E150 support

[Bernd Walter]

On Fri, Feb 24, 2006 at 12:59:25PM +0100, Bernd Walter wrote:
> On Tue, Feb 21, 2006 at 09:31:12PM +0100, Bernd Walter wrote:
> > On Tue, Feb 21, 2006 at 09:13:10PM +0100, Marius Strobl wrote:
> > > On Tue, Feb 21, 2006 at 08:12:48PM +0100, Bernd Walter wrote:
> > > > Has anyone an overview about what might be required to support
> > > > an E150?
> > > > 
> > > 
> > > AFAICT they use the same motherboard as Ultra 1 so they should
> > > work just fine with 6.1-BETA2 modulo the on-board floppy and
> > > printer port controllers as well as framebuffer cards. Releases
> > > prior to 6.1-BETA2 don't support the on-board Ethernet and the
> > > 6.0-RELEASE and prior loader can't boot from devices attached
> > > to the on-board SCSI controller though.
> > 
> > I've heared that with the Ultra1 motherboard as well, but wasn't
> > shure since only the Ultra1e is listed as supported.
> > So there is even hope for the onboard SCSI and Ethernet.
> > Not that they are very importent.
> > Once I have my fingers on real hardware I will keep you informed.
> 
> With 6.2-Beta2 ISO1:
s/6.2/6.1/

-- 
B.Walter                   BWCT                http://www.bwct.de
bernd at bwct.de                                  info at bwct.de