0x02
bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=19
map[20]: type 4, range 32, base 00002040, size 5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x2487, revid=0x02
bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=18
found-> vendor=0x8086, dev=0x244e, revid=0x42
bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2480, revid=0x02
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 00000000, size 3, enabled
map[14]: type 4, range 32, base 00000000, size 2, enabled
map[20]: type 4, range 32, base 00002060, size 4, enabled
found-> vendor=0x8086, dev=0x248b, revid=0x02
bus=0, slot=31, func=1
class=01-01-8b, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[20]: type 4, range 32, base 00001100, size 5, enabled
found-> vendor=0x8086, dev=0x2483, revid=0x02
bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=255
pci0: <unknown> at device 0.1 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 3
pcib1: I/O decode 0x3000-0x4fff
pcib1: memory decode 0xfc100000-0xfc3fffff
pcib1: prefetched decode 0xfff00000-0xfffff
pcib1: could not get PCI interrupt routing table for \_SB_.PCI0.HLB_ - AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 1, range 32, base fc100000, size 12, enabled
pcib1: device (null) requested decoded memory range 0xfc100000-0xfc100fff
found-> vendor=0x8086, dev=0x1461, revid=0x04
bus=1, slot=28, func=0
class=08-00-20, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0030, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x1460, revid=0x04
bus=1, slot=29, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0030, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x24 (9000 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base fc101000, size 12, enabled
pcib1: device (null) requested decoded memory range 0xfc101000-0xfc101fff
found-> vendor=0x8086, dev=0x1461, revid=0x04
bus=1, slot=30, func=0
class=08-00-20, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0030, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x1460, revid=0x04
bus=1, slot=31, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0030, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x24 (9000 ns), maxlat=0x00 (0 ns)
pci1: <base peripheral, interrupt controller> at device 28.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 29.0 on pci1
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0x3000-0x3fff
pcib2: memory decode 0xfc200000-0xfc2fffff
pcib2: prefetched decode 0xfff00000-0xfffff
ACPI PCI link initial configuration:
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
map[10]: type 1, range 64, base fc200000, size 17, enabled
pcib2: device (null) requested decoded memory range 0xfc200000-0xfc21ffff
pcib1: device (null) requested decoded memory range 0xfc200000-0xfc21ffff
map[20]: type 4, range 32, base 00003000, size 6, enabled
pcib2: device (null) requested decoded I/O range 0x3000-0x303f
pcib1: device (null) requested decoded I/O range 0x3000-0x303f
pcib2: matched entry for 2.3.INTA
pcib2: slot 3 INTA hardwired to IRQ 54
found-> vendor=0x8086, dev=0x1010, revid=0x01
bus=2, slot=3, func=0
class=02-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0117, statreg=0x0230, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=54
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 1, range 64, base fc220000, size 17, enabled
pcib2: device (null) requested decoded memory range 0xfc220000-0xfc23ffff
pcib1: device (null) requested decoded memory range 0xfc220000-0xfc23ffff
map[20]: type 4, range 32, base 00003040, size 6, enabled
pcib2: device (null) requested decoded I/O range 0x3040-0x307f
pcib1: device (null) requested decoded I/O range 0x3040-0x307f
pcib2: matched entry for 2.3.INTB
pcib2: slot 3 INTB hardwired to IRQ 55
found-> vendor=0x8086, dev=0x1010, revid=0x01
bus=2, slot=3, func=1
class=02-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0117, statreg=0x0230, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
intpin=b, irq=55
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0x3000-0x303f mem 0xfc200000-0xfc21ffff irq 54 at device 3.0 on pci2
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfc200000
em0: Reserved 0x40 bytes for rid 0x20 type 4 at 0x3000
em0: [MPSAFE]
em0: bpf attached
em0: Ethernet address: 00:30:48:2b:4d:06
em0: Speed:N/A Duplex:N/A
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0x3040-0x307f mem 0xfc220000-0xfc23ffff irq 55 at device 3.1 on pci2
em1: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfc220000
