AC-97 problem between RELENG_4_8 and RELENG_4
Marc Ramirez
marc.ramirez at bluecirclesoft.com
Wed Oct 1 12:51:50 PDT 2003
Sorry if this is a known problem...
I've been tracking RELENG_4 on my Toshiba laptop for a while now; a
couple of months ago (not sure when) my sound stopped working. More
specifically, when it gets to the pcm probe, the boot hangs. I
dual-boot with WinXP and figured that somehow XP had hosed the
hardware, so I wrote it off.
Today, I made world with RELENG_4_8, and voila, my sound's back.
Kernel config is the same; boots fine with RELENG_4_8, hangs with
RELENG_4. Laptop is a Toshiba 1415-S105.
I'm attaching the output of dmesg for the working kernel, the kernel
config file (LAPTOP), and the output of pciconf -vl.
I'll try to get better info on exactly what the output is when 4.9
hangs.
How can I help?
--
Marc Ramirez
Blue Circle Software Corporation
513-688-1070 (main)
513-382-1270 (direct)
http://www.bluecirclesoft.com
http://www.mrami.com (personal)
-------------- next part --------------
install -C -s -o root -g wheel -m 555 rwhod /usr/sbin
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped
syncing disks... 4
done
Uptime: 8m17s
Rebooting...
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.8-RELEASE-p10 #0: Wed Oct 1 12:55:26 EDT 2003
mrami at s184.ghostmrami.com:/usr/obj/usr/src/sys/LAPTOP
Timecounter "i8254" frequency 1193182 Hz
CPU: Mobile Intel(R) Celeron(R) CPU 1.60GHz (1594.84-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory = 268238848 (261952K bytes)
avail memory = 256835584 (250816K bytes)
Preloaded elf kernel "kernel" at 0xc0418000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 8 entries at 0xc00f01a0
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82845 Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82845 host to AGP bridge> mem 0xf0000000-0xf7ffffff at device 0.0 on pci0
pcib1: <Intel 82845 PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia model 0175 graphics accelerator> at 0.0 irq 10
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0xefe0-0xefff irq 11 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0xef80-0xef9f irq 11 at device 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ums0: vendor 0x1241 product 0x1122, rev 1.00/1.00, addr 2, iclass 3/1
ums0: 5 buttons and Z dir.
pcib2: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
fxp0: <Intel Pro/100 Ethernet> port 0xdf40-0xdf7f mem 0xfceff000-0xfcefffff irq 11 at device 8.0 on pci2
fxp0: Ethernet address 00:08:0d:05:70:0b
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci_cfgintr_linked: linked (60) to hard-routed irq 11
pci_cfgintr: 2:11 INTA routed to irq 11
pcic0: <Toshiba ToPIC100 PCI-CardBus Bridge> irq 11 at device 11.0 on pci2
pcic0: PCI Memory allocated: 0x88000000
pccard0: <PC Card 16-bit bus (classic)> on pcic0
pci_cfgintr_linked: linked (61) to hard-routed irq 11
pci_cfgintr: 2:11 INTB routed to irq 11
pcic1: <Toshiba ToPIC100 PCI-CardBus Bridge> irq 11 at device 11.1 on pci2
pcic1: PCI Memory allocated: 0x88001000
pccard1: <PC Card 16-bit bus (classic)> on pcic1
isab0: <PCI to ISA bridge (vendor=8086 device=248c)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port 0xcfa0-0xcfaf,0xcfe4-0xcfe7,0xcfe8-0xcfef,0xcff4-0xcff7,0xcff8-0xcfff irq 11 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pcm0: <Intel 82801CA (ICH3)> port 0xcdc0-0xcdff,0xce00-0xceff irq 11 at device 31.5 on pci0
pcm0: <unknown ac97 codec> (id=0x594d4803)
pci0: <unknown card> (vendor=0x8086, dev=0x2486) at 31.6 irq 11
isa0: too many memory ranges
isa0: too many ports
orm0: <Option ROMs> at iomem 0xc0000-0xcffff,0xe0000-0xeffff on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/15 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: <PNP0c01> can't assign resources
unknown: <PNP0000> can't assign resources
