ASUS P4BGL-MX hangs
Dmitry Morozovsky
woozle at woozle.net
Mon Jul 28 09:13:40 PDT 2003
Hi there,
sorry for rather long mail. Two verbose dmesgs and `pciconf -vl` outputs
attached.
trying to set up new machine based on ASUS P4BGL-MX motherboard, I'd
encountered hangs after detecting pcib1 (ICH2). MB has rl 8100 ethernet chip
onboard.
This is for 4.8-R; however, machine hangs in very similar way also with 4.4-R
and 5.1-R.
Matrix of hangs:
Onboard Ether External Ether Result
------------------------------------------------------
enabled none hang
disabled none ok
enabled rl hang
disabled rl hang
enabled fxp hang
disabled fxp hang
I'd trimmed kernel to the smallest set of devices. Hangs happen even when no
ethernet drivers exist in kernel, neither compiled in nor module-loaded.
In the second case (rather useless, you see) I can log in via comconsole and
get pciconf -vl (also attached)
Any thoughts? Thank you in advance.
Sincerely,
D.Marck [DM5020, MCK-RIPE, DM3-RIPN]
------------------------------------------------------------------------
*** Dmitry Morozovsky --- D.Marck --- Wild Woozle --- marck at rinet.ru ***
------------------------------------------------------------------------
-------------- next part --------------
ok boot -sv
SMAP type=01 base=00000000 00000000 len=00000000 0009fc00
SMAP type=02 base=00000000 0009fc00 len=00000000 00000400
SMAP type=02 base=00000000 000f0000 len=00000000 00010000
SMAP type=01 base=00000000 00100000 len=00000000 1fdfa000
SMAP type=03 base=00000000 1fefa000 len=00000000 00003000
SMAP type=04 base=00000000 1fefd000 len=00000000 00001000
SMAP type=02 base=00000000 fec00000 len=00000000 00001000
SMAP type=02 base=00000000 fee00000 len=00000000 00001000
SMAP type=02 base=00000000 1fefe000 len=00000000 00002000
SMAP type=02 base=00000000 ffff0000 len=00000000 00010000
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.8-RELEASE #0: Mon Jul 28 19:35:09 MSD 2003
root at whale.rinet.ru:/usr/src/sys/compile/mini
Calibrating clock(s) ... TSC clock: 1816175120 Hz, i8254 clock: 1193184 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 1816180228 Hz
CPU: Intel(R) Celeron(R) CPU 1.80GHz (1816.18-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf13 Stepping = 3
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory = 535797760 (523240K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x0029b000 - 0x1fef1fff, 533032960 bytes (130135 pages)
avail memory = 518889472 (506728K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f23a0
bios32: Entry = 0xf1d60 (c00f1d60) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0x1d90
pnpbios: Found PnP BIOS data at 0xc00f9060
pnpbios: Entry = f0000:9090 Rev = 1.0
pnpbios: OEM ID cd041
Other BIOS signatures found:
ACPI: 000f5150
Preloaded elf kernel "kernel" at 0xc0274000.
Pentium Pro MTRR support enabled
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000090
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=25608086)
Using $PIR table, 7 entries at 0xc00f2300
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x2560, revid=0x03
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base f0000000, size 27
found-> vendor=0x8086, dev=0x2562, revid=0x03
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base e8000000, size 27
map[14]: type 1, range 32, base e6800000, size 19
found-> vendor=0x8086, dev=0x244e, revid=0x82
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=2 secondarybus=2
found-> vendor=0x8086, dev=0x24c0, revid=0x02
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x24cb, revid=0x02
class=01-01-8a, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=12
map[10]: type 1, range 32, base 00000000, size 3
map[14]: type 1, range 32, base 00000000, size 2
map[18]: type 1, range 32, base 00000000, size 3
map[1c]: type 1, range 32, base 00000000, size 2
map[20]: type 1, range 32, base 0000f000, size 4
pci0: <PCI bus> on pcib0
pci0: <Intel model 2562 VGA-compatible display device> (vendor=0x8086, dev=0x2562) at 2.0 irq 11
pcib1: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
<<< hang here >>>
-------------- next part --------------
ok boot -sv
SMAP type=01 base=00000000 00000000 len=00000000 0009fc00
SMAP type=02 base=00000000 0009fc00 len=00000000 00000400
SMAP type=02 base=00000000 000f0000 len=00000000 00010000
SMAP type=01 base=00000000 00100000 len=00000000 1fdfa000
SMAP type=03 base=00000000 1fefa000 len=00000000 00003000
SMAP type=04 base=00000000 1fefd000 len=00000000 00001000
SMAP type=02 base=00000000 fec00000 len=00000000 00001000
SMAP type=02 base=00000000 fee00000 len=00000000 00001000
SMAP type=02 base=00000000 1fefe000 len=00000000 00002000
SMAP type=02 base=00000000 ffff0000 len=00000000 00010000
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.8-RELEASE #0: Mon Jul 28 19:35:09 MSD 2003
root at whale.rinet.ru:/usr/src/sys/compile/mini
Calibrating clock(s) ... TSC clock: 1816177620 Hz, i8254 clock: 1193185 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 1816180136 Hz
CPU: Intel(R) Celeron(R) CPU 1.80GHz (1816.18-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf13 Stepping = 3
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory = 535797760 (523240K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x0029b000 - 0x1fef1fff, 533032960 bytes (130135 pages)
avail memory = 518889472 (506728K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f23a0
bios32: Entry = 0xf1d60 (c00f1d60) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0x1d90
pnpbios: Found PnP BIOS data at 0xc00f9060
pnpbios: Entry = f0000:9090 Rev = 1.0
pnpbios: OEM ID cd041
Other BIOS signatures found:
ACPI: 000f5150
Preloaded elf kernel "kernel" at 0xc0274000.
