Health check

vizion communication vizion at ixpres.com
Mon Apr 21 09:01:28 PDT 2003


Hi

I have a quad processor Compaq Proliant 5500. The output
from dmesg seems strange (I have also sent a copy to
freebsd-smp to ask about smp issues) and there are also some
performance issues which I suspect are smp related. Could
anyone who fels so inclined please take a look at the output
and let me have any comments.

Thanks

_______________________________

Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991,
1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD 4.7-RELEASE #0: Sun Feb 16 17:25:33 PST 2003
    root at dns3.vizion2000.net:/usr/obj/usr/src/sys/COMPAQ
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (499.84-MHz
686-class CPU)
  Origin = "GenuineIntel"  Id = 0x672  Stepping = 2

Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,S
EP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 2147467264 (2097136K bytes)
config> di sn0
config> di lnc0
config> di ie0
config> di fe0
config> di cs0
config> q
avail memory = 2086445056 (2037544K bytes)
APIC_IO: MP table broken: 8259->APIC entry missing!
Changing APIC ID for IO APIC #0 from 0 to 8 on chip
Programming 35 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
 cpu0 (BSP): apic id:  3, version: 0x00040011, at 0xfee00000
 cpu1 (AP):  apic id:  0, version: 0x00040011, at 0xfee00000
 cpu2 (AP):  apic id:  1, version: 0x00040011, at 0xfee00000
 cpu3 (AP):  apic id:  2, version: 0x00040011, at 0xfee00000
 io0 (APIC): apic id:  8, version: 0x00220011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc051f000.
Preloaded userconfig_script "/boot/kernel.conf" at
0xc051f09c.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82454NX PXB#0, Bus#A> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=8086 device=5200)> at
device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci0: <unknown card> (vendor=0x8086, dev=0x5201) at 1.1 irq
9
pci0: <NVidia Riva Ultra Vanta TNT2 graphics accelerator> at
2.0 irq 5
pci0: <unknown card> (vendor=0x0e11, dev=0xa0f0) at 12.0
sym0: <875> port 0x2000-0x20ff mem
0xc4fd0000-0xc4fd0fff,0xc4fe0000-0xc4fe00ff irq 10 at device
13.0 on pci0
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
sym1: <875> port 0x2400-0x24ff mem
0xc4fb0000-0xc4fb0fff,0xc4fc0000-0xc4fc00ff irq 15 at device
13.1 on pci0
sym1: No NVRAM, ID 7, Fast-20, SE, parity checking
pci0: <ATI Mach64-GV graphics accelerator> at 14.0
isab0: <Intel 82371AB PCI to ISA bridge> at device 15.0 on
pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x2c00-0x2c0f
at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port
0x2c20-0x2c3f at device 15.2 on pci0
pci_cfgintr: can't route an interrupt to 0:15 INTD
uhci0: Could not allocate irq
device_probe_and_attach: uhci0 attach returned 6
Timecounter "PIIX"  frequency 3579545 Hz
chip0: <Intel 82371AB Power management controller> port
0x1240-0x124f at device 15.3 on pci0
pcib2: <Intel 82454NX PCI Expander Bridge> at device 18.0 on
pci0
pcib3: <Intel 82454NX PCI Expander Bridge> at device 19.0 on
pci0
pcib4: <Intel 82454NX PXB#0, Bus#B> on motherboard
pci4: <PCI bus> on pcib4
pcib5: <IBM 82351 PCI-PCI bridge> at device 1.0 on pci4
pci5: <PCI bus> on pcib5
ida0: <Compaq Smart Array 3200 controller> port
