From tarkhil at webmail.sub.ru  Sun Oct 11 00:03:58 2009
From: tarkhil at webmail.sub.ru (Alex Povolotsky)
Date: Sun Oct 11 00:04:21 2009
Subject: 6.2-RELEASE does not use second CPU on pentium D
Message-ID: <462F15B4.4010201@webmail.sub.ru>

Hello!

I have a Pentium D box, running 6.2-RELEASE. In dmesg, I see CPU#1 
launched, but I never see any process running on it, and mptable shows

cluster-one# mptable -verbose

===============================================================================

MPTable

 looking for EBDA pointer @ 0x040e, found, searching EBDA @ 0x0009e800
 searching CMOS 'top of mem' @ 0x0009e400 (633K)
 searching default 'top of mem' @ 0x0009fc00 (639K)
 searching BIOS @ 0x000f0000

 MP FPS found in BIOS @ physical addr: 0x000fe200

-------------------------------------------------------------------------------

MP Floating Pointer Structure:

  location:                     BIOS
  physical address:             0x000fe200
  signature:                    '_MP_'
  length:                       16 bytes
  version:                      1.4
  checksum:                     0x9f
  mode:                         Virtual Wire

-------------------------------------------------------------------------------

MP Config Table Header:

  physical address:             0x000fe210
  signature:                    'PCMP'
  base table length:            64
  version:                      1.4
  checksum:                     0x7f
  OEM ID:                       ''
  Product ID:                   ''
  OEM table pointer:            0x00000000
  OEM table size:               0
  entry count:                  1
  local APIC address:           0xfee00000
  extended table length:        0
  extended table checksum:      0

-------------------------------------------------------------------------------

MP Config Base Table Entries:

--
Processors:     APIC ID Version State           Family  Model   Step    
Flags
                 0       0x14    BSP, usable     15      6       4       
0xbfebfbff

===============================================================================

while in dmesg

Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE-p3 #2: Thu Apr 19 00:19:54 MSD 2007
    tarkhil@cluster-one.zinester.com:/usr/obj/usr/src/sys/P4D
WARNING: debug.mpsafenet forced to 0 as ipsec requires Giant
WARNING: MPSAFE network stack disabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) D CPU 2.80GHz (2808.41-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf64  Stepping = 4
  
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH
,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe49d<SSE3,RSVD2,MON,DS_CPL,EST,CNTX-ID,CX16,<b14>,<b15>>
  AMD Features=0x20100000<NX,LM>
  AMD Features2=0x1<LAHF>
real memory  = 1046757376 (998 MB)
avail memory = 1015095296 (968 MB)
ACPI APIC Table: <INTEL  DG965SS >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard

[...]
SMP: AP CPU #1 Launched!

The kernel is, of course, SMP.

What can I do, where can I search for solution?

Second core IS enabled in BIOS
cluster-one# sysctl hw | grep cpu
hw.ncpu: 2
hw.acpi.cpu.cx_supported: C1/0
hw.acpi.cpu.cx_lowest: C1
hw.acpi.cpu.cx_usage: 100.00%
cluster-one# sysctl machdep | grep cpu
machdep.cpu_idle_hlt: 1
machdep.hlt_cpus: 2
machdep.hlt_logical_cpus: 0
machdep.logical_cpus_mask: 2

so second CPU is halted, attempt to start it with sysctl does not help
Alex.


_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"
From killing at multiplay.co.uk  Sun Oct 11 01:53:59 2009
From: killing at multiplay.co.uk (Steven Hartland)
Date: Sun Oct 11 01:54:18 2009
Subject: 6.2-RELEASE does not use second CPU on pentium D
References: <462F15B4.4010201@webmail.sub.ru>
Message-ID: <261B324A16A2457899A46641FC6A0499@multiplay.co.uk>

6.2 is really quite old now, does 7.x or even 8.x work?

    Regards
    Steve
----- Original Message ----- 
From: "Alex Povolotsky" <tarkhil@webmail.sub.ru>

> I have a Pentium D box, running 6.2-RELEASE. In dmesg, I see CPU#1 
> launched, but I never see any process running on it, and mptable shows
...

================================================
This e.mail is private and confidential between Multiplay (UK) Ltd. and the person or entity to whom it is addressed. In the event of misdirection, the recipient is prohibited from using, copying, printing or otherwise disseminating it or any information contained in it. 