unknown: <PNP0303> can't assign resources
unknown: <PNP0f13> can't assign resources
unknown: <PNP0401> can't assign resources
unknown: <PNP0e03> can't assign resources
ad0: 19077MB <TOSHIBA MK2018GAS> [38760/16/63] at ata0-master UDMA100
acd0: CD-RW <DW-224E> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s2a
cd0 at ata1 bus 0 target 0 lun 0
cd0: <TEAC DW-224E 7.0A> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
-------------- next part --------------
#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ./LINT configuration file. If you are
# in doubt as to the purpose or necessity of a line, check first in LINT.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.53 2003/03/25 23:33:44 jhb Exp $
machine i386
cpu I386_CPU
cpu I486_CPU
cpu I586_CPU
cpu I686_CPU
ident LAPTOP
maxusers 0
#makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
options MATH_EMULATE #Support for x87 emulation
options INET #InterNETworking
options INET6 #IPv6 communications protocols
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep this!]
options SOFTUPDATES #Enable FFS soft updates support
options UFS_DIRHASH #Improve performance on big directories
options MFS #Memory Filesystem
options MD_ROOT #MD is a potential root device
options NFS #Network Filesystem
options NFS_ROOT #NFS usable as root device, NFS required
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options CD9660_ROOT #CD-ROM usable as root, CD9660 required
options PROCFS #Process filesystem
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
options UCONSOLE #Allow users to grab the console
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options P1003_1B #Posix P1003_1B real-time extensions
options _KPOSIX_PRIORITY_SCHEDULING
options ICMP_BANDLIM #Rate limit bad replies
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
#options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~128k to driver.
#options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~215k to driver.
options USER_LDT
#options DDB
# To make an SMP kernel, the next two are needed
#options SMP # Symmetric MultiProcessor Kernel
#options APIC_IO # Symmetric (APIC) I/O
# To support HyperThreading, HTT is needed in addition to SMP and APIC_IO
#options HTT # HyperThreading Technology
device isa
device eisa
device pci
# Floppy drives
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
device fd1 at fdc0 drive 1
#
# If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
# don't use the above line for fdc0 but the following one:
#device fdc0
# ATA and ATAPI devices
device ata0 at isa? port IO_WD1 irq 14
device ata1 at isa? port IO_WD2 irq 15
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
device atapist # ATAPI tape drives
options ATA_STATIC_ID #Static device numbering
# SCSI Controllers
#device ahb # EISA AHA1742 family
#device ahc # AHA2940 and onboard AIC7xxx devices
#device ahd # AHA39320/29320 and onboard AIC79xx devices
#device amd # AMD 53C974 (Tekram DC-390(T))
#device isp # Qlogic family
#device mpt # LSI-Logic MPT/Fusion
#device ncr # NCR/Symbios Logic
#device sym # NCR/Symbios Logic (newer chipsets)
#options SYM_SETUP_LP_PROBE_MAP=0x40
# Allow ncr to attach legacy NCR devices when
# both sym and ncr are configured
#device adv0 at isa?
#device adw
#device bt0 at isa?
#device aha0 at isa?
#device aic0 at isa?
#device ncv # NCR 53C500
#device nsp # Workbit Ninja SCSI-3
#device stg # TMC 18C30/18C50
# SCSI peripherals
device scbus # SCSI bus (required)
device da # Direct Access (disks)
device sa # Sequential Access (tape etc)
device cd # CD
device pass # Passthrough device (direct SCSI access)
device atapicam
# RAID controllers interfaced to the SCSI subsystem
device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
#device dpt # DPT Smartcache - See LINT for options!
