Kernel Compile Errors

Matt Emmerton matt at gsicomp.on.ca
Mon Aug 9 12:32:25 PDT 2004


Where did these two lines go? They are required:

device          atkbdc0 at isa? port IO_KBD
device          atkbd0  at atkbdc? irq 1 flags 0x1

Matt

----- Original Message ----- 
From: "Ryan" <bw2003 at shaw.ca>
To: <freebsd-stable at freebsd.org>
Sent: Monday, August 09, 2004 9:45 AM
Subject: Kernel Compile Errors


> bash-2.05b# make buildkernel KERNCONF=POTL
>
> --------------------------------------------------------------
> >>> Kernel build for POTL started on Mon Aug  9 09:07:24 EST 2004
> --------------------------------------------------------------
> ===> POTL
>
> ((((Skiping To The End))))
>
>
cc -c -O -pipe -march=pentiumpro -Wall -Wredundant-decls -Wnested-externs -W
strict-prototypes  -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual
  -fformat-extensions -ansi  -nostdinc -I- -I. -I/usr/src/sys -I/usr/src/sys
/../include -I/usr/src/sys/contrib/dev/acpica -I/usr/src/sys/contrib/ipfilte
r  -D_KERNEL -include opt_global.h  -mpreferred-stack-boundary=2  setdef1.c
> touch hack.c
> cc -shared -nostdlib hack.c -o hack.So
> rm -f hack.c
> sh /usr/src/sys/conf/newvers.sh POTL
>
cc -c -O -pipe -march=pentiumpro -Wall -Wredundant-decls -Wnested-externs -W
strict-prototypes  -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual
  -fformat-extensions -ansi  -nostdinc -I- -I. -I/usr/src/sys -I/usr/src/sys
/../include -I/usr/src/sys/contrib/dev/acpica -I/usr/src/sys/contrib/ipfilte
r  -D_KERNEL -include opt_global.h  -mpreferred-stack-boundary=2  vers.c
> linking kernel
> kbd.o: In function `kbd_register':
> kbd.o(.text+0x314): undefined reference to `kbddriver_set'
> kbd.o(.text+0x31b): undefined reference to `kbddriver_set'
> kbd.o: In function `kbd_get_switch':
> kbd.o(.text+0x429): undefined reference to `kbddriver_set'
> kbd.o(.text+0x42e): undefined reference to `kbddriver_set'
> kbd.o: In function `kbd_configure':
> kbd.o(.text+0x6b3): undefined reference to `kbddriver_set'
> kbd.o(.text+0x6b8): more undefined references to `kbddriver_set' follow
> *** Error code 1
>
> Stop in /usr/obj/usr/src/sys/POTL.
> *** Error code 1
>
> Stop in /usr/src.
> *** Error code 1
>
> Stop in /usr/src.
>
>
> --------------------------------------------------------------------------
------
>
> (((((Kernel Config))))
>
> machine         i386
> cpu             I686_CPU
> ident           POTL
> maxusers        0
>
> options         INET                    #InterNETworking
> options         FFS                     #Berkeley Fast Filesystem
> options         FFS_ROOT                #FFS usable as root device [keep
this!]
> options         SOFTUPDATES             #Enable FFS soft updates support
> options         UFS_DIRHASH             #Improve performance on big
directories
> options         MFS                     #Memory Filesystem
> options         MD_ROOT                 #MD is a potential root device
> options         CD9660                  #ISO 9660 Filesystem
> options         CD9660_ROOT             #CD-ROM usable as root, CD9660
required
> options         PROCFS                  #Process filesystem
> options         COMPAT_43               #Compatible with BSD 4.3 [KEEP
THIS!]
> options         SCSI_DELAY=15000        #Delay (in ms) before probing SCSI
> options         USERCONFIG              #boot -c editor
> options         VISUAL_USERCONFIG       #visual boot -c editor
> options         KTRACE                  #ktrace(1) support
> options         SYSVSHM                 #SYSV-style shared memory
> options         SYSVMSG                 #SYSV-style message queues
> options         SYSVSEM                 #SYSV-style semaphores
> options         P1003_1B                #Posix P1003_1B real-time
extensions
> options         _KPOSIX_PRIORITY_SCHEDULING
> options         ICMP_BANDLIM            #Rate limit bad replies
> options         KBD_INSTALL_CDEV        # install a CDEV entry in /dev
> options         AHC_REG_PRETTY_PRINT    # Print register bitfields in
debug
>                                         # output.  Adds ~128k to driver.
> options         AHD_REG_PRETTY_PRINT    # Print register bitfields in
debug
>                                         # output.  Adds ~215k to driver.
>
> device          ata
> device          atadisk                 # ATA disk drives
> device          atapicd                 # ATAPI CDROM drives
> device          atapifd                 # ATAPI floppy drives
> options         ATA_STATIC_ID           #Static device numbering
>
> device          stg             # TMC 18C30/18C50
> device          scbus           # SCSI bus (required)
> device          vga0    at isa?
> pseudo-device   splash
> device          sc0     at isa? flags 0x100
> device          agp             # support several AGP chipsets
> device          npx0    at nexus? port IO_NPX irq 13
> device          apm0    at nexus? disable flags 0x20 # Advanced Power
Management
> device          sio0    at isa? port IO_COM1 flags 0x10 irq 4
> device          sio1    at isa? port IO_COM2 irq 3
> device          miibus          # MII bus support
> device          vr              # VIA Rhine, Rhine II
> pseudo-device   loop            # Network loopback
> pseudo-device   ether           # Ethernet support
> pseudo-device   tun             # Packet tunnel.
> pseudo-device   pty             # Pseudo-ttys (telnet etc)
> pseudo-device   md              # Memory "disks"
> options         MAXDSIZ="(256*1024*1024)"
> options         MAXSSIZ="(256*1024*1024)"
> options         DFLDSIZ="(256*1024*1024)"
>
> options         IPFIREWALL              #firewall
> options         IPFIREWALL_VERBOSE      #enable logging to syslogd(8)
> options         IPFIREWALL_FORWARD      #enable transparent proxy support
> options         IPFIREWALL_VERBOSE_LIMIT=100    #limit verbosity
> options         IPFIREWALL_DEFAULT_TO_ACCEPT    #allow everything by
default
> options         IPFILTER                #ipfilter support
> options         IPFILTER_LOG            #ipfilter logging
> options         IPFILTER_DEFAULT_BLOCK  #block all packets by default
> options         MROUTING                # Multicast routing
> options         IPSTEALTH               #support for stealth forwarding
> _______________________________________________
> freebsd-stable at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org"
>



More information about the freebsd-stable mailing list