have a smp with scsi problem
wu wei
logout.wuwei at gmail.com
Tue Aug 17 22:29:35 PDT 2004
i installed freebsd4.9 on my server. but if i open SMP on kernel
. boot have an error " SCSI bus reset delivered,0 scbs aborted "
scsi : Adaptec aic7892 Ultra160
i need help .
thank u
freebsd4.9# dmesg
Timecounter "i8254" frequency 1193182 Hz
CPU: Intel(R) Pentium(R) III CPU - S 1266MHz (1262.68-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6b4 Stepping = 4
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 1073676288 (1048512K bytes)
avail memory = 1039343616 (1014984K bytes)
Preloaded elf kernel "kernel" at 0xc056b000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 9 entries at 0xc00fdf30
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
fxp0: <Intel 82559 Pro/100 Ethernet> port 0x1800-0x183f mem
0xfb000000-0xfb0fffff,0xfb100000-0xfb100fff irq 10 at device 7.0 on
pci0
fxp0: Ethernet address 00:c0:9f:17:f1:ff
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: <Intel 82559 Pro/100 Ethernet> port 0x1840-0x187f mem
0xfb200000-0xfb2fffff,0xfb101000-0xfb101fff irq 7 at device 9.0 on
pci0
fxp1: Ethernet address 00:c0:9f:17:f1:fe
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ahc0: <Adaptec aic7892 Ultra160 SCSI adapter> port 0x1000-0x10ff mem
0xfb102000-0xfb102fff irq 5 at device 11.0 on pci0
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
pci0: <ATI Mach64-GR graphics accelerator> at 12.0 irq 11
isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 ATA33 controller> port 0x1880-0x188f at
device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xfb104000-0xfb104fff irq 9
at device 15.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pcib1: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
pci1: <PCI bus> on pcib1
orm0: <Option ROMs> at iomem
0xc0000-0xc7fff,0xe0000-0xe3fff,0xe4000-0xe5fff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: parallel port not found.
IP packet filtering initialized, divert disabled, rule-based
forwarding enabled, default to accept, logging limited to 100
packets/entry by default
acd0: CDROM <MATSHITA CR-177> at ata0-master PIO4
Waiting 15 seconds for SCSI devices to settle
pass1 at ahc0 bus 0 target 8 lun 0
pass1: <SDR GEM318 0> Fixed Processor SCSI-2 device
pass1: 3.300MB/s transfers
da0 at ahc0 bus 0 target 0 lun 0
da0: <QUANTUM ATLAS10K3_18_SCA 020W> Fixed Direct Access SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged
Queueing Enabled
da0: 17537MB (35916548 512 byte sectors: 255H 63S/T 2235C)
Mounting root from ufs:/dev/da0s1a
freebsd4.9# mptable
===============================================================================
MPTable, version 2.0.15
-------------------------------------------------------------------------------
MP Floating Pointer Structure:
location: BIOS
physical address: 0x000f7ab0
signature: '_MP_'
length: 16 bytes
version: 1.4
checksum: 0x2b
mode: Virtual Wire
-------------------------------------------------------------------------------
MP Config Table Header:
physical address: 0x0009fc70
signature: 'PCMP'
base table length: 308
version: 1.4
checksum: 0xd9
OEM ID: 'Quanta '
Product ID: 'SU2 '
OEM table pointer: 0x00000000
OEM table size: 0
entry count: 30
local APIC address: 0xfee00000
extended table length: 140
extended table checksum: 103
-------------------------------------------------------------------------------
MP Config Base Table Entries:
--
Processors: APIC ID Version State Family Model Step Flags
1 0x11 BSP, usable 6 11 4
0x383fbff
0 0x11 AP, usable 6 11 4
0x383fbff
--
Bus: Bus ID Type
0 PCI
1 PCI
2 ISA
--
I/O APICs: APIC ID Version State Address
2 0x11 usable 0xfec00000
3 0x11 usable 0xfec01000
--
I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
INT active-hi edge 2 0 2 0
INT active-hi edge 2 1 2 1
INT active-hi edge 2 2 2 2
INT active-hi edge 2 3 2 3
INT active-hi edge 2 4 2 4
INT active-lo level 2 5 2 5
INT active-hi edge 2 6 2 6
INT active-lo level 2 7 2 7
INT active-hi edge 2 8 2 8
INT active-lo level 2 9 2 9
INT active-lo level 2 10 2 10
INT active-lo level 2 11 2 11
INT active-hi edge 2 12 2 12
INT active-hi edge 2 13 2 13
INT active-hi edge 2 14 2 14
INT active-hi edge 2 15 2 15
INT active-lo level 0 7:A 3 4
INT active-lo level 0 9:A 3 5
INT active-lo level 0 11:A 3 8
INT active-lo level 0 12:A 3 9
INT active-lo level 0 15:A 2 9
--
Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
ExtINT active-hi edge 2 0 255 0
NMI active-hi edge 0 0:A 255 1
-------------------------------------------------------------------------------
MP Config Extended Table Entries:
--
System Address Space
bus ID: 0 address type: I/O address
address base: 0x0
address range: 0x10000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0x40000000
address range: 0xbee00000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xfee01000
address range: 0x11ff000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xa0000
address range: 0x20000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xd0000
address range: 0x10000
--
Bus Heirarchy
bus ID: 2 bus info: 0x01 parent bus ID: 0
--
Compatibility Bus Address
bus ID: 0 address modifier: add
predefined range: 0x00000000
--
Compatibility Bus Address
bus ID: 0 address modifier: add
predefined range: 0x00000001
--
Compatibility Bus Address
bus ID: 1 address modifier: subtract
predefined range: 0x00000000
--
Compatibility Bus Address
bus ID: 1 address modifier: subtract
predefined range: 0x00000001
===============================================================================
freebsd4.9# pciconf
chip0 at pci0:0:0: class=0x060000 card=0x00000000 chip=0x00091166 rev=0x06 hdr=0x00
chip1 at pci0:0:1: class=0x060000 card=0x00000000 chip=0x00091166 rev=0x06 hdr=0x00
fxp0 at pci0:7:0: class=0x020000 card=0x8917152d chip=0x12298086 rev=0x08 hdr=0x00
fxp1 at pci0:9:0: class=0x020000 card=0x8917152d chip=0x12298086 rev=0x08 hdr=0x00
ahc0 at pci0:11:0: class=0x010000 card=0x8917152d chip=0x008f9005 rev=0x02 hdr=0x00
none0 at pci0:12:0: class=0x030000 card=0x00081002 chip=0x47521002
rev=0x27 hdr=0x00
isab0 at pci0:15:0: class=0x060100 card=0x02001166 chip=0x02001166
rev=0x50 hdr=0x00
atapci0 at pci0:15:1: class=0x01018a card=0x00000000 chip=0x02111166
rev=0x00 hdr=0x00
ohci0 at pci0:15:2: class=0x0c0310 card=0x02201166 chip=0x02201166
rev=0x04 hdr=0x00
More information about the freebsd-smp
mailing list