V440 with 1.593GHz CPU has scsi errors on LSILogic 1030 Ultra4
controller
Herr Virek
josefvirek at gmail.com
Mon Aug 22 23:22:44 UTC 2011
Hello.
I have a four cpu V440 running current well for a while now.
Tried to install on another V440 with this CPU and I have scsi errors
until panic when booting off CD or a hard drive with 8.2 installed
Has anyone seen issues with this particular CPU?
http://www.sunshack.org/data/sh/2.1.8/infoserver.central/data/syshbk/Devices/System_Board/SYSBD_SunFireV440_CPU.html#6788
I've swapped disks and optical drives a few times.
S10 U8 seems OK so I'm not sure where to start on this one. I've also
tried with auto-boot? false and true.
Thanks!.
PS - Thanks everyone for your work. I love running FreeBSD on v240 and v440.
----------------
Rebooting with command: boot
Boot device: disk File and args:
>> FreeBSD/sparc64 boot block
Boot path: /pci at 1f,700000/scsi at 2/disk at 0,0:a
Boot loader: /boot/loader
Consoles: Open Firmware console
Booting with sun4u support.
FreeBSD/sparc64 bootstrap loader, Revision 1.0
(root at v240, Tue Mar 1 00:21:58 UTC 2011)
bootpath="/pci at 1f,700000/scsi at 2/disk at 0,0:a"
Loading /boot/defaults/loader.conf
/boot/kernel/kernel data=0x9d3748+0x7f668 syms=[0x8+0xa9db8+0x8+0x9c673]
-
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...
jumping to kernel entry at 0xc0088000.
Copyright (c) 1992-2011 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.2-RELEASE-p2 #2: Thu Jun 16 17:49:38 UTC 2011
root at v240:/usr/obj/usr/src/sys/GENERIC sparc64
real memory = 17179869184 (16384 MB)
avail memory = 16817340416 (16038 MB)
cpu0: Sun Microsystems UltraSparc-IIIi Processor (1593.00 MHz CPU)
cpu1: Sun Microsystems UltraSparc-IIIi Processor (1593.00 MHz CPU)
cpu2: Sun Microsystems UltraSparc-IIIi Processor (1593.00 MHz CPU)
cpu3: Sun Microsystems UltraSparc-IIIi Processor (1593.00 MHz CPU)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
ispfw: registered firmware <isp_1000>
ispfw: registered firmware <isp_1040>
ispfw: registered firmware <isp_1040_it>
ispfw: registered firmware <isp_1080>
ispfw: registered firmware <isp_1080_it>
ispfw: registered firmware <isp_12160>
ispfw: registered firmware <isp_12160_it>
ispfw: registered firmware <isp_2100>
ispfw: registered firmware <isp_2200>
ispfw: registered firmware <isp_2300>
ispfw: registered firmware <isp_2322>
ispfw: registered firmware <isp_2400>
ispfw: registered firmware <isp_2400_multi>
ispfw: registered firmware <isp_2500>
ispfw: registered firmware <isp_2500_multi>
kbd0 at kbdmux0
nexus0: <Open Firmware Nexus device>
pcib0: <Sun Host-PCI bridge> mem
0x4000e600000-0x4000e60afff,0x4000e410000-0x4000e41701f,0x7ce00000000-0x7ce000000ff,0x4000e780000-0x4000e78ffff
irq 1842,1840,1841,1844,1838 on nexus0
pcib0: Tomatillo, version 4, IGN 0x1c, bus A, 66MHz
pcib0: DVMA map: 0xc0000000 to 0xdfffffff 65536 entries
pcib0: [FILTER]
pcib0: [FILTER]
pcib0: [FILTER]
pcib0: [FILTER]
pci0: <OFW PCI bus> on pcib0
pcib1: <Sun Host-PCI bridge> mem
0x4000ef00000-0x4000ef0afff,0x4000ec10000-0x4000ec1701f,0x7c600000000-0x7c6000000ff,0x4000ef80000-0x4000ef8ffff
irq 1907,1904,1905,1908,1903 on nexus0
pcib1: Tomatillo, version 4, IGN 0x1d, bus B, 66MHz
pcib1: DVMA map: 0xc0000000 to 0xdfffffff 65536 entries
pcib1: [FILTER]
pci1: <OFW PCI bus> on pcib1
pcib2: <Sun Host-PCI bridge> mem