em1: Reserved 0x40 bytes for rid 0x20 type 4 at 0x3040
em1: [MPSAFE]
em1: bpf attached
em1: Ethernet address: 00:30:48:2b:4d:07
em1: Speed:N/A Duplex:N/A
pci1: <base peripheral, interrupt controller> at device 30.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 31.0 on pci1
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0x4000-0x4fff
pcib3: memory decode 0xfc300000-0xfc3fffff
pcib3: prefetched decode 0xfff00000-0xfffff
ACPI PCI link initial configuration:
pci3: <ACPI PCI bus> on pcib3
pci3: physical bus=3
map[10]: type 4, range 32, base 00004400, size 8, enabled
pcib3: device (null) requested decoded I/O range 0x4400-0x44ff
pcib1: device (null) requested decoded I/O range 0x4400-0x44ff
map[14]: type 1, range 64, base fc300000, size 13, enabled
pcib3: device (null) requested decoded memory range 0xfc300000-0xfc301fff
pcib1: device (null) requested decoded memory range 0xfc300000-0xfc301fff
map[1c]: type 4, range 32, base 00004000, size 8, enabled
pcib3: device (null) requested decoded I/O range 0x4000-0x40ff
pcib1: device (null) requested decoded I/O range 0x4000-0x40ff
pcib3: matched entry for 3.2.INTA
pcib3: slot 2 INTA hardwired to IRQ 28
found-> vendor=0x9005, dev=0x801d, revid=0x10
bus=3, slot=2, func=0
class=01-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0117, statreg=0x0430, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x28 (10000 ns), maxlat=0x19 (6250 ns)
intpin=a, irq=28
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
map[10]: type 4, range 32, base 00004c00, size 8, enabled
pcib3: device (null) requested decoded I/O range 0x4c00-0x4cff
pcib1: device (null) requested decoded I/O range 0x4c00-0x4cff
map[14]: type 1, range 64, base fc302000, size 13, enabled
pcib3: device (null) requested decoded memory range 0xfc302000-0xfc303fff
pcib1: device (null) requested decoded memory range 0xfc302000-0xfc303fff
map[1c]: type 4, range 32, base 00004800, size 8, enabled
pcib3: device (null) requested decoded I/O range 0x4800-0x48ff
pcib1: device (null) requested decoded I/O range 0x4800-0x48ff
pcib3: matched entry for 3.2.INTB
pcib3: slot 2 INTB hardwired to IRQ 29
found-> vendor=0x9005, dev=0x801d, revid=0x10
bus=3, slot=2, func=1
class=01-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0117, statreg=0x0430, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x28 (10000 ns), maxlat=0x19 (6250 ns)
intpin=b, irq=29
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
ahd0: <Adaptec AIC7902 Ultra320 SCSI adapter> port 0x4000-0x40ff,0x4400-0x44ff mem 0xfc300000-0xfc301fff irq 28 at device 2.0 on pci3
ahd0: Defaulting to MEMIO on
ahd0: Reserved 0x2000 bytes for rid 0x14 type 3 at 0xfc300000
ahd0: Reading VPD from SEEPROM...ahd0: VPD parsing successful
ahd0: Reading SEEPROM...done.
ahd0: STPWLEVEL is on
ahd0: Manual Primary Termination
ahd0: Manual Secondary Termination
ahd0: Primary High byte termination Enabled
ahd0: Primary Low byte termination Enabled
ahd0: Secondary High byte termination Disabled
ahd0: Secondary Low byte termination Disabled
ahd0: Downloading Sequencer Program... 696 instructions downloaded
ahd0: Features 0x3c101, Bugs 0x740002, Flags 0x43f1
ahd0: [GIANT-LOCKED]
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
ahd1: <Adaptec AIC7902 Ultra320 SCSI adapter> port 0x4800-0x48ff,0x4c00-0x4cff mem 0xfc302000-0xfc303fff irq 29 at device 2.1 on pci3
ahd1: Defaulting to MEMIO on
ahd1: Reserved 0x2000 bytes for rid 0x14 type 3 at 0xfc302000
ahd1: Reading VPD from SEEPROM...ahd1: VPD parsing successful
ahd1: Reading SEEPROM...done.
ahd1: STPWLEVEL is on
ahd1: Manual Primary Termination
ahd1: Manual Secondary Termination
ahd1: Primary High byte termination Enabled
ahd1: Primary Low byte termination Enabled
ahd1: Secondary High byte termination Disabled
ahd1: Secondary Low byte termination Disabled
ahd1: Downloading Sequencer Program... 696 instructions downloaded
ahd1: Features 0x3c101, Bugs 0x740002, Flags 0x43f0
ahd1: [GIANT-LOCKED]
aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
pci0: <serial bus, USB> at device 29.0 (no driver attached)
pci0: <serial bus, USB> at device 29.1 (no driver attached)
pci0: <serial bus, USB> at device 29.2 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib4: secondary bus 4
pcib4: subordinate bus 4
pcib4: I/O decode 0x5000-0x5fff
pcib4: memory decode 0xfc400000-0xfdffffff
pcib4: prefetched decode 0xfff00000-0xfffff
pcib4: Subtractively decoded bridge.
