FreeBSD constantly crashing
Stanislav Grozev
tacho at orbitel.bg
Mon Jan 26 21:48:09 PST 2004
Hello,
I have one FreeBSD server, that recently started to behave strangely.
It has been rock-solid for all of its existence (almost 2 years).
Recently I upgraded it to RELENG_4_9 and it started crashing with
kernel panic approximately every 24 hours, but this varies.
I have tried downgrading to RELENG_4_8 and RELENG_4_7 - the same
thing keeps happening. I have also moved the harddrives in a brand
new, albeit identical machine - Duron 800 MHz, 512MB RAM,
Adaptec 29160 Ultra 160 SCSI, two Fujitsu disks in Vinum RAID1.
Here is the kernel panic:
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0x485974e2
fault code = supervisor read, page not present
instruction pointer = 0x8:0xc01cbfe3
stack pointer = 0x10:0xc0311854
frame pointer = 0x10:0xc0311858
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = Idle
interrupt mask =
trap number = 12
panic: page fault
attached are the kernel configuration and the dmesg.
Please, can anyone shed any light on this? I thought it was the hardware,
but I've changed everything except the hard disks - new case, new powersupply,
new motherboard, new processor, new RAM, new Adaptec.
Thanks in advance.
-tacho
-------------- next part --------------
sio0: type 8250
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, logging disabled
IPsec: Initialized Security Association Processing.
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s1a
da0 at ahc0 bus 0 target 0 lun 0
da0: <FUJITSU MAH3182MC 0113> Fixed Direct Access SCSI-4 device
da0: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged Queueing Enabled
da0: 17432MB (35701260 512 byte sectors: 255H 63S/T 2222C)
da1 at ahc0 bus 0 target 2 lun 0
da1: <FUJITSU MAN3184MC 0107> Fixed Direct Access SCSI-3 device
da1: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged Queueing Enabled
da1: 17522MB (35885448 512 byte sectors: 255H 63S/T 2233C)
md1: Malloc disk
pid 28555 (qmailadmin), uid 89: exited on signal 11
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0x485974e2
fault code = supervisor read, page not present
instruction pointer = 0x8:0xc01cbfe3
stack pointer = 0x10:0xc0311854
frame pointer = 0x10:0xc0311858
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = Idle
interrupt mask =
trap number = 12
panic: page fault
syncing disks... Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.7-RELEASE-p24 #4: Sat Jan 24 13:17:36 GMT 2004
root at thing.verysmall.org:/home/scratch/obj/home/scratch/src/sys/THING
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD Duron(TM)Processor (807.19-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x631 Stepping = 1
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!>
real memory = 536788992 (524208K bytes)
avail memory = 518430720 (506280K bytes)
Preloaded elf kernel "kernel" at 0xc03ca000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 10 entries at 0xc00f13a0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=1106 device=b099)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI model 5446 graphics accelerator> at 0.0 irq 11
ahc0: <Adaptec 29160 Ultra160 SCSI adapter> port 0xb800-0xb8ff mem 0xf6800000-0xf6800fff irq 11 at device 13.0 on pci0
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xb400-0xb43f mem 0xf5800000-0xf581ffff,0xf6000000-0xf6000fff irq 10 at device 16.0 on pci0
fxp0: Ethernet address 00:02:b3:be:6f:2e
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI to ISA bridge (vendor=1106 device=3074)> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8233 ATA100 controller> port 0xb000-0xb00f irq 0 at device 17.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xa800-0xa81f irq 10 at device 17.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xa400-0xa41f irq 10 at device 17.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xa000-0xa01f irq 10 at device 17.4 on pci0
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
orm0: <Option ROMs> at iomem 0xc0000-0xcffff,0xd8000-0xd97ff on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, logging disabled
IPsec: Initialized Security Association Processing.