#device iir # Intel Integrated RAID
#device mly # Mylex AcceleRAID/eXtremeRAID
#device ciss # Compaq SmartRAID 5* series
# RAID controllers
#device aac # Adaptec FSA RAID, Dell PERC2/PERC3
#device aacp # SCSI passthrough for aac (requires CAM)
#device ida # Compaq Smart RAID
#device amr # AMI MegaRAID
#device mlx # Mylex DAC960 family
#device twe # 3ware Escalade
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1 flags 0x1
device psm0 at atkbdc? irq 12
device vga0 at isa?
# splash screen/screen saver
pseudo-device splash
# syscons is the default console driver, resembling an SCO console
device sc0 at isa? flags 0x100
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device vt0 at isa?
#options XSERVER # support for X server on a vt console
#options FAT_CURSOR # start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options PCVT_SCANSET=2 # IBM keyboards are non-std
device agp # support several AGP chipsets
# Floating point support - do not disable.
device npx0 at nexus? port IO_NPX irq 13
# Power management support (see LINT for more options)
device apm0 at nexus? flags 0x20 # Advanced Power Management
# PCCARD (PCMCIA) support
device card
device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000
device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000 disable
# Serial (COM) ports
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
#device sio1 at isa? port IO_COM2 irq 3
#device sio2 at isa? disable port IO_COM3 irq 5
#device sio3 at isa? disable port IO_COM4 irq 9
# Parallel port
device ppc0 at isa? irq 7
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# PCI Ethernet NICs.
#device de # DEC/Intel DC21x4x (``Tulip'')
#device em # Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'')
#device txp # 3Com 3cR990 (``Typhoon'')
#device vx # 3Com 3c590, 3c595 (``Vortex'')
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
#device dc # DEC/Intel 21143 and various workalikes
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
#device pcn # AMD Am79C97x PCI 10/100 NICs
#device rl # RealTek 8129/8139
#device sf # Adaptec AIC-6915 (``Starfire'')
#device sis # Silicon Integrated Systems SiS 900/SiS 7016
#device ste # Sundance ST201 (D-Link DFE-550TX)
#device tl # Texas Instruments ThunderLAN
#device tx # SMC EtherPower II (83c170 ``EPIC'')
#device vr # VIA Rhine, Rhine II
#device wb # Winbond W89C840F
#device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
#device bge # Broadcom BCM570x (``Tigon III'')
# ISA Ethernet NICs.
# 'device ed' requires 'device miibus'
#device ed0 at isa? disable port 0x280 irq 10 iomem 0xd8000
#device ex
#device ep
#device fe0 at isa? disable port 0x300
# Xircom Ethernet
#device xe
# PRISM I IEEE 802.11b wireless NIC.
#device awi
# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
# exists only as a PCMCIA device, so there is no ISA attachment needed
# and resources will always be dynamically assigned by the pccard code.
device wi
# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
# mode (the factory default). If you set the switches on your ISA
# card for a manually chosen I/O address and IRQ, you must specify
# those parameters here.
#device an
# The probe order of these is presently determined by i386/isa/isa_compat.c.
#device ie0 at isa? disable port 0x300 irq 10 iomem 0xd0000
#device le0 at isa? disable port 0x300 irq 5 iomem 0xd0000
#device lnc0 at isa? disable port 0x280 irq 10 drq 0
#device cs0 at isa? disable port 0x300
#device sn0 at isa? disable port 0x300 irq 10
# Pseudo devices - the number indicates how many units to allocate.
pseudo-device loop # Network loopback
pseudo-device ether # Ethernet support
pseudo-device sl 1 # Kernel SLIP
pseudo-device ppp 1 # Kernel PPP
pseudo-device tun # Packet tunnel.
pseudo-device pty # Pseudo-ttys (telnet etc)
pseudo-device md # Memory "disks"
pseudo-device gif # IPv6 and IPv4 tunneling
pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device bpf #Berkeley packet filter
# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device usb # USB Bus (required)
device ugen # Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
device uscanner # Scanners
device urio # Diamond Rio MP3 Player
# USB Ethernet, requires mii
device aue # ADMtek USB ethernet
device cue # CATC USB ethernet
device kue # Kawasaki LSI USB ethernet
device pcm
options PNPBIOS
# FireWire support
device firewire # FireWire bus code
device sbp # SCSI over FireWire (Requires scbus and da)
device fwe # Ethernet over FireWire (non-standard!)
