Ultra 5 ethernet not pushing packets.

[David Gilbert]

I have an Ultra 5 with an hme0 on the motherboard and an hme1 on the
same PCI card as a SCSI controller.  I just loaded FreeBSD on it to
see it everything's working.

When I try to ifconfig either hme, they don't ping other machines on
the net... but the switch shows 100megabit full duplex link.  Here are
the dmesg probes:

hme0: <Sun HME 10/100 Ethernet> mem 0x2800000-0x2807fff irq 17 at device 0.1 on pci3
hme0: Ethernet address: 08:00:20:a0:6f:0f
miibus0: <MII bus> on hme0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isp0: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x1000-0x10ff mem 0x2808000-0x2808fff irq 16 at device 4.0 on pci3
isp0: invalid NVRAM header
pcib3: <APB PCI-PCI bridge> at device 1.1 on pci0
pci2: <PCI bus> on pcib3
ebus0: revision 0x01
ebus0: <PCI-EBus2 bridge> mem 0xf1000000-0xf17fffff,0xf0000000-0xf0ffffff at device 1.0 on pci2
ebus0: <SUNW,pll> addr 0x1400504000-0x1400504002 (no driver attached)
sab0: <Siemens SAB 82532 v3.2> addr 0x1400400000-0x140040007f irq 43 on ebus0
sabtty0: <ttya> on sab0
sabtty0: console 9600,8,n,1,-
sabtty1: <ttyb> on sab0
ebus0: <su> addr 0x14003083f8-0x14003083ff irq 41 (no driver attached)
ebus0: <su> addr 0x14003062f8-0x14003062ff irq 42 (no driver attached)
ebus0: <ecpp> addr 0x1400700000-0x140070000f,0x140030015c-0x140030015d,0x14003043bc-0x14003043cb irq 34 (no driver attached)
ebus0: <fdthree> addr 0x1400720000-0x1400720003,0x1400706000-0x140070600f,0x14003023f0-0x14003023f7 irq 39 (no driver attached)
eeprom0: <EBus EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0
eeprom0: model mk48t59
eeprom0: hostid 80a06f0f
ebus0: <flashprom> addr 0x1000000000-0x10000fffff (no driver attached)
ebus0: <SUNW,CS4231> addr 0x1400722000-0x1400722003,0x1400704000-0x140070400f,0x1400702000-0x140070200f,0x1400200000-0x14002000ff irq 36,35 (no driver attached)
hme1: <Sun HME 10/100 Ethernet> mem 0xe0000000-0xe0007fff irq 33 at device 1.1 on pci2
hme1: Ethernet address: 08:00:20:a0:6f:0f
miibus1: <MII bus> on hme1
nsphy1: <DP83840 10/100 media interface> on miibus1
nsphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto

Dave.

-- 
============================================================================
|David Gilbert, Velocet Communications.       | Two things can only be     |
|Mail:       dgilbert at velocet.net             |  equal if and only if they |
|http://daveg.ca                              |   are precisely opposite.  |
=========================================================GLO================