ACPI PCI link initial configuration:
pci4: <ACPI PCI bus> on pcib4
pci4: physical bus=4
map[10]: type 1, range 32, base fd000000, size 24, enabled
pcib4: device (null) requested decoded memory range 0xfd000000-0xfdffffff
map[14]: type 4, range 32, base 00005000, size 8, enabled
pcib4: device (null) requested decoded I/O range 0x5000-0x50ff
map[18]: type 1, range 32, base fc400000, size 12, enabled
pcib4: device (null) requested decoded memory range 0xfc400000-0xfc400fff
pcib4: matched entry for 4.1.INTA
pcib4: slot 1 INTA hardwired to IRQ 16
found-> vendor=0x1002, dev=0x4752, revid=0x27
bus=4, slot=1, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
powerspec 2 supports D0 D1 D2 D3 current D0
pci4: <display, VGA> at device 1.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 UDMA100 controller> port 0x2060-0x206f,0x376,0x170-0x177 at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x2060
ata2: channel #0 on atapci0
atapci0: Lazy allocation of 0x8 bytes rid 0x10 type 4 at 0x1f0
atapci0: Lazy allocation of 0x4 bytes rid 0x14 type 4 at 0x3f8
ata2: reset tp1 mask=00 ostat0=ff ostat1=ff
ata2: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=01
ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1-slave: stat=0x01 err=0x04 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=00 stat1=01 devices=0x4<ATAPI_MASTER>
ata1: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
kbd0: atkbd0, generic (0), config:0x0, flags:0x1f0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0067
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
sio0: irq maps: 0x8001 0x8011 0x8011 0x8011
sio0: probe failed test(s): 1 2 4 6 7 9
sio0: irq maps: 0x8011 0x8019 0x8011 0x8011
sio0: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 flags 0x10 on acpi0
sio0: type 16550A, console
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
unknown: not probed (disabled)
sio1: irq maps: 0x8001 0x8011 0x8011 0x8011
sio1: probe failed test(s): 1 2 4 6 7 9
unknown: not probed (disabled)
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
sio: sio0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ahc_isa_probe 0: ioport 0xc00 alloc failed
ahc_isa_probe 4: ioport 0x4c00 alloc failed
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xe0000-0xe3fff,0xca000-0xcafff,0xc9000-0xc9fff,0xc8000-0xc8fff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
ata0 failed to probe at port 0x1f0 irq 14 on isa0
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0 failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1 failed to probe at port 0x2f8 irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 03 c0 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 255058 -> 100000
procfs registered
Timecounter "TSC" frequency 3199109396 Hz quality -100
Timecounters tick every 10.000 msec
IPv6 packet filtering initialized, default to accept, logging disabled
lo0: bpf attached
ipfw2 initialized, divert disabled, rule-based forwarding disabled, default to accept, logging disabled
ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata1-master: setting PIO4 on Intel ICH3 chip
acd0: <CD-224E/1.9A> CDROM drive at ata1 as master
acd0: read 4134KB/s (4134KB/s), 128KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
Waiting 5 seconds for SCSI devices to settle
(noperiph:ahd0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
(noperiph:ahd1:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
ahd0: Selection Timeout on A:8. 0 SCBs aborted