0x4000-0x40ff mem 0xc6ef0000-0xc6ef00ff irq 15 at device 0.0
on pci5
ida0: drives=4 firm_rev=4.06
idad0: <Compaq Logical Drive> on ida0
idad0: 24997MB (51195840 sectors), blocksize=512
idad1: <Compaq Logical Drive> on ida0
idad1: 14997MB (30714240 sectors), blocksize=512
idad2: <Compaq Logical Drive> on ida0
idad2: 12096MB (24773760 sectors), blocksize=512
idad3: <Compaq Logical Drive> on ida0
idad3: 26029MB (53309280 sectors), blocksize=512
ahc0: <Adaptec 2940 SCSI adapter> port 0x3000-0x30ff mem
0xc6df0000-0xc6df0fff irq 11 at device 2.0 on pci4
aic7870: Single Channel A, SCSI Id=7, 16/253 SCBs
pcib6: <DEC 21152 PCI-PCI bridge> at device 5.0 on pci4
pci6: <PCI bus> on pcib6
de0: <Digital 21140A Fast Ethernet> port 0x5000-0x507f mem
0xc6ff0000-0xc6ff007f irq 9 at device 4.0 on pci6
de0: Cogent EM440TX 21140A [10-100Mb/s] pass 2.2
de0: address 00:00:d1:1c:c4:f9
de1: <Digital 21140A Fast Ethernet> port 0x5080-0x50ff mem
0xc6fe0000-0xc6fe007f irq 9 at device 5.0 on pci6
de1: Cogent EM440TX 21140A [10-100Mb/s] pass 2.2
de1: address 00:00:d1:1c:c4:fa
de2: <Digital 21140A Fast Ethernet> port 0x5400-0x547f mem
0xc6fd0000-0xc6fd007f irq 9 at device 6.0 on pci6
de2: Cogent EM440TX 21140A [10-100Mb/s] pass 2.2
de2: address 00:00:d1:1c:c4:fb
de3: <Digital 21140A Fast Ethernet> port 0x5480-0x54ff mem
0xc6fc0000-0xc6fc007f irq 9 at device 7.0 on pci6
de3: Cogent EM440TX 21140A [10-100Mb/s] pass 2.2
de3: address 00:00:d1:1c:c4:fc
eisa0: <EISA bus> on motherboard
mainboard0: <CPQ0808 (System Board)> on eisa0 slot 0
orm0: <Option ROMs> at iomem 0xe8000-0xedfff,0xee000-0xeffff
on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6
drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on
isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: cannot reserve I/O port range
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
acd0: CDROM <CDU5211> at ata0-master PIO4
Waiting 15 seconds for SCSI devices to settle
de1: enabling Full Duplex 100baseTX port
de0: enabling 10baseT port
de2: enabling 10baseT port
de0: link down: cable problem?
de2: link down: cable problem?
de3: autosense failed: cable problem?
(probe31:ahc0:0:1:0): SCB 0x5 - timed out
ahc0: Dumping Card State in Message-out phase, at SEQADDR
0xe3
ACCUM = 0xa0, SINDEX = 0x61, DINDEX = 0x8c, ARG_2 = 0x0
HCNT = 0x0 SCBPTR = 0x2
SCSISEQ = 0x12, SBLKCTL = 0x0
 DFCNTRL = 0x0, DFSTATUS = 0x29
LASTPHASE = 0xa0, SCSISIGI = 0xb6, SXFRCTL0 = 0x88
SSTAT0 = 0x7, SSTAT1 = 0x3
STACK == 0xe1, 0xfb, 0x156, 0x0
SCB count = 10
Kernel NEXTQSCB = 7
Card NEXTQSCB = 3
QINFIFO entries: 3 2 9 8
Waiting Queue entries:
Disconnected Queue entries: 1:5
QOUTFIFO entries:
Sequencer Free SCB List: 0 3 4 5 6 7 8 9 10 11 12 13 14 15
Sequencer SCB Info: 0(c 0x40, s 0x7, l 0, t 0xff) 1(c 0x44,
s 0x17, l 0, t 0x5) 2(c 0x40, s 0x27, l 0, t 0x4) 3(c 0x0, s
0xff, l 255, t 0xff) 4(c 0x0, s 0xff, l 255, t 0xff) 5(c
0x0, s 0xff, l 255, t 0xff) 6(c 0x0, s 0xff, l 255, t 0xff)
7(c 0x0, s 0xff, l 255, t 0xff) 8(c 0x0, s 0xff, l 255, t
0xff) 9(c 0x0, s 0xff, l 255, t 0xff) 10(c 0x0, s 0xff, l
255, t 0xff) 11(c 0x0, s 0xff, l 255, t 0xff) 12(c 0x0, s
0xff, l 255, t 0xff) 13(c 0x0, s 0xff, l 255, t 0xff) 14(c
0x0, s 0xff, l 255, t 0xff) 15(c 0x0, s 0xff, l 255, t 0xff)
Pending list: 8(c 0x40, s 0x7, l 1), 9(c 0x50, s 0x67, l 0),