-------------- next part --------------
agp0 at pci0:0:0: class=0x060000 card=0x00011179 chip=0x1a308086 rev=0x05 hdr=0x00
vendor = 'Intel Corporation'
device = '82845/E/MP/MZ Brookdale CPU to I/O Bridge'
class = bridge
subclass = HOST-PCI
pcib1 at pci0:1:0: class=0x060400 card=0x00000000 chip=0x1a318086 rev=0x05 hdr=0x01
vendor = 'Intel Corporation'
device = '82845/E/MP/MZ Brookdale CPU to AGP Bridge'
class = bridge
subclass = PCI-PCI
uhci0 at pci0:29:0: class=0x0c0300 card=0x00011179 chip=0x24828086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801CA/CAM (ICH3-S/ICH3-M) USB Controller #1'
class = serial bus
subclass = USB
uhci1 at pci0:29:1: class=0x0c0300 card=0x00011179 chip=0x24848086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801CA/CAM (ICH3-S/ICH3-M) USB Controller #2'
class = serial bus
subclass = USB
pcib2 at pci0:30:0: class=0x060400 card=0x00000000 chip=0x24488086 rev=0x42 hdr=0x01
vendor = 'Intel Corporation'
device = '82801BAM/CAM (ICH2/3) PCI to I/O Hub Bridge (2448)'
class = bridge
subclass = PCI-PCI
isab0 at pci0:31:0: class=0x060100 card=0x00000000 chip=0x248c8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801CAM LPC Interface or ISA bridge: see Notes'
class = bridge
subclass = PCI-ISA
atapci0 at pci0:31:1: class=0x01018a card=0x00011179 chip=0x248a8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801CAM (ICH3-M) UltraATA/100 EIDE Controller'
class = mass storage
subclass = ATA
pcm0 at pci0:31:5: class=0x040100 card=0x00011179 chip=0x24858086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801CA/CAM (ICH3-S/ICH3-M) AC'97 Audio Controller'
class = multimedia
subclass = audio
none0 at pci0:31:6: class=0x070300 card=0x00011179 chip=0x24868086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801CA/CAM (ICH3-S/ICH3-M) AC'97 Modem Controller'
class = simple comms
none1 at pci1:0:0: class=0x030000 card=0x00011179 chip=0x017510de rev=0xa3 hdr=0x00
vendor = 'NVIDIA Corporation'
device = 'NV17M GeForce4 420 Go'
class = display
subclass = VGA
fxp0 at pci2:8:0: class=0x020000 card=0x00011179 chip=0x10318086 rev=0x42 hdr=0x00
vendor = 'Intel Corporation'
device = '82801CAM (ICH3) PRO/100 VE (LOM) Network Connection'
class = network
subclass = ethernet
pcic0 at pci2:11:0: class=0x060700 card=0x00011179 chip=0x06171179 rev=0x32 hdr=0x02
vendor = 'Toshiba America Information Systems'
device = 'ToPIC100 PCI to CardBus Bridge with ZV support'
class = bridge
subclass = PCI-CardBus
pcic1 at pci2:11:1: class=0x060700 card=0x00011179 chip=0x06171179 rev=0x32 hdr=0x02
vendor = 'Toshiba America Information Systems'
device = 'ToPIC100 PCI to CardBus Bridge with ZV support'
class = bridge
subclass = PCI-CardBus
More information about the freebsd-stable
mailing list