0x4000f600000-0x4000f60afff,0x4000f410000-0x4000f41701f,0x7fe00000000-0x7fe000000ff,0x4000f780000-0x4000f78ffff
irq 1970,1968,1969,1972,1964 on nexus0
pcib2: Tomatillo, version 4, IGN 0x1e, bus A, 33MHz
pcib2: DVMA map: 0xc0000000 to 0xdfffffff 65536 entries
pcib2: [FILTER]
pcib2: [FILTER]
pcib2: [FILTER]
pcib2: [FILTER]
pci2: <OFW PCI bus> on pcib2
pcib3: <OFW PCI-PCI bridge> at device 4.0 on pci2
pci3: <OFW PCI bus> on pcib3
pcib4: <Sun Host-PCI bridge> mem
0x4000ff00000-0x4000ff0afff,0x4000fc10000-0x4000fc1701f,0x7f600000000-0x7f6000000ff,0x4000ff80000-0x4000ff8ffff
irq 2035,2032,2033,2036,2029 on nexus0
pcib4: Tomatillo, version 4, IGN 0x1f, bus B, 66MHz
pcib4: DVMA map: 0xc0000000 to 0xdfffffff 65536 entries
pcib4: [FILTER]
pci4: <OFW PCI bus> on pcib4
nexus0: <memory-controller> mem 0x40000000000-0x40000000007 type
memory-controller (no driver attached)
nexus0: <memory-controller> mem 0x40000800000-0x40000800007 type
memory-controller (no driver attached)
nexus0: <memory-controller> mem 0x40001000000-0x40001000007 type
memory-controller (no driver attached)
nexus0: <memory-controller> mem 0x40001800000-0x40001800007 type
memory-controller (no driver attached)
cas0: <Sun Cassini+ Gigabit Ethernet> mem 0x200000-0x3fffff at device
2.0 on pci0
miibus0: <MII bus> on cas0
brgphy0: <BCM5754 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
cas0: 16kB RX FIFO, 9kB TX FIFO
cas0: Ethernet address: 00:03:ba:c3:d2:49
cas0: [FILTER]
jbusppm0: <JBus power management> mem
0x4000e000000-0x4000e000007,0x4000e410050-0x4000e41005f on nexus0
isab0: <PCI-ISA bridge> at device 7.0 on pci2
isa0: <ISA bus> on isab0
cas1: <Sun Cassini+ Gigabit Ethernet> mem 0x200000-0x3fffff at device
0.0 on pci3
miibus1: <MII bus> on cas1
brgphy1: <BCM5401 10/100/1000baseTX PHY> PHY 1 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
cas1: 16kB RX FIFO, 9kB TX FIFO
cas1: Ethernet address: 00:03:ba:c3:d2:49
cas1: [FILTER]
pci2: <old, non-VGA display device> at device 6.0 (no driver attached)
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem
0x1000000-0x1000fff at device 10.0 on pci2
ohci0: [ITHREAD]
usbus0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
ohci1: <AcerLabs M5237 (Aladdin-V) USB controller> mem
0x2000000-0x2000fff at device 11.0 on pci2
ohci1: [ITHREAD]
usbus1: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci1
atapci0: <AcerLabs M5229 UDMA100 controller> port
0x900-0x907,0x918-0x91b,0x910-0x917,0x908-0x90b,0x920-0x92f at device
13.0 on pci2
atapci0: [ITHREAD]
atapci0: using PIO transfers above 137GB as workaround for 48bit DMA
access bug, expect reduced performance
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
jbusppm1: <JBus power management> mem
0x4000f000000-0x4000f000007,0x4000f410050-0x4000f41005f on nexus0
cas2: <Sun Cassini+ Gigabit Ethernet> mem 0x200000-0x3fffff at device
1.0 on pci4
miibus2: <MII bus> on cas2
brgphy2: <BCM5754 10/100/1000baseTX PHY> PHY 1 on miibus2
brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
cas2: 16kB RX FIFO, 9kB TX FIFO
cas2: Ethernet address: 00:03:ba:c3:d2:49
cas2: [FILTER]
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x300-0x3ff mem
0x400000-0x40ffff,0x410000-0x41ffff at device 2.0 on pci4
mpt0: [ITHREAD]
mpt0: MPI Version=1.2.12.0
mpt0: Capabilities: ( RAID-1E RAID-1 SAFTE )
mpt0: 0 Active Volumes (1 Max)