Pentium Pro MTRR support enabled
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000090
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=25608086)
Using $PIR table, 7 entries at 0xc00f2300
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x2560, revid=0x03
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base f0000000, size 27
found-> vendor=0x8086, dev=0x2562, revid=0x03
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base e8000000, size 27
map[14]: type 1, range 32, base e7800000, size 19
found-> vendor=0x8086, dev=0x244e, revid=0x82
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=2 secondarybus=2
found-> vendor=0x8086, dev=0x24c0, revid=0x02
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x24cb, revid=0x02
class=01-01-8a, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base 00000000, size 3
map[14]: type 1, range 32, base 00000000, size 2
map[18]: type 1, range 32, base 00000000, size 3
map[1c]: type 1, range 32, base 00000000, size 2
map[20]: type 1, range 32, base 0000f000, size 4
pci0: <PCI bus> on pcib0
pci0: <Intel model 2562 VGA-compatible display device> (vendor=0x8086, dev=0x2562) at 2.0 irq 11
pcib1: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib1
isab0: <PCI to ISA bridge (vendor=8086 device=24c0)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 ATA100 controller> port 0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0x7 irq 10 at device 31.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xf000
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xf008
ata1: mask=03 ostat0=50 ostat2=00
ata1-master: ATAPI 14 eb
ata1-slave: ATAPI 00 00
ata1: mask=03 stat0=00 stat1=00
ata1: devices=04
ata1: at 0x170 irq 15 on atapci0
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xc0000-0xcafff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x1d0000
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: lo0 attached
ad0: success setting UDMA5 on Intel chip
Creating DISK ad0
ar: FreeBSD check1 failed
ad0: <WDC WD1600BB-00DAA3/75.13B75> ATA-6 disk at ata0-master
ad0: 152627MB (312581808 sectors), 310101 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
ad0: piomode=4 dmamode=2 udmamode=5 cblid=1
Mounting root from ufs:/dev/ad0s1a
ad0s1: type 0xa5, start 0, end = 312581807, size 312581808 : OK
start_init: trying /sbin/init
-------------- next part --------------
chip0 at pci0:0:0: class=0x060000 card=0x80941043 chip=0x25608086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82845G/GL/GV/GE/PE DRAM Controller / Host-Hub I/F Bridge'
class = bridge
subclass = HOST-PCI
none0 at pci0:2:0: class=0x030000 card=0x25621043 chip=0x25628086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82845G/GL/GV/GE/PE Integrated Graphics Device'
class = display
subclass = VGA
pcib1 at pci0:30:0: class=0x060400 card=0x00000000 chip=0x244e8086 rev=0x82 hdr=0x01
vendor = 'Intel Corporation'
device = '82801BA/CA/DB (ICH2/3/4) Hub Interface to PCI Bridge (244E)'
class = bridge
subclass = PCI-PCI
isab0 at pci0:31:0: class=0x060100 card=0x00000000 chip=0x24c08086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801DB (ICH4) LPC Interface Bridge'
class = bridge
subclass = PCI-ISA
atapci0 at pci0:31:1: class=0x01018a card=0x80891043 chip=0x24cb8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801DB (ICH4) UltraATA/100 EIDE Controller'
class = mass storage
subclass = ATA
More information about the freebsd-stable
mailing list