Recent -STABLE panics during boot (100% reproducable)
Mike Tancsa
mike at sentex.net
Fri Sep 5 06:47:45 PDT 2003
Hi,
There was a recent thread about this as well as a work around /
patch posted by one of the developer. See the message
Date: Mon, 1 Sep 2003 16:13:35 -0600
From: "Kenneth D. Merry" <ken at kdm.org>
To: stable at freebsd.org
Message-ID: <20030901221335.GA66968 at panzer.kdm.org>
Mime-Version: 1.0
Subject: testers needed for CAM INVARIANTS fix
---Mike
At 05:38 PM 05/09/2003 +0400, Dmitry Sivachenko wrote:
>Hello!
>
>Using very recent -STABLE we encounter the following panic during boot:
>
><snip>
>ipfw2 initialized, divert enabled, rule-based forwarding enabled, default
>to deny, logging limited to 100 packets/entry by default
>Waiting 5 seconds for SCSI devices to settle
>SMP: AP CPU #1 Launched!
>panic: malloc(M_WAITOK) in interrupt context
>mp_lock = 00000001; cpuid = 0; lapic.id = 00000000
>boot() called on cpu#0
>
>syncing disks...
>
>
>This is 100% reproducable on two different machines.
>I am providing our kernel config file below. If we remove two
>INVARIANTS-related options, the panic goes away.
>
>
>machine i386
>cpu I586_CPU
>cpu I686_CPU
>ident GENERIC
>maxusers 0
>
>makeoptions DEBUG=-g #Build kernel with gdb(1) debug
>symbols
>options INVARIANTS
>options INVARIANT_SUPPORT
>
>options INET #InterNETworking
>options FFS #Berkeley Fast Filesystem
>options FFS_ROOT #FFS usable as root device [keep
>this!]
>options SOFTUPDATES #Enable FFS soft updates support
>
>options UFS_DIRHASH
>
>options PROCFS #Process filesystem
>options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
>options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI
>options UCONSOLE #Allow users to grab the console
>options USERCONFIG #boot -c editor
>options VISUAL_USERCONFIG #visual boot -c editor
>
>options NMBCLUSTERS=12000
>
>options SMP # Symmetric MultiProcessor Kernel
>options APIC_IO # Symmetric (APIC) I/O
>
>options P1003_1B
>options _KPOSIX_PRIORITY_SCHEDULING
>options _KPOSIX_VERSION=199309L
>
>options HZ=100
>
>device isa
>device pci
>
>device fdc0 at isa? port IO_FD1 irq 6 drq 2
>device fd0 at fdc0 drive 0
>
>device ahc0 # AHA2940 and onboard AIC7xxx devices
>device ahc1 # AHA2940 and onboard AIC7xxx devices
>
>device scbus # SCSI bus (required)
>device da # Direct Access (disks)
>device scbus0 at ahc0 bus 0 # Single bus device
>device cd # CD
>
>device pass
>
>device atkbdc0 at isa? port IO_KBD
>device atkbd0 at atkbdc? irq 1 flags 0x1
>device psm0 at atkbdc? irq 12
>
>device vga0 at isa?
>
>device sc0 at isa? flags 0x100
>
>device npx0 at nexus? port IO_NPX irq 13
>
>device sio0 at isa? port IO_COM1 flags 0x10 irq 4
>device sio1 at isa? port IO_COM2 irq 3
>
>device ppc0 at isa? irq 7
>device ppbus # Parallel port bus (required)
>
>device miibus # MII bus support
>device fxp # Intel EtherExpress PRO/100B (82557, 82558)
>
>pseudo-device loop # Network loopback
>pseudo-device ether # Ethernet support
>pseudo-device pty # Pseudo-ttys (telnet etc)
>pseudo-device vn
>
>pseudo-device bpf 2 #Berkeley packet filter
>
>device smbus # Bus support, required for smb below.
