tftp loader

Arthur tuur at tuur.biz
Wed Apr 28 10:01:51 PDT 2004


I fixed the previous problem by loading the kernel over NFS.
There seems to be some problem with loading the kernel over TFTP.
But now; I get this error:

---SNIP----
isa0: <ISA bus> on isab0
pci0: <old, non-VGA display device> at device 3.0 (no driver attached)
pci0: <network, ethernet> at device 10.0 (no driver attached)
pci0: <network, ethernet> at device 11.0 (no driver attached)
atapci0: <AcerLabs Aladdin UDMA100 controller> port
0x920-0x92f,0x908-0x90b,0x91
0-0x917,0x918-0x91b,0x900-0x907 at device 13.0 on pci0
atapci0: [MPSAFE]
ata2: at 0x900 on atapci0
ata2: [MPSAFE]
IOMMU fault virtual address 0xc3018000
panic: pcib: uncorrectable DMA error AFAR 0x6d6060 AFSR 0x210000ff80000000
cpuid = 0;
Uptime: 1s
Automatic reboot in 15 seconds - press a key on the console to abort
Rebooting...
Resetting ...


Any ideas?

----- Original Message ----- 
From: "Arthur" <tuur at tuur.biz>
To: <freebsd-sparc64 at freebsd.org>
Sent: Wednesday, April 28, 2004 4:50 PM
Subject: Re: tftp loader


>
> Thanks again!
> I got the loader working... Or at least, I got the tftp part and the bootp
> thing working...
> But now I have this problem:
>
> (Copied and pasted the output of my terminal screen below)
>
> -----------------------------------------------
> Sun Serverblade1 (UltraSPARC-IIe 650MHz), No Keyboard
> Copyright 1998-2002 Sun Microsystems, Inc.  All rights reserved.
> OpenBoot  4.7.5, 1024 MB memory installed, Serial #xx.
> Ethernet address xx, Host ID: xx
>
> Rebooting with command: boot net
> Boot device: /pci at 1f,0/network at a  File and args:
> 1000 Mbps FDXLink up
> 37a00
> Server IP address: xx
> Client IP address: xx
> Console: OpenFirmware console
>
> FreeBSD/sparc64 bootstrap loader, Revision 1.0
> (root at sparkle.attlabs.net, Thu Jun  5 00:18:44 GMT 2003)
> bootpath="/pci at 1f,0/network at a"
> boot: ethernet address: xx
> 1000 Mbps FDXLink up
> net_open: server addr: xxxx
> net_open: server path: /tftpboot
> Loading /boot/defaults/loader.conf
> /Fast Data Access MMU Miss
> ok
>
> -----------------------------------------------
>
> The spinning '|\-/|' sign does spin, but it does it very (very) slowly.
> Can anybody help? (Or at least point me in the right direction...)
> I tried both the 5.2.1 and the 5.1 release.
>
> Regards,
>
>
> Arthur
>
>
> ----- Original Message ----- 
> From: "Joerg Wunsch" <j at ida.interface-business.de>
> To: "Arthur" <tuur at tuur.biz>
> Cc: <freebsd-sparc64 at freebsd.org>
> Sent: Wednesday, April 28, 2004 11:55 AM
> Subject: Re: tftp loader
>
>
> > As Arthur wrote:
> >
> > > Thanks!
> > > Now i'm looking for the 'distrib.tar.gz' file....
> >
> > I simply downloaded the Mini-ISO, and mounted that on the server
> > machine.  I got my E450 installed that way.
> > -- 
> > J"org Wunsch        Unix support engineer
> > joerg_wunsch at interface-systems.de
> http://www.interface-systems.de/~j/
> >
> >
>
> _______________________________________________
> freebsd-sparc64 at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-sparc64
> To unsubscribe, send any mail to "freebsd-sparc64-unsubscribe at freebsd.org"
>
>



More information about the freebsd-sparc64 mailing list