Via EPIA Mini-ITX motherboard

[Charles Sprickman]

On Mon, 9 Jun 2003, Chuck Swiger wrote:

> fwohci0: <VIA VT6306> port 0xd000-0xd07f mem 0xea000000-0xea0007ff irq 10 at dev
> ice 13.0 on pci0
> fwohci0: OHCI version 1.0 (ROM=1)
> fwohci0: No. of Isochronous channel is 4.
> fwohci0: EUI64 00:40:63:00:00:02:9f:f6
> fwohci0: Phy 1394a available S400, 2 ports.
> fwohci0: Link S400, max_rec 2048 bytes.
> firewire0: <IEEE1394(FireWire) bus> on fwohci0

While I'm not running that motherboard, my dmesg for a $15 Via firewire
card looks to be the same:

fwohci0: <VIA VT6306> port 0xe400-0xe47f mem 0xef000000-0xef0007ff irq 15
at dev
ice 20.0 on pci0
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channel is 8.
fwohci0: EUI64 00:11:06:00:00:00:36:8f
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
sbp0: <SBP2/SCSI over firewire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc1, gen=1, CYCLEMASTER mode
firewire0: 2 nodes, maxhop <= 1, cable IRM = 1 (me)

I use both a hard drive (w/an Oxford 911 chipset) and a CD burner with the
same IDE bridge.  Both work very well except for the occasional lockup if
I get too impatient and issue a few "fwcontrol reset" commands.

Just another datapoint.  4-stable as of about a month ago.

Charles

> -Chuck
>
> _______________________________________________
> freebsd-stable at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org"
>