>device intpm
>device ichsmb
>device smb
>
>options ICMP_BANDLIM
>options IPFIREWALL #firewall
>options IPFIREWALL_VERBOSE #enable logging to syslogd(8)
>options IPFIREWALL_FORWARD #enable transparent proxy support
>options IPFIREWALL_VERBOSE_LIMIT=100 #limit verbosity
>options IPDIVERT #divert sockets
>options IPFW2
>
>options MAXDSIZ="(1024*1024*1024)"
>options DFLDSIZ="(1024*1024*1024)"
>
>options INCLUDE_CONFIG_FILE
>
>
>Full boot output:
>
>Copyright (c) 1992-2003 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
>FreeBSD 4.9-PRERELEASE #0: Fri Sep 5 16:55:35 MSD 2003
> andy at west.demos.su:/mnt/obj/usr/src/sys/MX1
>Timecounter "i8254" frequency 1193182 Hz
>CPU: Intel(R) Pentium(R) III CPU family 1266MHz (1266.07-MHz
>686-class CPU)
> Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1
>
>Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
>real memory = 1073676288 (1048512K bytes)
>avail memory = 1042145280 (1017720K bytes)
>Programming 16 pins in IOAPIC #0
>IOAPIC #0 intpin 2 -> irq 0
>Programming 16 pins in IOAPIC #1
>FreeBSD/SMP: Multiprocessor motherboard: 2 CPUs
> cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
> cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
> io0 (APIC): apic id: 4, version: 0x000f0011, at 0xfec00000
> io1 (APIC): apic id: 5, version: 0x000f0011, at 0xfec01000
>Preloaded elf kernel "kernel" at 0xc02db000.
>Pentium Pro MTRR support enabled
>Using $PIR table, 9 entries at 0xc00f5250
>npx0: <math processor> on motherboard
>npx0: INT 16 interface
>pcib0: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
>IOAPIC #1 intpin 4 -> irq 2
>IOAPIC #1 intpin 6 -> irq 5
>IOAPIC #1 intpin 15 -> irq 9
>pci0: <PCI bus> on pcib0
>pci0: <ATI Mach64-GR graphics accelerator> at 3.0 irq 2
>fxp0: <Intel 82559 Pro/100 Ethernet> port 0xc000-0xc03f mem
>0xfe300000-0xfe3fffff,0xfe6fd000-0xfe6fdfff irq 5 at device 4.0 on pci0
>fxp0: Ethernet address 00:30:48:23:9e:df
>inphy0: <i82555 10/100 media interface> on miibus0
>inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>fxp1: <Intel 82559 Pro/100 Ethernet> port 0xc400-0xc43f mem
>0xfe500000-0xfe5fffff,0xfe6fe000-0xfe6fefff irq 9 at device 6.0 on pci0
>fxp1: Ethernet address 00:30:48:23:9e:e0
>inphy1: <i82555 10/100 media interface> on miibus1
>inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0
>isa0: <ISA bus> on isab0
>pci0: <Unknown PCI ATA controller> at 15.1
>pci0: <OHCI USB controller> at 15.2 irq 0
>pcib1: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
>IOAPIC #1 intpin 8 -> irq 10
>IOAPIC #1 intpin 12 -> irq 11
>pci1: <PCI bus> on pcib1
>fxp2: <Intel 82558 Pro/100 Ethernet> port 0xe400-0xe41f mem
>0xfea00000-0xfeafffff,0xfbdff000-0xfbdfffff irq 10 at device 1.0 on pci1
>fxp2: Ethernet address 00:50:8b:02:2c:80
>inphy2: <i82555 10/100 media interface> on miibus2
>inphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>ahc0: <Adaptec aic7892 Ultra160 SCSI adapter> port 0xe800-0xe8ff mem
>0xfebff000-0xfebfffff irq 11 at device 3.0 on pci1
>aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
>orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
>pmtimer0 on isa0
>fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
>fdc0: FIFO enabled, 8 bytes threshold
>fd0: <1440-KB 3.5" drive> on fdc0 drive 0
>atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
>atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
>psm0: <PS/2 Mouse> irq 12 on atkbdc0
>psm0: model NetMouse/NetScroll Optical, device ID 0
>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
>sc0: <System console> at flags 0x100 on isa0
>sc0: VGA <16 virtual consoles, flags=0x300>
>sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
>sio0: type 16550A
>sio1 at port 0x2f8-0x2ff irq 3 on isa0
>sio1: type 16550A
>ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
>ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
>ppc0: FIFO with 16/16/8 bytes threshold
>APIC_IO: Testing 8254 interrupt delivery
>APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin 2
>APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
>ipfw2 initialized, divert enabled, rule-based forwarding enabled, default
>to deny, logging limited to 100 packets/entry by default
>Waiting 5 seconds for SCSI devices to settle
>SMP: AP CPU #1 Launched!
>panic: malloc(M_WAITOK) in interrupt context
>mp_lock = 00000001; cpuid = 0; lapic.id = 00000000
>boot() called on cpu#0
>
>syncing disks...
>done
>Uptime: 8s
>Automatic reboot in 15 seconds - press a key on the console to abort
>--> Press a key on the console to reboot,
>--> or switch off the system now.
>Rebooting...
>cpu_reset called on cpu#0
>cpu_reset: Stopping other CPUs
>_______________________________________________
>freebsd-stable at freebsd.org mailing list
>http://lists.freebsd.org/mailman/listinfo/freebsd-stable
>To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org"
More information about the freebsd-stable
mailing list