page faults under last eve's stable

Wed Aug 27 05:01:29 PDT 2003

Hi,

If accepted you an advice, always that you to give one cvsup, waits about 15 the 20 days giving make world, because I find that to the times version STABLE is UNSTABLE, or then uses version - RELEASE (RELENG_4_8), therefore this yes that he seems to be a version STABLE, therefore nobody moves, only place corrections of problems. 
Here I will go to make this, cvsup today, wait about 20 days giving make world.

 Regards,

---------------------------------------------------
Vitor de Matos Carvalho - #5602098
Softinfo Network Administrator
Salvador - Bahia - Brazil
FreeBSD: The silent Workhorse
----- Original Message ----- 
From: "Randy Bush" <randy at psg.com>
To: "FreeBSD Stable" <freebsd-stable at freebsd.org>
Sent: Wednesday, August 27, 2003 6:39 AM
Subject: page faults under last eve's stable

> [ cvsupping again now ]
> 
> Fatal trap 12: page fault while in kernel mode
> fault virtual address   =3D 0x13
> fault code              =3D supervisor read, page not present
> instruction pointer     =3D 0x8:0xc0240140
> stack pointer           =3D 0x10:0xcd360e10
> frame pointer           =3D 0x10:0xcd360e18
> code segment            =3D base 0x0, limit 0xfffff, type 0x1b
>                         =3D DPL 0, pres 1, def32 1, gran 1
> processor eflags        =3D interrupt enabled, resume, IOPL =3D 0
> current process         =3D 97737 (sh)
> interrupt mask          =3D net bio cam=20
> trap number             =3D 12
> panic: page fault
> 
> syncing disks... 103 22 20 18 18 13 13 9 8 8 8 8 8 8 8 24 7 7 7 7 7 7 7=
>  13 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7=20
> giving up on 7 buffers
> Uptime: 5h58m18s
> 
> 
> Copyright (c) 1992-2003 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD 4.9-PRERELEASE #21: Tue Aug 26 08:53:07 GMT 2003
>     root at psg.com:/usr/obj/usr/src/sys/PSG
> Timecounter "i8254"  frequency 1193182 Hz
> CPU: Pentium III/Pentium III Xeon/Celeron (501.14-MHz 686-class CPU)
>   Origin = "GenuineIntel"  Id = 0x672  Stepping = 2
>   Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
> real memory  = 268423168 (262132K bytes)
> avail memory = 257744896 (251704K bytes)
> Preloaded elf kernel "kernel" at 0xc0377000.
> Pentium Pro MTRR support enabled
> Using $PIR table, 8 entries at 0xc00f0d10
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
> pci0: <PCI bus> on pcib0
> pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
> pci1: <PCI bus> on pcib1
> isab0: <Intel 82371AB PCI to ISA bridge> at device 4.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel PIIX4 ATA33 controller> port 0xd800-0xd80f at device 4.1 on pci0
> ata0: at 0x1f0 irq 14 on atapci0
> ata1: at 0x170 irq 15 on atapci0
> pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 4.2 irq 10
> chip1: <Intel 82371AB Power management controller> port 0xe800-0xe80f at device 4.3 on pci0
> ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> port 0xd000-0xd0ff mem 0xe2000000-0xe2000fff irq 10 at device 6.0 on pci0
> aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
> fxp0: <Intel 82558 Pro/100 Ethernet> port 0xb800-0xb81f mem 0xe1800000-0xe18fffff,0xe3000000-0xe3000fff irq 11 at device 7.0 on pci0
> fxp0: Ethernet address 00:e0:18:98:63:22
> inphy0: <i82555 10/100 media interface> on miibus0
> inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> cy0: <Cyclades Cyclom-Y Serial Adapter> port 0xb400-0xb47f mem 0xe0800000-0xe0803fff,0xe1000000-0xe100007f irq 11 at device 10.0 on pci0
> cy0: driver is using old-style compatibility shims
> orm0: <Option ROM> at iomem 0xc8000-0xcd7ff on isa0
> pmtimer0 on isa0
> fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
> fdc0: FIFO enabled, 8 bytes threshold
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 16550A, console
> sio1 at port 0x2f8-0x2ff irq 3 on isa0
> sio1: type 16550A
> ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/9 bytes threshold
> IP packet filtering initialized, divert disabled, rule-based forwarding enabled, default to deny, unlimited logging
> IPsec: Initialized Security Association Processing.
> ad0: 78167MB <Maxtor 4W080H6> [158816/16/63] at ata0-master UDMA33
> Waiting 5 seconds for SCSI devices to settle
> Mounting root from ufs:/dev/da0s1a
> da0 at ahc0 bus 0 target 0 lun 0
> da0: <IBM DDYS-T36950N S96H> Fixed Direct Access SCSI-3 device 
> da0: 80.000MB/s transfers (40.000MHz, offset 63, 16bit), Tagged Queueing Enabled
> da0: 35003MB (71687340 512 byte sectors: 255H 63S/T 4462C)
> WARNING: / was not properly dismounted
> 
> _______________________________________________
> freebsd-stable at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org"
> 
> 