Broadcom BCM5703X causing reboot? 4.8-RC2

[David Malone]

On Fri, Mar 28, 2003 at 12:23:48PM -0800, Jeff Behl wrote:
> i've had two reboots in the last 30 mins on a fairly heavly loaded web
> server (apache).  the following immediately precedes both reboots (no
> more messages after this):
> 
> 
> Mar 28 19:15:29 blade7-bc2 /kernel: NMI ISA 24, EISA 0
> Mar 28 19:15:29 blade7-bc2 /kernel: Mar 28 19:15:29 blade7-bc2 /kernel:
> NMI ISA 24, EISA 0
> Mar 28 19:15:37 blade7-bc2 /kernel: bge1: watchdog timeout -- resetting
> Mar 28 19:15:38 blade7-bc2 /kernel: bge1: gigabit link up

We have similar problems with NMIs on our Dell 2550s with bge cards,
and have ended up using the fxp cards in them instead. These boards
are pretty old, so I'd sort of come to the conclusion that we'd got
an early bad revision of them 'cos other people seem to be using them
without any problem.

	David.

bge0: <Broadcom BCM5700 Gigabit Ethernet, ASIC rev. 0x7100> mem 0xfeb00000-0xfeb0ffff irq 11 at device 8.0 on pci1
bge0: Ethernet address: 00:06:5b:05:18:28