mpt0: 0 Hidden Drive Members (6 Max)
mpt1: <LSILogic 1030 Ultra4 Adapter> port 0x400-0x4ff mem
0x420000-0x42ffff,0x430000-0x43ffff at device 2.1 on pci4
mpt1: [ITHREAD]
mpt1: MPI Version=1.2.12.0
mpt1: Capabilities: ( RAID-1E RAID-1 SAFTE )
mpt1: 0 Active Volumes (1 Max)
mpt1: 0 Hidden Drive Members (6 Max)
nexus0: <i2c> mem 0x4000fc64000-0x4000fc6400f type i2c (no driver attached)
nexus0: <syscons> type unknown (no driver attached)
rtc0: <Real-Time Clock> at port 0x70-0x71 on isa0
uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 34 on isa0
uart0: [FILTER]
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> at port 0x2e8-0x2ef irq 34 on isa0
uart1: [FILTER]
Timecounter "tick" frequency 1593000000 Hz quality 10
Timecounter "stick" frequency 10000000 Hz quality 10
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
ugen0.1: <AcerLabs> at usbus0
uhub0: <AcerLabs OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <AcerLabs> at usbus1
uhub1: <AcerLabs OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
acd0: DVDROM <TOSHIBA DVD-ROM SD-C2612/1011> at ata2-master UDMA33
(probe0:mpt0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:mpt0:0:0:0): CAM status: SCSI Status Error
(probe0:mpt0:0:0:0): SCSI status: Check Condition
(probe0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:47,0 (SCSI parity error)
(probe0:mpt0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:mpt0:0:0:0): CAM status: SCSI Status Error
(probe0:mpt0:0:0:0): SCSI status: Check Condition
(probe0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:47,0 (SCSI parity error)
(probe0:mpt0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:mpt0:0:0:0): CAM status: SCSI Status Error
(probe0:mpt0:0:0:0): SCSI status: Check Condition
(probe0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:47,0 (SCSI parity error)
(probe0:mpt0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:mpt0:0:0:0): CAM status: SCSI Status Error
(probe0:mpt0:0:0:0): SCSI status: Check Condition
(probe0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:47,0 (SCSI parity error)
(probe0:mpt0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:mpt0:0:0:0): CAM status: SCSI Status Error
(probe0:mpt0:0:0:0): SCSI status: Check Condition
(da0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator
detected error message received)
(da0:mpt0:0:0:0): READ(10). CDB: 28 0 1 3f dd 10 0 0 10 0
(da0:mpt0:0:0:0): CAM status: SCSI Status Error
(da0:mpt0:0:0:0): SCSI status: Check Condition
(da0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator
detected error message received)
mpt0: EvtLogData: IOCLogInfo: 0x110a0000
mpt0: EvtLogData: Event Data: 10000205
mpt0: mpt_cam_event: 0x1
(da0:mpt0:0:0:0): READ(10). CDB: 28 0 1 3f dd 0 0 0 10 0
(da0:mpt0:0:0:0): CAM status: SCSI Status Error
(da0:mpt0:0:0:0): SCSI status: Check Condition
(da0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator
detected error message received)
(da0:mpt0:0:0:0): READ(10). CDB: 28 0 1 3f dd 0 0 0 10 0
(da0:mpt0:0:0:0): CAM status: SCSI Status Error
(da0:mpt0:0:0:0): SCSI status: Check Condition
(da0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator
detected error message received)
(da0:mpt0:0:0:0): READ(10). CDB: 28 0 1 3f dd 0 0 0 10 0
(da0:mpt0:0:0:0): CAM status: SCSI Status Error
(da0:mpt0:0:0:0): SCSI status: Check Condition
