FreeBSD 5.3 for SPARC64 does not find SCSI disks on Unltra 1E

[Torfinn Ingolfsen]

On Fri, 19 Nov 2004 17:14:37 -0800
"David O'Brien" <obrien at freebsd.org> wrote:

> IIRC, the SCSI controller in the Ultra 1E isn't supported yet.  So you
> can only use the machine diskless.  Or install a Qlogic ISP1000 S-Bus
> card.

You might recall this, but your information is outdated. This is from my
Ultra 1E (actually, an Ultra 1E Creator 3D):
root at ultra1# dmesg | grep esp
esp0: <Sun FAS366 Fast-Wide SCSI> mem
0x8810000-0x881003f,0x8800000-0x880000f irq 2016 on sbus0 esp0:
[GIANT-LOCKED] esp0: FAS366/HME, 40MHz, SCSI ID 7
da0 at esp0 bus 0 target 0 lun 0
root at ultra1# dmesg | grep da
da0 at esp0 bus 0 target 0 lun 0
da0: <IBM IC35L036UCDY10-0 S29A> Fixed Direct Access SCSI-3 device 
da0: 20.000MB/s transfers (10.000MHz, offset 15, 16bit), Tagged Queueing
Enabled da0: 35003MB (71687340 512 byte sectors: 255H 63S/T 4462C)
Mounting root from ufs:/dev/da0a
root at ultra1# uname -a
FreeBSD ultra1.kg4.no 5.3-STABLE FreeBSD 5.3-STABLE #0: Fri Nov  5
11:19:39 CET 2004     root at ultra1.kg4.no:/usr/obj/usr/src/sys/ULTRA1E 
sparc64

I first installed 5.3-BETA7 on it, so the SCSI controller have been
supported at least since then.
-- 
Regards,
Torfinn Ingolfsen,
Norway