ahd1: Selection Timeout on A:5. 0 SCBs aborted
ahd0: Selection Timeout on A:9. 0 SCBs aborted
ahd1: Selection Timeout on A:6. 0 SCBs aborted
ahd0: Selection Timeout on A:10. 0 SCBs aborted
ahd1: Selection Timeout on A:8. 0 SCBs aborted
ahd0: Selection Timeout on A:11. 0 SCBs aborted
ahd1: Selection Timeout on A:9. 0 SCBs aborted
ahd0: Selection Timeout on A:3. 0 SCBs aborted
ahd1: Selection Timeout on A:10. 0 SCBs aborted
ahd0: Selection Timeout on A:4. 0 SCBs aborted
ahd1: Selection Timeout on A:11. 0 SCBs aborted
ahd0: Selection Timeout on A:5. 0 SCBs aborted
ahd1: Selection Timeout on A:0. 0 SCBs aborted
ahd0: Selection Timeout on A:12. 0 SCBs aborted
ahd1: Selection Timeout on A:1. 0 SCBs aborted
ahd0: Selection Timeout on A:13. 0 SCBs aborted
ahd1: Selection Timeout on A:2. 0 SCBs aborted
ahd0: Selection Timeout on A:14. 0 SCBs aborted
ahd1: Selection Timeout on A:3. 0 SCBs aborted
ahd0: Selection Timeout on A:15. 0 SCBs aborted
(probe0:ahd0:0:0:0): Retrying Command
ahd1: Selection Timeout on A:4. 0 SCBs aborted
(probe2:ahd0:0:2:0): Retrying Command
(probe1:ahd0:0:1:0): Retrying Command
(ahd0:A:0:0): Sending PPR bus_width 1, period 8, offset fe, ppr_options ff
(ahd0:A:0:0): Received PPR width 1, period 9, offset 64,options fa
Filtered to width 0, period 0, offset 0, options 0
ahd1: Selection Timeout on A:12. 0 SCBs aborted
(ahd0:A:2:0): Sending PPR bus_width 1, period 8, offset fe, ppr_options ff
(ahd0:A:2:0): Received PPR width 1, period 8, offset 7f,options 47
Filtered to width 1, period 8, offset 7f, options 47
ahd0: target 2 using 16bit transfers
ahd0: target 2 synchronous with period = 0x8, offset = 0x7f(DT|IU|RTI|QAS)
ahd1: Selection Timeout on A:13. 0 SCBs aborted
(ahd0:A:1:0): Sending PPR bus_width 1, period 8, offset fe, ppr_options ff
(ahd0:A:1:0): Received PPR width 1, period 8, offset 3f,options ff
Filtered to width 1, period 8, offset 3f, options ff
ahd0: target 1 using 16bit transfers
ahd0: target 1 synchronous with period = 0x8, offset = 0x3f(RDSTRM|DT|IU|RTI|QAS)
ahd1: Selection Timeout on A:14. 0 SCBs aborted
ahd0: Invalid Sequencer interrupt occurred.
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd0: Dumping Card State at program address 0x23b Mode 0x0
Card was paused
INTSTAT[0x0] SELOID[0x1] SELID[0x20] HS_MAILBOX[0x0]
INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE)
SCSISIGI[0x0]:(P_DATAOUT) SCSIPHASE[0x0] SCSIBUS[0x0]
LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0]
SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x6]:(INTMASK1|INTMASK2)
SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x4]
KERNEL_QFREEZE_COUNT[0x4] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff]
SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO) LQISTAT0[0x0]
LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0]
LQOSTAT2[0x0]
SCB Count = 16 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x9 NEXTSCB 0xff40
qinstart = 43 qinfifonext = 45
QINFIFO: 0xa 0x8
WAITING_TID_QUEUES:
Pending list:
8 FIFO_USE[0x0] SCB_CONTROL[0x48]:(STATUS_RCVD|DISCENB) SCB_SCSIID[0x67]
10 FIFO_USE[0x0] SCB_CONTROL[0x48]:(STATUS_RCVD|DISCENB) SCB_SCSIID[0x7]
Total 2
Kernel Free SCB list: 9 15 1 2 3 4 5 6 7 11 12 13 14 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd0: FIFO0 Free, LONGJMP == 0x8000, SCB 0xf
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
ahd0: FIFO1 Free, LONGJMP == 0x8063, SCB 0x8
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x8 0x0 0x0 0xf 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