In the event of misdirection, illegible or incomplete transmission please telephone +44 845 868 1337
or return the E.mail to postmaster@multiplay.co.uk.

From jhb at freebsd.org  Tue Oct 13 14:42:15 2009
From: jhb at freebsd.org (John Baldwin)
Date: Tue Oct 13 14:42:33 2009
Subject: 6.2-RELEASE does not use second CPU on pentium D
In-Reply-To: <462F15B4.4010201@webmail.sub.ru>
References: <462F15B4.4010201@webmail.sub.ru>
Message-ID: <200910131040.55465.jhb@freebsd.org>

On Wednesday 25 April 2007 4:47:48 am Alex Povolotsky wrote:
> Hello!
> 
> I have a Pentium D box, running 6.2-RELEASE. In dmesg, I see CPU#1 
> launched, but I never see any process running on it, and mptable shows
> 
> cluster-one# mptable -verbose
> 
> 
===============================================================================
> 
> MPTable
> 
>  looking for EBDA pointer @ 0x040e, found, searching EBDA @ 0x0009e800
>  searching CMOS 'top of mem' @ 0x0009e400 (633K)
>  searching default 'top of mem' @ 0x0009fc00 (639K)
>  searching BIOS @ 0x000f0000
> 
>  MP FPS found in BIOS @ physical addr: 0x000fe200
> 
> -------------------------------------------------------------------------------
> 
> MP Floating Pointer Structure:
> 
>   location:                     BIOS
>   physical address:             0x000fe200
>   signature:                    '_MP_'
>   length:                       16 bytes
>   version:                      1.4
>   checksum:                     0x9f
>   mode:                         Virtual Wire
> 
> -------------------------------------------------------------------------------
> 
> MP Config Table Header:
> 
>   physical address:             0x000fe210
>   signature:                    'PCMP'
>   base table length:            64
>   version:                      1.4
>   checksum:                     0x7f
>   OEM ID:                       ''
>   Product ID:                   ''
>   OEM table pointer:            0x00000000
>   OEM table size:               0
>   entry count:                  1
>   local APIC address:           0xfee00000
>   extended table length:        0
>   extended table checksum:      0
> 
> -------------------------------------------------------------------------------
> 
> MP Config Base Table Entries:
> 
> --
> Processors:     APIC ID Version State           Family  Model   Step    
> Flags
>                  0       0x14    BSP, usable     15      6       4       
> 0xbfebfbff
> 
> 
===============================================================================
> 
> while in dmesg
> 
> Copyright (c) 1992-2007 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>         The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 6.2-RELEASE-p3 #2: Thu Apr 19 00:19:54 MSD 2007
>     tarkhil@cluster-one.zinester.com:/usr/obj/usr/src/sys/P4D
> WARNING: debug.mpsafenet forced to 0 as ipsec requires Giant
> WARNING: MPSAFE network stack disabled, expect reduced performance.
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Pentium(R) D CPU 2.80GHz (2808.41-MHz 686-class CPU)
>   Origin = "GenuineIntel"  Id = 0xf64  Stepping = 4
>   
> 
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH
> ,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>   Features2=0xe49d<SSE3,RSVD2,MON,DS_CPL,EST,CNTX-ID,CX16,<b14>,<b15>>
>   AMD Features=0x20100000<NX,LM>
>   AMD Features2=0x1<LAHF>
> real memory  = 1046757376 (998 MB)
> avail memory = 1015095296 (968 MB)
> ACPI APIC Table: <INTEL  DG965SS >
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
>  cpu0 (BSP): APIC ID:  0
>  cpu1 (AP): APIC ID:  1
> ioapic0: Changing APIC ID to 2
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> 
> [...]
> SMP: AP CPU #1 Launched!
> 
> The kernel is, of course, SMP.
> 
> What can I do, where can I search for solution?
> 
> Second core IS enabled in BIOS
> cluster-one# sysctl hw | grep cpu
> hw.ncpu: 2
> hw.acpi.cpu.cx_supported: C1/0
> hw.acpi.cpu.cx_lowest: C1
> hw.acpi.cpu.cx_usage: 100.00%
> cluster-one# sysctl machdep | grep cpu
> machdep.cpu_idle_hlt: 1
> machdep.hlt_cpus: 2
> machdep.hlt_logical_cpus: 0
> machdep.logical_cpus_mask: 2
> 
> so second CPU is halted, attempt to start it with sysctl does not help
> Alex.

