SCSI backup error

Lefteris Tsintjelis lefty at ene.asda.gr
Thu Jul 3 13:29:17 PDT 2003


Hi,

	Can someone please help me with this? I have just upgraded from 4.7 to 4.8-STABLE and
this is what I am getting when I try a tape backup. Please CC as I am not in the list. It was 
working well before the upgrade (dump -0ua -f - / | gzip -c -9 | dd of=/dev/nsa0).

Thank you,
Lefteris Tsintjelis

Jul  3 22:55:18 ene /kernel: >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
Jul  3 22:55:18 ene /kernel: ahc2: Dumping Card State while idle, at SEQADDR 0x9
Jul  3 22:55:18 ene /kernel: Card was paused
Jul  3 22:55:18 ene /kernel: ACCUM = 0x4, SINDEX = 0x67, DINDEX = 0x27, ARG_2 = 0x0
Jul  3 22:55:18 ene /kernel: HCNT = 0x0 SCBPTR = 0x0
Jul  3 22:55:18 ene /kernel: SCSISIGI[0x0] ERROR[0x0] SCSIBUSL[0x0] LASTPHASE[0x1]:(P_BUSFREE) 
Jul  3 22:55:18 ene /kernel: SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI) SBLKCTL[0x6]:(SELWIDE|ENAB20) 
Jul  3 22:55:18 ene /kernel: SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE) SEQ_FLAGS[0xc0]:(NO_CDB_SENT|NOT_IDENTIFIED) 
Jul  3 22:55:18 ene /kernel: SSTAT0[0x0] SSTAT1[0xa]:(PHASECHG|BUSFREE) SSTAT2[0x0] 
Jul  3 22:55:18 ene /kernel: SSTAT3[0x0] SIMODE0[0x8]:(ENSWRAP) SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO) 
Jul  3 22:55:18 ene /kernel: SXFRCTL0[0x80]:(DFON) DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) 
Jul  3 22:55:18 ene /kernel: STACK: 0xde 0x160 0x176 0x3
Jul  3 22:55:18 ene /kernel: SCB count = 20
Jul  3 22:55:18 ene /kernel: Kernel NEXTQSCB = 5
Jul  3 22:55:18 ene /kernel: Card NEXTQSCB = 5
Jul  3 22:55:18 ene /kernel: QINFIFO entries: 
Jul  3 22:55:18 ene /kernel: Waiting Queue entries: 
Jul  3 22:55:18 ene /kernel: Disconnected Queue entries: 0:3 
Jul  3 22:55:18 ene /kernel: QOUTFIFO entries: 
Jul  3 22:55:18 ene /kernel: Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 
Jul  3 22:55:18 ene /kernel: Sequencer SCB Info: 
Jul  3 22:55:18 ene /kernel: 0 SCB_CONTROL[0x44]:(DISCONNECTED|DISCENB) SCB_SCSIID[0x67] 
Jul  3 22:55:18 ene /kernel: SCB_LUN[0x0] SCB_TAG[0x3] 
Jul  3 22:55:18 ene /kernel: 1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
Jul  3 22:55:18 ene /kernel: SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
Jul  3 22:55:18 ene /kernel: 2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
Jul  3 22:55:18 ene /kernel: SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
Jul  3 22:55:18 ene /kernel: 3 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
......
Jul  3 22:55:19 ene /kernel: 31 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
Jul  3 22:55:19 ene /kernel: SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
Jul  3 22:55:19 ene /kernel: Pending list: 
Jul  3 22:55:19 ene /kernel: 3 SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0x67] SCB_LUN[0x0] 
Jul  3 22:55:19 ene /kernel: Kernel Free SCB list: 14 15 16 17 18 19 0 1 2 4 6 7 8 9 13 12 11 10 
Jul  3 22:55:19 ene /kernel: Untagged Q(6): 3 
Jul  3 22:55:19 ene /kernel: 
Jul  3 22:55:19 ene /kernel: <<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
Jul  3 22:55:19 ene /kernel: sg[0] - Addr 0x16b56d34 : Length 20
Jul  3 22:55:19 ene /kernel: (sa0:ahc2:0:6:0): Queuing a BDR SCB
Jul  3 22:55:19 ene /kernel: (sa0:ahc2:0:6:0): Bus Device Reset Message Sent
Jul  3 22:55:19 ene /kernel: (sa0:ahc2:0:6:0): no longer in timeout, status = 34b
Jul  3 22:55:19 ene /kernel: ahc2: Bus Device Reset on A:6. 1 SCBs aborted
Jul  3 22:55:19 ene /kernel: (sa0:ahc2:0:6:0): READ POSITION. CDB: 34 1 0 0 0 0 0 0 0 0 
Jul  3 22:55:19 ene /kernel: (sa0:ahc2:0:6:0): UNIT ATTENTION asc:29,0
Jul  3 22:55:19 ene /kernel: (sa0:ahc2:0:6:0): Power on, reset, or bus device reset occurred
Jul  3 22:55:19 ene /kernel: (sa0:ahc2:0:6:0): tape is now frozen- use an OFFLINE, REWIND or MTEOM command to clear this state.

