freebsd-stable Digest, Vol 57, Issue 3

[Julian Elischer]

AAARRRGGHHHHHHHHHH!!!! 
we have already branched 4.10

It is a pitty that you could not report this a couple of
weeks ago..

I will try send you some patches to try in the next week or so, but they
will not be in 4.10.

Thanks for the report...

I'll get back to you on this...

julian





> Date: Wed, 21 Apr 2004 13:13:21 +0200
> From: M.Santhoff at t-online.de (Marc Santhoff)
> Subject: USB device broken since big mfc
> To: "FreeBSD stable (Liste)" <stable at freebsd.org>
> Message-ID: <1082546001.255.16.camel at zaphod.das.netz>
> Content-Type: text/plain
> 
> > Hi!
> 
> Now that i find the time:
> 
> After the last big MFC for the USB code two devices are not (more)
> working:
> 
> 1. CompactFlash card adapter with Genesys-Chip
> 
> Worked a while ago (no old logs available) and now shows at plugging in
> 
> umass0: Genesys Logic USB Storage Device, rev 1.10/1.13, addr 2, SCSI
> over
> Bulk-Only
> umass0: Get Max Lun not supported (STALLED)
> umass0:1:0:-1: Attached to scbus1 as device 0
> 
> and on plugging out
> 
> umass0: at uhub0 port 2 (addr 2) disconnected
> ohci_freex: xfer=0xc2375900 not busy, 0x4f4e5155
> usb_insert_transfer: xfer=0xc28e3d00 not busy 0x46524545
> umass0: detached
> 
> usbdevs -v
> 
> Controller /dev/usb0:
> addr 1: full speed, self powered, config 1, OHCI root hub(0x0000),
> (0x10de)(0x0000), rev 1.00
>  port 1 powered
>  port 2 addr 2: full speed, power 96 mA, config 1, USB Storage
> Device(0x0700),
> Genesys Logic(0x05e3), rev 1.13
>  port 3 powered
> 
> 2. Sharkoon USB stick
> 
> This one is new after the code change
> 
> <in>
> umass0: USB Flash Disk, rev 2.00/2.00, addr 2, SCSI over Bulk-Only
> umass0:1:0:-1: Attached to scbus1 as device 0
> <out>
> umass0: at uhub0 port 2 (addr 2) disconnected
> umass0: detached
> </>
> 
> usbdevs -v
> 
> Controller /dev/usb0:
> addr 1: full speed, self powered, config 1, OHCI root hub(0x0000),
> (0x10de)(0x0000), rev 1.00
>  port 1 powered
>  port 2 addr 2: full speed, power 200 mA, config 1, Flash Disk(0x2168),
> USB(0x0ea0), rev 2.00
>  port 3 powered
> 
> Some info about the system:
> 
> ohci0: <OHCI (generic) USB controller> mem 0xea083000-0xea083fff irq 11
> at
> device 2.1 on pci0
> usb0: OHCI version 1.0, legacy support
> usb0: SMM does not respond, resetting
> usb0: <OHCI (generic) USB controller> on ohci0
> 
>