ahd0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x42
ahd0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1
ahd0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
CCSCBCTL[0x0]
ahd0: REG0 == 0x1560, SINDEX = 0x10e, DINDEX = 0x104
ahd0: SCBPTR == 0xf, SCB_NEXT == 0xff40, SCB_NEXT2 == 0x9
CDB 12 20 0 80 88 66
STACK: 0x236 0x2 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
ahd0: target 1 using 8bit transfers
ahd0: target 1 using asynchronous transfers
ahd0: target 2 using 8bit transfers
ahd0: target 2 using asynchronous transfers
ahd1: Selection Timeout on A:15. 0 SCBs aborted
(probe0:ahd0:0:0:2): Request Requeued
(probe0:ahd0:0:0:2): Retrying Command
(probe3:ahd0:0:6:5): Request Requeued
(probe3:ahd0:0:6:5): Retrying Command
(ahd0:A:2:2): Sending PPR bus_width 1, period 8, offset 7f, ppr_options c7
(ahd0:A:2:2): Received PPR width 1, period 8, offset 7f,options 47
Filtered to width 1, period 8, offset 7f, options 47
ahd0: target 2 using 16bit transfers
ahd0: target 2 synchronous with period = 0x8, offset = 0x7f(DT|IU|RTI|QAS)
(probe1:ahd0:0:2:2): Request Requeued
(probe1:ahd0:0:2:2): Retrying Command
(ahd0:A:1:1): Sending PPR bus_width 1, period 8, offset 3f, ppr_options ff
(ahd0:A:1:1): Received PPR width 1, period 8, offset 3f,options ff
Filtered to width 1, period 8, offset 3f, options ff
ahd0: target 1 using 16bit transfers
ahd0: target 1 synchronous with period = 0x8, offset = 0x3f(RDSTRM|DT|IU|RTI|QAS)
(probe2:ahd0:0:1:1): Request Requeued
(probe2:ahd0:0:1:1): Retrying Command
ahd0: target 2 using 8bit transfers
ahd0: target 2 using asynchronous transfers
ahd0: Selection Timeout on A:2. 0 SCBs aborted
ahd0: Selection Timeout on A:2. 0 SCBs aborted
ahd0: Selection Timeout on A:2. 0 SCBs aborted
ahd0: Invalid Sequencer interrupt occurred.
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd0: Dumping Card State at program address 0x23b Mode 0x0
Card was paused
INTSTAT[0x0] SELOID[0x2] SELID[0x10] HS_MAILBOX[0x0]
INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE)
SCSISIGI[0x0]:(P_DATAOUT) SCSIPHASE[0x0] SCSIBUS[0x0]
LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0]
SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x6]:(INTMASK1|INTMASK2)
SEQ_FLAGS[0xc0]:(NO_CDB_SENT|NOT_IDENTIFIED) SEQ_FLAGS2[0x0]
QFREEZE_COUNT[0x4] KERNEL_QFREEZE_COUNT[0x4] MK_MESSAGE_SCB[0xff00]
MK_MESSAGE_SCSIID[0xff] SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0]
SSTAT3[0x0] PERRDIAG[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0]
LQOSTAT1[0x0] LQOSTAT2[0xe1]:(LQOSTOP0|LQOPKT)
SCB Count = 16 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0xa NEXTSCB 0xff80
qinstart = 58 qinfifonext = 58
QINFIFO:
WAITING_TID_QUEUES:
0 ( 0xf )
Pending list:
15 FIFO_USE[0x0] SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0x7]
Total 1
Kernel Free SCB list: 8 10 9 1 2 3 4 5 6 7 11 12 13 14 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd0: FIFO0 Free, LONGJMP == 0x8000, SCB 0x8
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
ahd0: FIFO1 Free, LONGJMP == 0x8063, SCB 0xf
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x8 0x0 0x0 0x8 0x0 0x2 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
ahd0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x42
ahd0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1
ahd0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
CCSCBCTL[0x4]:(CCSCBDIR)