What does 'sysctl machdep | grep hyper' show?

-- 
John Baldwin
From asientrade at freenet.de  Thu Oct 15 13:43:45 2009
From: asientrade at freenet.de (daniel)
Date: Thu Oct 15 13:43:54 2009
Subject: Twitter-endlich Geldverdienen-kostenlos und sofort startklar
Message-ID: <200910151544009CAFB62284$18011D7F2B@DANIELPC>

 

  

  ?Offers stand below as an English available  Hallo-
??????????????????????????????????????? verdiene endlich Geld durch 
Twitterwenn ein Twitter Account vorhanden sein sollte dann gehts sofort los 
mit Verdienen.sollte keine Account vorhanden sein dann einfach alles 
kostenlos erstellen und verdienen.?mit besten Empfehlungen eure 
Danielleichter kann man sein ?Geld nicht verdienen- alles kostenlos wenn 
sie einen Twitteraccount haben.Also schnell handel-bei weiterem Interesse 
und lust an gratis produkten einfach kurz anmelden-oder abmelden--
danke??Anmelden?????? ?Abmelden?24 Std. Blitzangebot?nur begrenzt f?r?24 
Stunden aktiv danach ausverkauft---
http://www.affiliateverkaufen.de/blitzangebot.html???? 10,-?(The Logo 
Creator hilft beim Erstellen qualitativ hochwertiger Logos. Ganz nach dem 
Motto "Your Logo is your business" gestaltet der Nutzer mit diesem Programm 
Blickf?nger f?r Webseiten)?(?bersetzen Sie ganz einfach und mit wenigen 
Klicks Texte oder sogar komplette Webseiten in 31 Sprachen. )nur 28,-??oder 
Aktionspreis 30,-??? f?r Logocreator v5 und PDF-Converter 6.0 dt.?Oder 
m?chten sie lieber effektiv heute noch Geld verdienen und Zahlungen wenn 
m?glich sofort erwirtschaften-??
dann mit diesem angebot was f?r mich selbstbehauptet das beste ?berhaupt 
war und ist--Geld durch Emails verdienen-aber keine centbetr?ge sondern sofort
10-20,-? sofort-zahlung innerhalb weniger minuten, ich habe zur zeit 
zwischen 5 und 20 Kunden pro tag (weltweit) bei einem verdienst pro email 
von ca. 15,-? 
und ich betreibe keinerlei werbung oder verkaufe durchs telefon nein die 
Kunden kommen zu mir und ich verdiene sehr gut-aber lesen sie selbst wenn 
ihr interesse noch vorhanden ist weiter im Angebot 2.erfolgreiches Handeln 
w?nsche ich auf diesem Wege-bei weiteren Interessen k?nnen sie 
sichwiederholt eintragen um weitere Angebote und Gratis Geschenke zu 
erhalten........................(oder Abmelden)....  Anmelden???? Abmelden 
?Hello- finally earn money by Twitterthen immediately feels wrong with 
earning if a Twitter account should be available. no-one should account be 
available simply then everything free of charge make and earn.  with best 
recommendations yours Danielone can more easily money not earning 
everything be ' free if they have a Twitteraccount. -therefore act fast 
simply registering or cancelling at broader interest and desire at free 
products briefly, thank youBookingCancelling24 hour lightning supply?sold 
off according to that actively for 24 hours only restrictedly -  
http://www.affiliateverkaufen.de/blitzangebot.html 10. ? (A The logo 
Creator helps to make high-quality logos. According to the motto "Your logo 
is your business" the user completely forms with this programme eye-catcher 
for web pages.)  ? (Translate texts or even complete web pages for only 
simply and a few clicks into 31 languages.) only 28. ?  or special-offer 
price 30. ? for Logocreator v5 and PDF-Converter of 6.0 dt.  -or they would 
rather, today, still earn money effectively and immediately gain payments 
if possible? 
with this supply did but no cent amounts what was self claimed for me the 
best at all and is? 
I have 10-20,- ? immediately payment within less minutes, between 5 and 20 
customers per day (worldwide) at an income per e-mail from approx. 15. ? at 
the moment 
by the telephone the customers no come to me and I earn very well and I 
operate no advertising or sell but read them even if their interest is 
still further existing in the supply 2. Angebot 2.I wish on this at broader 
interests be able to do them himself a successful action waystyping 
repeated ........................ in to receive further offers and free 
presents. (or cancel ) .....  Booking? Cancelling????