2(c 0x50, s 0x57, l 0), 3(c 0x50, s 0x47, l 0), 4(c 0x40, s
0x27, l 0), 5(c 0x40, s 0x17, l 0)
Kernel Free SCB list: 6 1 0
Untagged Q(0): 8
Untagged Q(1): 5
Untagged Q(2): 4
Untagged Q(4): 3
Untagged Q(5): 2
Untagged Q(6): 9
(probe31:ahc0:0:1:0): Other SCB Timeout
(probe32:ahc0:0:2:0): SCB 0x4 - timed out
ahc0: Dumping Card State in Message-out phase, at SEQADDR
0x15c
ACCUM = 0xa0, SINDEX = 0x61, DINDEX = 0x8c, ARG_2 = 0x0
HCNT = 0x0 SCBPTR = 0x2
SCSISEQ = 0x12, SBLKCTL = 0x0
 DFCNTRL = 0x0, DFSTATUS = 0x29
LASTPHASE = 0xa0, SCSISIGI = 0xb6, SXFRCTL0 = 0x88
SSTAT0 = 0x7, SSTAT1 = 0x3
STACK == 0xfb, 0x156, 0x0, 0xe1
SCB count = 10
Kernel NEXTQSCB = 7
Card NEXTQSCB = 3
QINFIFO entries: 3 2 9 8
Waiting Queue entries:
Disconnected Queue entries: 1:5
QOUTFIFO entries:
Sequencer Free SCB List: 0 3 4 5 6 7 8 9 10 11 12 13 14 15
Sequencer SCB Info: 0(c 0x40, s 0x7, l 0, t 0xff) 1(c 0x44,
s 0x17, l 0, t 0x5) 2(c 0x40, s 0x27, l 0, t 0x4) 3(c 0x0, s
0xff, l 255, t 0xff) 4(c 0x0, s 0xff, l 255, t 0xff) 5(c
0x0, s 0xff, l 255, t 0xff) 6(c 0x0, s 0xff, l 255, t 0xff)
7(c 0x0, s 0xff, l 255, t 0xff) 8(c 0x0, s 0xff, l 255, t
0xff) 9(c 0x0, s 0xff, l 255, t 0xff) 10(c 0x0, s 0xff, l
255, t 0xff) 11(c 0x0, s 0xff, l 255, t 0xff) 12(c 0x0, s
0xff, l 255, t 0xff) 13(c 0x0, s 0xff, l 255, t 0xff) 14(c
0x0, s 0xff, l 255, t 0xff) 15(c 0x0, s 0xff, l 255, t 0xff)
Pending list: 8(c 0x40, s 0x7, l 1), 9(c 0x50, s 0x67, l 0),
2(c 0x50, s 0x57, l 0), 3(c 0x50, s 0x47, l 0), 4(c 0x40, s
0x27, l 0), 5(c 0x40, s 0x17, l 0)
Kernel Free SCB list: 6 1 0
Untagged Q(0): 8
Untagged Q(1): 5
Untagged Q(2): 4
Untagged Q(4): 3
Untagged Q(5): 2
Untagged Q(6): 9
(probe32:ahc0:0:2:0): BDR message in message buffer
(probe32:ahc0:0:2:0): no longer in timeout, status = 300
Mounting root from ufs:/dev/idad0s1a
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST34371N 0280> Fixed Direct Access SCSI-2
device
da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged
Queueing Enabled
da0: 4148MB (8496960 512 byte sectors: 64H 32S/T 4148C)
da3 at ahc0 bus 0 target 4 lun 0
da3: <SEAGATE ST34371N 0280> Fixed Direct Access SCSI-2
device
da3: 10.000MB/s transfers (10.000MHz, offset 15), Tagged
Queueing Enabled
da3: 4148MB (8496960 512 byte sectors: 64H 32S/T 4148C)
da2 at ahc0 bus 0 target 2 lun 0
da2: <SEAGATE ST34371N 0484> Fixed Direct Access SCSI-2
device
da2: 10.000MB/s transfers (10.000MHz, offset 15), Tagged
Queueing Enabled
da2: 4148MB (8496884 512 byte sectors: 64H 32S/T 4148C)
da5 at ahc0 bus 0 target 6 lun 0
da5: <SEAGATE ST15150N 0023> Fixed Direct Access SCSI-2
device
da5: 10.000MB/s transfers (10.000MHz, offset 15), Tagged
Queueing Enabled
da5: 4095MB (8388315 512 byte sectors: 64H 32S/T 4095C)
da4 at ahc0 bus 0 target 5 lun 0
da4: <SEAGATE ST15150N 0023> Fixed Direct Access SCSI-2
device
da4: 10.000MB/s transfers (10.000MHz, offset 15), Tagged
Queueing Enabled
da4: 4095MB (8388315 512 byte sectors: 64H 32S/T 4095C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <SEAGATE ST34371N 0484> Fixed Direct Access SCSI-2
device
da1: 10.000MB/s transfers (10.000MHz, offset 15), Tagged
Queueing Enabled
da1: 4148MB (8496884 512 byte sectors: 64H 32S/T 4148C)



More information about the freebsd-stable mailing list