ahd0: REG0 == 0x1560, SINDEX = 0x10e, DINDEX = 0x102
ahd0: SCBPTR == 0x8, SCB_NEXT == 0xff80, SCB_NEXT2 == 0xa
CDB 12 40 0 80 8 5c
STACK: 0x36 0x24 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
ahd0: target 1 using 8bit transfers
ahd0: target 1 using asynchronous transfers
Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address = 0xdeadc0de
fault code = supervisor read, page not present
instruction pointer = 0x8:0xc04411bc
stack pointer = 0x10:0xe7c59a74
frame pointer = 0x10:0xe7c59a80
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 41 (irq28: ahd0)
[thread pid 41 tid 100012 ]
Stopped at 0xc04411bc = xpt_async_bcast+0x18: movl 0(%eax),%ebx
db> trace
Tracing pid 41 tid 100012 td 0xc5648300
xpt_async_bcast(c59b1270,1,c57baaf0,0,1,c57930c0,c57c3e40,c59b1200,0) at 0xc04411bc = xpt_async_bcast+0x18
xpt_async(1,c57baaf0,0,0,c57baaf0) at 0xc044115a = xpt_async+0xca
ahd_send_async(c5794000,41,ffffffff,ffffffff,1) at 0xc0483ea2 = ahd_send_async+0xe2
ahd_reset_channel(c5794000,41,1,c5794000,c06b0522,c5791460) at 0xc047d550 = ahd_reset_channel+0x348
ahd_handle_seqint(c5794000,4) at 0xc046ebf4 = ahd_handle_seqint+0x320
ahd_platform_intr(c5794000) at 0xc04828fb = ahd_platform_intr+0x177
ithread_loop(c5641e80,e7c59d38,c5641e80,c051769c,0) at 0xc05177c0 = ithread_loop+0x124
fork_exit(c051769c,c5641e80,e7c59d38) at 0xc0516bbc = fork_exit+0xa4
fork_trampoline() at 0xc06715cc = fork_trampoline+0x8
--- trap 0x1, eip = 0, esp = 0xe7c59d6c, ebp = 0 ---
db> panic
panic: from debugger
cpuid = 0
KDB: stack backtrace:
kdb_backtrace(100,c5648300,0,c06e4230,c06e424c) at 0xc053f6d1 = kdb_backtrace+0x29
panic(c06abe3e,e7c59928,c044e484,c04411bc,0) at 0xc0529730 = panic+0x114
db_panic(c04411bc,0,ffffffff,e7c5989c,0) at 0xc044e4ed = db_panic+0xd
db_command(c071ffe4,c06ec8e0,c06e4230,c06e424c,c06abe4c) at 0xc044e484 = db_command+0x264
db_command_loop(0,0,e7c59954,e7c59940,e7c59988) at 0xc044e54c = db_command_loop+0x5c
db_trap(c,0,10,e7c59a34,e7c599d0) at 0xc04500d1 = db_trap+0xdd
kdb_trap(c,0,e7c59a34) at 0xc053f9ef = kdb_trap+0x8b
trap_fatal(e7c59a34,deadc0de,c5648300,c1059000,deadc000) at 0xc06817a9 = trap_fatal+0x279
trap_pfault(e7c59a34,0,deadc0de) at 0xc0681507 = trap_pfault+0x16b
trap(c0440018,c5790010,c57c0010,0,1) at 0xc068116d = trap+0x30d
calltrap() at 0xc067156a = calltrap+0x5
--- trap 0xc, eip = 0xc04411bc, esp = 0xe7c59a74, ebp = 0xe7c59a80 ---
xpt_async_bcast(c59b1270,1,c57baaf0,0,1,c57930c0,c57c3e40,c59b1200,0) at 0xc04411bc = xpt_async_bcast+0x18
xpt_async(1,c57baaf0,0,0,c57baaf0) at 0xc044115a = xpt_async+0xca
ahd_send_async(c5794000,41,ffffffff,ffffffff,1) at 0xc0483ea2 = ahd_send_async+0xe2
ahd_reset_channel(c5794000,41,1,c5794000,c06b0522,c5791460) at 0xc047d550 = ahd_reset_channel+0x348
ahd_handle_seqint(c5794000,4) at 0xc046ebf4 = ahd_handle_seqint+0x320
ahd_platform_intr(c5794000) at 0xc04828fb = ahd_platform_intr+0x177
ithread_loop(c5641e80,e7c59d38,c5641e80,c051769c,0) at 0xc05177c0 = ithread_loop+0x124
fork_exit(c051769c,c5641e80,e7c59d38) at 0xc0516bbc = fork_exit+0xa4
--More--
fork_trampoline() at 0xc06715cc = fork_trampoline+0x8
--- trap 0x1, eip = 0, esp = 0xe7c59d6c, ebp = 0 ---
Uptime: 26s
Cannot dump. No dump device defined.
Automatic reboot in 15 seconds - press a key on the console to abort
Rebooting...
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 187 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20050427/eb250b8a/attachment.bin
More information about the freebsd-stable
mailing list