--- dmesg ---

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.8-STABLE #0: Tue Jul  1 16:29:52 EEST 2003
    root at ene.asda.gr:/usr/obj/usr/src/sys/CUSTOM-SMP
Timecounter "i8254"  frequency 1193182 Hz
CPU: Intel Pentium III (596.92-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x683  Stepping = 3
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 536805376 (524224K bytes)
avail memory = 517513216 (505384K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
 cpu0 (BSP): apic id:  0, version: 0x00040011, at 0xfee00000
 cpu1 (AP):  apic id:  1, version: 0x00040011, at 0xfee00000
 io0 (APIC): apic id:  2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc0497000.
VESA: v3.0, 8192k memory, flags:0x1, mode table:0xc00c53d2 (c00053d2)
VESA: Matrox Graphics Inc.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 7 entries at 0xc00fdd10
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
IOAPIC #0 intpin 17 -> irq 2
IOAPIC #0 intpin 18 -> irq 16
IOAPIC #0 intpin 19 -> irq 17
IOAPIC #0 intpin 16 -> irq 18
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <Matrox MGA G200 AGP graphics accelerator> at 0.0 irq 18
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xd000-0xd01f irq 10 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Timecounter "PIIX"  frequency 3579545 Hz
chip1: <Intel 82371AB Power management controller> port 0x5000-0x500f at device 7.3 on pci0
pcm0: <AudioPCI ES1373-8> port 0xd400-0xd43f irq 2 at device 9.0 on pci0
pcm0: <Cirrus Logic CS4297A ac97 codec>
ahc0: <Adaptec 29160 Ultra160 SCSI adapter> port 0xd800-0xd8ff mem 0xe4102000-0xe4102fff irq 16 at device 10.0 on pci0
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0xdc00-0xdc3f mem 0xe4000000-0xe40fffff,0xe4100000-0xe4100fff irq 17 at device 11.0 on pci0
fxp0: Ethernet address 00:d0:b7:23:18:f5
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ahc1: <Adaptec aic7896/97 Ultra2 SCSI adapter> port 0xe000-0xe0ff mem 0xe4101000-0xe4101fff irq 18 at device 12.0 on pci0
aic7896/97: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc2: <Adaptec aic7896/97 Ultra2 SCSI adapter> port 0xe400-0xe4ff mem 0xe4103000-0xe4103fff irq 18 at device 12.1 on pci0
aic7896/97: Ultra2 Wide Channel B, SCSI Id=7, 32/253 SCBs
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xce000-0xce7ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2 at port 0x3e8-0x3ef irq 5 flags 0x20000 on isa0
sio2: type ST16650A
sio3: configured irq 9 not in bitmap of probed irqs 0
sio3 at port 0x2e8-0x2ef irq 9 flags 0x20000 on isa0
sio3: type ST16650A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ahc2: PCI error Interrupt at seqaddr = 0x2
ahc2: Signaled a Target Abort
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
IPsec: Initialized Security Association Processing.
Waiting 15 seconds for SCSI devices to settle
SMP: AP CPU #1 Launched!
sa0 at ahc2 bus 0 target 6 lun 0
sa0: <HP HP35470A T603> Removable Sequential Access SCSI-2 device 
sa0: 3.300MB/s transfers
Mounting root from ufs:/dev/da0s1a
cd0 at ahc2 bus 0 target 4 lun 0
cd0: <PLEXTOR CD-ROM PX-40TS 1.13> Removable CD-ROM SCSI-2 device 
cd0: 3.300MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
da0 at ahc0 bus 0 target 0 lun 0
da0: <WDIGTL WDE9180 ULTRA2 1.30> Fixed Direct Access SCSI-2 device 
da0: 40.000MB/s transfers (20.000MHz, offset 31, 16bit)
da0: 8727MB (17873040 512 byte sectors: 64H 32S/T 8727C)


More information about the freebsd-stable mailing list