FreeBSD 4.10 + PAE + SunFire v40z (Newisys 4100)

[luke at prgmr.com]

I have this SunFire v40z (as far as I can tell, it is a rebadged 
Newisys 4100.  Sopposedly, sun manufactured it, but I can't find any 
difference between it and the specs for the 4100)  for testing-  4 CPUs, 
8G ram, seperate 'service' processor that acts as a serial server and 
remote rebooter.  So far, it looks very nice, save for one problem. 
I can not boot a PAE kernel off the onboard SCSI.  A rather large problem.

I have the box netbooting right now.  It works fine, save for the LSILogic 
SCSI.

mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x2000-0x20ff mem \
0xe5820000-0xe582fff f,0xe5830000-0xe583ffff irq 19 at device 4.0 on pci2
mpt0: error 16 creating per-cmd DMA maps
mpt0: Could not allocate DMA memory




%uname -a
FreeBSD  4.10-RELEASE FreeBSD 4.10-RELEASE #0: Wed Oct 20 12:11:08 PDT 
2004     luke@:/usr/obj/usr/src/sys/SMP_PAE  i386


full dmesg from the successful netboot follows:

Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights reserved.
FreeBSD 4.10-RELEASE #0: Wed Oct 20 12:11:08 PDT 2004
     luke@:/usr/obj/usr/src/sys/SMP_PAE
Timecounter "i8254"  frequency 1193182 Hz
CPU: AMD Opteron(tm) Processor 848 (2189.08-MHz 686-class CPU)
   Origin = "AuthenticAMD"  Id = 0xf5a  Stepping = 10

Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,\
CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
   AMD Features=0xe0500000<<b20>,AMIE,<b29>,DSP,3DNow!>
real memory  = 8589934592 (8388608K bytes)
avail memory = 7898091520 (7712980K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
Programming 4 pins in IOAPIC #1
Programming 4 pins in IOAPIC #2
Programming 4 pins in IOAPIC #3
Programming 4 pins in IOAPIC #4
Programming 4 pins in IOAPIC #5
Programming 4 pins in IOAPIC #6
FreeBSD/SMP: Multiprocessor motherboard: 4 CPUs
  cpu0 (BSP): apic id:  0, version: 0x00040010, at 0xfee00000
  cpu1 (AP):  apic id:  1, version: 0x00040010, at 0xfee00000
  cpu2 (AP):  apic id:  2, version: 0x00040010, at 0xfee00000
  cpu3 (AP):  apic id:  3, version: 0x00040010, at 0xfee00000
  io0 (APIC): apic id:  4, version: 0x00170011, at 0xfec00000
  io1 (APIC): apic id:  5, version: 0x00030011, at 0xe4000000
  io2 (APIC): apic id:  6, version: 0x00030011, at 0xe4001000
  io3 (APIC): apic id:  7, version: 0x00030011, at 0xe5b01000
  io4 (APIC): apic id:  8, version: 0x00030011, at 0xe5b03000
  io5 (APIC): apic id:  9, version: 0x00030011, at 0xe5b05000
  io6 (APIC): apic id: 10, version: 0x00030011, at 0xe5b07000
Preloaded elf kernel "kernel" at 0xc053f000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 24 entries at 0xc00fde40
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib16: <PCI to PCI bridge (vendor=1022 device=7460)> at device 6.0 on 
pci0
IOAPIC #0 intpin 19 -> irq 2
IOAPIC #0 intpin 17 -> irq 16
pci1: <PCI bus> on pcib16
ohci0: <OHCI (generic) USB controller> mem 0xe4120000-0xe4120fff irq 2 at\ 
device 0.0 on pci1
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xe4121000-0xe4121fff irq 2 at\ 
device 0.1 on pci1
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
pci1: <Trident model 9880 VGA-compatible display device> at 5.0 irq 16
isab0: <PCI to ISA bridge (vendor=1022 device=7468)> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD 8111 ATA133 controller> port 0x1000-0x100f at device 7.1 on\
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
chip0: <PCI to Other bridge (vendor=1022 device=746b)> at device 7.3 on\
pci0
pcib17: <PCI to PCI bridge (vendor=1022 device=7450)> at device 10.0 on\
pci0
IOAPIC #1 intpin 1 -> irq 17
IOAPIC #1 intpin 2 -> irq 18
IOAPIC #1 intpin 3 -> irq 19
pci2: <PCI bus> on pcib17
bge0: <Broadcom BCM5703 Gigabit Ethernet, ASIC rev. 0x1002> mem\
0xe5800000-0xe580ffff irq 17 at device 2.0 on pci2
bge0: Ethernet address: 00:09:3d:00:48:c3
miibus0: <MII bus> on bge0
brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, \
1000baseTX-FDX, auto
bge1: <Broadcom BCM5703 Gigabit Ethernet, ASIC rev. 0x1002> mem\
0xe5810000-0xe581ffff irq 18 at device 3.0 on pci2
bge1: Ethernet address: 00:09:3d:00:4b:e3
miibus1: <MII bus> on bge1
brgphy1: <BCM5703 10/100/1000baseTX PHY> on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, \
1000baseTX-FDX, auto
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x2000-0x20ff mem \
0xe5820000-0xe582ffff,0xe5830000-0xe583ffff irq 19 at device 4.0 on pci2
mpt0: error 16 creating per-cmd DMA maps
mpt0: Could not allocate DMA memory
pci0: <unknown card> (vendor=0x1022, dev=0x7451) at 10.1
pcib18: <PCI to PCI bridge (vendor=1022 device=7450)> at device 11.0 on 
pci0
pci3: <PCI bus> on pcib18
pci0: <unknown card> (vendor=0x1022, dev=0x7451) at 11.1
pcib1: <Host to PCI bridge> on motherboard
pci4: <PCI bus> on pcib1
pcib2: <Host to PCI bridge> on motherboard
pci5: <PCI bus> on pcib2
pcib3: <Host to PCI bridge> on motherboard
pci6: <PCI bus> on pcib3
pcib4: <Host to PCI bridge> on motherboard
pci7: <PCI bus> on pcib4
pcib5: <Host to PCI bridge> on motherboard
pci8: <PCI bus> on pcib5
pcib6: <Host to PCI bridge> on motherboard
pci9: <PCI bus> on pcib6
pcib7: <Host to PCI bridge> on motherboard
pci10: <PCI bus> on pcib7
pcib8: <Host to PCI bridge> on motherboard
pci11: <PCI bus> on pcib8
pcib9: <Host to PCI bridge> on motherboard
pci12: <PCI bus> on pcib9
pcib10: <Host to PCI bridge> on motherboard
pci13: <PCI bus> on pcib10
pcib11: <Host to PCI bridge> on motherboard
pci14: <PCI bus> on pcib11
pcib12: <Host to PCI bridge> on motherboard
pci15: <PCI bus> on pcib12
pcib13: <Host to PCI bridge> on motherboard
pci16: <PCI bus> on pcib13
pcib14: <Host to PCI bridge> on motherboard
pci17: <PCI bus> on pcib14
pcib15: <Host to PCI bridge> on motherboard
pci18: <PCI bus> on pcib15
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc97ff,0xc9800-0xcafff,\
0xcb000-0xcb7ff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: parallel port not found.
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
acd0: DVD-ROM <DV-28E-C> at ata1-master PIO4
NFS ROOT: 10.1.0.1:/home/system/wc/FreeBSD_4_10_test_sandbox/
bge0: gigabit link up