(da0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator
detected error message received)
(da0:mpt0:0:0:0): READ(10). CDB: 28 0 1 3f dd 0 0 0 10 0
(da0:mpt0:0:0:0): CAM status: SCSI Status Error
(da0:mpt0:0:0:0): SCSI status: Check Condition
(da0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator
detected error message received)
(da0:mpt0:0:0:0): READ(10). CDB: 28 0 1 3f dd 0 0 0 10 0
(da0:mpt0:0:0:0): CAM status: SCSI Status Error
(da0:mpt0:0:0:0): SCSI status: Check Condition
(da0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator
detected error message received)
(da0:mpt0:0:0:0): READ(10). CDB: 28 0 1 3f df 0 0 0 10 0
(da0:mpt0:0:0:0): CAM status: SCSI Status Error
(da0:mpt0:0:0:0): SCSI status: Check Condition
(da0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator
detected error message received)
mpt0: EvtLogData: IOCLogInfo: 0x110a0000
mpt0: EvtLogData: Event Data: 10000205
mpt0: mpt_cam_event: 0x1
(da0:mpt0:0:0:0): READ(10). CDB: 28 0 1 3f df 0 0 0 10 0
(da0:mpt0:0:0:0): CAM status: SCSI Status Error
(da0:mpt0:0:0:0): SCSI status: Check Condition
(da0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator
detected error message received)
(da0:mpt0:0:0:0): READ(10). CDB: 28 0 1 3f df 0 0 0 10 0
(da0:mpt0:0:0:0): CAM status: SCSI Status Error
(da0:mpt0:0:0:0): SCSI status: Check Condition
(da0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator
detected error message received)
(da0:mpt0:0:0:0): READ(10). CDB: 28 0 1 3f df 0 0 0 10 0
(da0:mpt0:0:0:0): CAM status: SCSI Status Error
(da0:mpt0:0:0:0): SCSI status: Check Condition
(da0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator
detected error message received)
(da0:mpt0:0:0:0): READ(10). CDB: 28 0 1 3f df 0 0 0 10 0
(da0:mpt0:0:0:0): CAM status: SCSI Status Error
(da0:mpt0:0:0:0): SCSI status: Check Condition
(da0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator
detected error message received)
Trying to mount root from ufs:/dev/da0a
(da0:mpt0:0:0:0): READ(6). CDB: 8 0 21 60 4 0
(da0:mpt0:0:0:0): CAM status: SCSI Status Error
(da0:mpt0:0:0:0): SCSI status: Check Condition
(da0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator
detected error message received)
(da0:mpt0:0:0:0): READ(10). CDB: 28 0 0 0 8d 40 0 1 0 0
(da0:mpt0:0:0:0): CAM status: SCSI Status Error
(da0:mpt0:0:0:0): SCSI status: Check Condition
(da0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator
detected error message received)
(da0:mpt0:0:0:0): READ(10). CDB: 28 0 0 0 8d 40 0 1 0 0
(da0:mpt0:0:0:0): CAM status: SCSI Status Error
(da0:mpt0:0:0:0): SCSI status: Check Condition
(da0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator
detected error message received)
(da0:mpt0:0:0:0): READ(10). CDB: 28 0 0 0 8d 40 0 1 0 0
(da0:mpt0:0:0:0): CAM status: SCSI Status Error
(da0:mpt0:0:0:0): SCSI status: Check Condition
(da0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator
detected error message received)
(da0:mpt0:0:0:0): READ(10). CDB: 28 0 0 0 8d 40 0 1 0 0
(da0:mpt0:0:0:0): CAM status: SCSI Status Error
(da0:mpt0:0:0:0): SCSI status: Check Condition
(da0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator
detected error message received)
(da0:mpt0:0:0:0): READ(10). CDB: 28 0 0 0 8d 40 0 1 0 0
(da0:mpt0:0:0:0): CAM status: SCSI Status Error
(da0:mpt0:0:0:0): SCSI status: Check Condition