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s1a
da0 at ahc0 bus 0 target 0 lun 0
da0: <FUJITSU MAH3182MC 0113> Fixed Direct Access SCSI-4 device
da0: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged Queueing Enabled
da0: 17432MB (35701260 512 byte sectors: 255H 63S/T 2222C)
da1 at ahc0 bus 0 target 2 lun 0
da1: <FUJITSU MAN3184MC 0107> Fixed Direct Access SCSI-3 device
da1: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged Queueing Enabled
da1: 17522MB (35885448 512 byte sectors: 255H 63S/T 2233C)
WARNING: / was not properly dismounted
md1: Malloc disk
-------------- next part --------------
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.38 2002/01/25 17:41:40 murray Exp $
machine i386
#cpu I386_CPU
#cpu I486_CPU
#cpu I586_CPU
cpu I686_CPU
ident THING
maxusers 0
#makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
#options MATH_EMULATE #Support for x87 emulation
options INET #InterNETworking
options INET6 #IPv6 communications protocols
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep this!]
options SOFTUPDATES #Enable FFS soft updates support
options UFS_DIRHASH #Improve performance on big directories
options MFS #Memory Filesystem
options MD_ROOT #MD is a potential root device
options NFS #Network Filesystem
options NFS_ROOT #NFS usable as root device, NFS required
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options CD9660_ROOT #CD-ROM usable as root, CD9660 required
options PROCFS #Process filesystem
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
options UCONSOLE #Allow users to grab the console
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options P1003_1B #Posix P1003_1B real-time extensions
options _KPOSIX_PRIORITY_SCHEDULING
options ICMP_BANDLIM #Rate limit bad replies
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options QUOTA
options IPFIREWALL
options IPDIVERT
options IPSEC #IP security
options IPSEC_ESP #IP security (crypto; define w/ IPSEC)
# To make an SMP kernel, the next two are needed
#options SMP # Symmetric MultiProcessor Kernel
#options APIC_IO # Symmetric (APIC) I/O
device isa
#device eisa
device pci
# Floppy drives
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
device fd1 at fdc0 drive 1
#
# If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
# don't use the above line for fdc0 but the following one:
#device fdc0
# ATA and ATAPI devices
device ata0 at isa? port IO_WD1 irq 14
device ata1 at isa? port IO_WD2 irq 15
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
#device atapifd # ATAPI floppy drives
#device atapist # ATAPI tape drives
options ATA_STATIC_ID #Static device numbering
# SCSI Controllers
#device ahb # EISA AHA1742 family
device ahc # AHA2940 and onboard AIC7xxx devices
#device amd # AMD 53C974 (Tekram DC-390(T))
#device isp # Qlogic family
#device ncr # NCR/Symbios Logic
#device sym # NCR/Symbios Logic (newer chipsets)
#options SYM_SETUP_LP_PROBE_MAP=0x40
# Allow ncr to attach legacy NCR devices when
# both sym and ncr are configured
#device adv0 at isa?
#device adw
#device bt0 at isa?
#device aha0 at isa?
#device aic0 at isa?
#device ncv # NCR 53C500
#device nsp # Workbit Ninja SCSI-3
#device stg # TMC 18C30/18C50
# SCSI peripherals
device scbus # SCSI bus (required)
device da # Direct Access (disks)
device sa # Sequential Access (tape etc)
device cd # CD
device pass # Passthrough device (direct SCSI access)
# RAID controllers interfaced to the SCSI subsystem
#device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
#device dpt # DPT Smartcache - See LINT for options!
#device mly # Mylex AcceleRAID/eXtremeRAID
# RAID controllers
#device aac # Adaptec FSA RAID, Dell PERC2/PERC3
#device ida # Compaq Smart RAID
#device amr # AMI MegaRAID
#device mlx # Mylex DAC960 family
#device twe # 3ware Escalade
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1 flags 0x1
device psm0 at atkbdc? irq 12
device vga0 at isa?