(da0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator
detected error message received)
g_vfs_done():da0a[READ(offset=18513920, length=131072)]error = 5
vnode_pager_getpages: I/O read error
exec /sbin/init: error 5
mpt0: EvtLogData: IOCLogInfo: 0x110a0000
mpt0: EvtLogData: Event Data: 10000205
mpt0: mpt_cam_event: 0x1
(da0:mpt0:0:0:0): READ(10). CDB: 28 0 0 0 35 20 0 1 0 0
(da0:mpt0:0:0:0): CAM status: SCSI Status Error
(da0:mpt0:0:0:0): SCSI status: Check Condition
(da0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator
detected error message received)
(da0:mpt0:0:0:0): READ(10). CDB: 28 0 0 0 35 20 0 1 0 0
(da0:mpt0:0:0:0): CAM status: SCSI Status Error
(da0:mpt0:0:0:0): SCSI status: Check Condition
(da0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator
detected error message received)
(da0:mpt0:0:0:0): READ(10). CDB: 28 0 0 0 35 20 0 1 0 0
(da0:mpt0:0:0:0): CAM status: SCSI Status Error
(da0:mpt0:0:0:0): SCSI status: Check Condition
(da0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator
detected error message received)
(da0:mpt0:0:0:0): READ(10). CDB: 28 0 0 0 35 20 0 1 0 0
(da0:mpt0:0:0:0): CAM status: SCSI Status Error
(da0:mpt0:0:0:0): SCSI status: Check Condition
(da0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator
detected error message received)
(da0:mpt0:0:0:0): READ(10). CDB: 28 0 0 0 35 20 0 1 0 0
(da0:mpt0:0:0:0): CAM status: SCSI Status Error
(da0:mpt0:0:0:0): SCSI status: Check Condition
(da0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator
detected error message received)
g_vfs_done():da0a[READ(offset=6963200, length=131072)]error = 5
vnode_pager_getpages: I/O read error
exec /sbin/init.bak: error 5
(da0:mpt0:0:0:0): READ(6). CDB: 8 0 21 e0 e0 0
(da0:mpt0:0:0:0): CAM status: SCSI Status Error
(da0:mpt0:0:0:0): SCSI status: Check Condition
(da0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator
detected error message received)
(da0:mpt0:0:0:0): READ(6). CDB: 8 0 21 e0 e0 0
(da0:mpt0:0:0:0): CAM status: SCSI Status Error
(da0:mpt0:0:0:0): SCSI status: Check Condition
(da0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator
detected error message received)
(da0:mpt0:0:0:0): READ(6). CDB: 8 0 21 e0 e0 0
(da0:mpt0:0:0:0): CAM status: SCSI Status Error
(da0:mpt0:0:0:0): SCSI status: Check Condition
(da0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator
detected error message received)
(da0:mpt0:0:0:0): READ(6). CDB: 8 0 21 e0 e0 0
(da0:mpt0:0:0:0): CAM status: SCSI Status Error
(da0:mpt0:0:0:0): SCSI status: Check Condition
(da0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator
detected error message received)
(da0:mpt0:0:0:0): READ(6). CDB: 8 0 21 e0 e0 0
(da0:mpt0:0:0:0): CAM status: SCSI Status Error
(da0:mpt0:0:0:0): SCSI status: Check Condition
(da0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator
detected error message received)
g_vfs_done():da0a[READ(offset=4440064, length=114688)]error = 5
vnode_pager_getpages: I/O read error
exec /rescue/init: error 5
init: not found in path
/sbin/init:/sbin/oinit:/sbin/init.bak:/rescue/init:/stand/sysinstall
panic: no init
cpuid = 2
KDB: stack backtrace:
#0 0xc038fb14 at start_init+0x3d4
#1 0xc03b1c40 at fork_exit+0x80
#2 0xc00891e8 at fork_trampoline+0x8
Also pasted in here;
http://pastebin.com/Pdy6Xau3
- Eric
More information about the freebsd-sparc64
mailing list