# splash screen/screen saver
pseudo-device splash
# syscons is the default console driver, resembling an SCO console
device sc0 at isa? flags 0x100
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device vt0 at isa?
#options XSERVER # support for X server on a vt console
#options FAT_CURSOR # start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options PCVT_SCANSET=2 # IBM keyboards are non-std
# Floating point support - do not disable.
device npx0 at nexus? port IO_NPX irq 13
# Power management support (see LINT for more options)
device apm0 at nexus? disable flags 0x20 # Advanced Power Management
# PCCARD (PCMCIA) support
#device card
#device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000
#device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000 disable
# Serial (COM) ports
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
device sio1 at isa? port IO_COM2 irq 3
device sio2 at isa? disable port IO_COM3 irq 5
device sio3 at isa? disable port IO_COM4 irq 9
# Parallel port
device ppc0 at isa? irq 7
device ppbus # Parallel port bus (required)
device lpt # Printer
#device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# PCI Ethernet NICs.
#device de # DEC/Intel DC21x4x (``Tulip'')
#device txp # 3Com 3cR990 (``Typhoon'')
#device vx # 3Com 3c590, 3c595 (``Vortex'')
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
#device dc # DEC/Intel 21143 and various workalikes
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
#device pcn # AMD Am79C97x PCI 10/100 NICs
#device rl # RealTek 8129/8139
#device sf # Adaptec AIC-6915 (``Starfire'')
#device sis # Silicon Integrated Systems SiS 900/SiS 7016
#device ste # Sundance ST201 (D-Link DFE-550TX)
#device tl # Texas Instruments ThunderLAN
#device tx # SMC EtherPower II (83c170 ``EPIC'')
#device vr # VIA Rhine, Rhine II
#device wb # Winbond W89C840F
#device wx # Intel Gigabit Ethernet Card (``Wiseman'')
#device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
#device bge # Broadcom BCM570x (``Tigon III'')
# ISA Ethernet NICs.
# 'device ed' requires 'device miibus'
#device ed0 at isa? port 0x280 irq 10 iomem 0xd8000
#device ex
#device ep
#device fe0 at isa? port 0x300
# Xircom Ethernet
#device xe
# PRISM I IEEE 802.11b wireless NIC.
#device awi
# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
# exists only as a PCMCIA device, so there is no ISA attachment needed
# and resources will always be dynamically assigned by the pccard code.
#device wi
# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
# mode (the factory default). If you set the switches on your ISA
# card for a manually chosen I/O address and IRQ, you must specify
# those parameters here.
#device an
# The probe order of these is presently determined by i386/isa/isa_compat.c.
#device ie0 at isa? port 0x300 irq 10 iomem 0xd0000
#device le0 at isa? port 0x300 irq 5 iomem 0xd0000
#device lnc0 at isa? port 0x280 irq 10 drq 0
#device cs0 at isa? port 0x300
#device sn0 at isa? port 0x300 irq 10
# Pseudo devices - the number indicates how many units to allocate.
pseudo-device loop # Network loopback
pseudo-device ether # Ethernet support
#pseudo-device sl 1 # Kernel SLIP
#pseudo-device ppp 1 # Kernel PPP
pseudo-device tun # Packet tunnel.
pseudo-device pty # Pseudo-ttys (telnet etc)
pseudo-device md # Memory "disks"
pseudo-device gif # IPv6 and IPv4 tunneling
pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device bpf #Berkeley packet filter
# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device usb # USB Bus (required)
device ugen # Generic
#device uhid # "Human Interface Devices"
#device ukbd # Keyboard
#device ulpt # Printer
#device umass # Disks/Mass storage - Requires scbus and da
#device ums # Mouse
#device uscanner # Scanners
#device urio # Diamond Rio MP3 Player
# USB Ethernet, requires mii
#device aue # ADMtek USB ethernet
#device cue # CATC USB ethernet
#device kue # Kawasaki LSI USB ethernet
More information about the freebsd-stable
mailing list