From setantae at submonkey.net  Sun Nov  2 08:02:27 2003
From: setantae at submonkey.net (Ceri Davies)
Date: Sun Nov  2 08:03:54 2003
Subject: Updted SMP web page
In-Reply-To: <20031101032952.GA60416@crodrigues.org>
References: <20031101032952.GA60416@crodrigues.org>
Message-ID: <20031102160220.GK38355@submonkey.net>

On Fri, Oct 31, 2003 at 10:29:52PM -0500, Craig Rodrigues wrote:
> Hi,
> 
> I thought that the following paper about SMPng
> was well written, and should be placed on the FreeBSD
> SMP web page.

Committed (with some whitespace changes); thanks.

Ceri

-- 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 187 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-smp/attachments/20031102/c70ec8ea/attachment.bin
From rwatson at freebsd.org  Sun Nov  2 09:28:14 2003
From: rwatson at freebsd.org (Robert Watson)
Date: Sun Nov  2 09:28:46 2003
Subject: Update to SMP web page
In-Reply-To: <20031031235905.GA5491@crodrigues.org>
Message-ID: <Pine.NEB.3.96L.1031102122236.12038E-100000@fledge.watson.org>


On Fri, 31 Oct 2003, Craig Rodrigues wrote:

> I found about about this paper at http://daily.daemonnews.org .  I
> thought that this paper was well done, and should be put on the FreeBSD
> SMP web page. 

The paper (for better or for worse) is a rehash of a 2001 paper, and
doesn't take a lot of the more recent work into account -- for example,
the substantial performance improvements since that time realized through
use of UMA, VM system lockdown, migration to a Giant-free storage
subsystem, network stack locking, etc.  It also omits ongoing research
into SMP-optimized scheduling, hyperthreading, et al.  So it's a good
historical reference to early parts of the SMPng work, but doesn't take
into account a lot of the work since that time.  We should be careful,
when linking to and publicizing this paper, to make sure this is clearly
pointed out.

Robert N M Watson             FreeBSD Core Team, TrustedBSD Projects
robert@fledge.watson.org      Network Associates Laboratories

> 
> 
> 
> 
> Index: index.sgml
> ===================================================================
> RCS file: /home/ncvs/www/en/smp/index.sgml,v
> retrieving revision 1.111
> diff -u -r1.111 index.sgml
> --- index.sgml	4 Oct 2003 16:19:43 -0000	1.111
> +++ index.sgml	31 Oct 2003 23:50:11 -0000
> @@ -1789,6 +1789,16 @@
>  	<li> <p>  </p> </li>
>  </ul>
>  -->
> +    <b>30 October 2003</b>
> +    <ul>
> +      <li>
> +      <p>&a.grog; submitted a <a href =
> +        "http://www.lemis.com/grog/SMPng/Singapore/"> FreeBSD SMPng paper</a> 
> +        to the <a href="http://www.aeosc.org/">
> +        Asian Enterprise Open Source Conference</a> in Singapore.</p>
> +      </li>
> +    </ul>
> +
>      <b>13 January 2002</b>
>      <ul>
>        <li>
> 
> 
> 
> 
> -- 
> Craig Rodrigues        
> http://crodrigues.org
> rodrigc@crodrigues.org
> _______________________________________________
> freebsd-smp@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-smp
> To unsubscribe, send any mail to "freebsd-smp-unsubscribe@freebsd.org"
> 

From jhb at FreeBSD.org  Mon Nov  3 15:41:45 2003
From: jhb at FreeBSD.org (John Baldwin)
Date: Mon Nov  3 15:44:13 2003
Subject: HEADSUP: Committing new interrupt code, tree will be broken
In-Reply-To: <XFMail.20031103182908.jhb@FreeBSD.org>
Message-ID: <XFMail.20031103184117.jhb@FreeBSD.org>


On 03-Nov-2003 John Baldwin wrote:
> 
> On 03-Nov-2003 John Baldwin wrote:
>> I'm committing the new i386 interrupt and SMP code, so buckle your
>> seat belts. :)  I'll be intentionally breaking the kernel build at
>> the start and re-enable it with the last commit when I am done.
> 
> I've finished committing everything but am waiting for some kernel
> compiles on virgin trees to finish to make sure I didn't miss anything.
> The -current waters should be safe again though.

My GENERIC build finished ok, so it should at least be workable for
most people.  By the way, if anyone has a machine with 8 or more CPUs
(John Cagle, I know you are out there. :)) feel free to test the new
code out and post a boot -v dmesg log to the smp@ list.  Thanks.

-- 

John Baldwin <jhb@FreeBSD.org>  <><  http://www.FreeBSD.org/~jhb/
"Power Users Use the Power to Serve!"  -  http://www.FreeBSD.org/
From is at rambler-co.ru  Tue Nov  4 04:12:35 2003
From: is at rambler-co.ru (Igor Sysoev)
Date: Tue Nov  4 04:13:07 2003
Subject: can not boot SMP kernel on GA-8EGXDR-E
In-Reply-To: <Pine.BSF.4.21.0310301606530.38366-100000@is.park.rambler.ru>
Message-ID: <Pine.BSF.4.21.0311041510090.804-100000@is.park.rambler.ru>

On Thu, 30 Oct 2003, Igor Sysoev wrote:

> I can not boot SMP kernel on GA-8EGXDR-E motherboard in
> Gigabyte GS-SR222E server - it hangs on SCSI disks after CPUs launched:

I've just cvsup'ed new APIC code and booted 5.1 SMP kernel.
Thank you John!


Igor Sysoev
http://sysoev.ru/en/

From jesse at wingnet.net  Wed Nov  5 09:10:26 2003
From: jesse at wingnet.net (Jesse Guardiani)
Date: Wed Nov  5 09:10:59 2003
Subject: SMPng question
Message-ID: <boba8u$7f2$1@sea.gmane.org>

Howdy list,

I have a few questions about FreeBSD's in-progress
SMPng project. I've read much of the literature on
the FreeBSD site about SMPng, and I've taken the time
to go through the project status pages and look at the
work that has already been done and the work yet to be
done here:

    http://www.freebsd.org/smp/index.html
    http://www.freebsd.org/projects/busdma/index.html

But I'm still unclear about a few things:

1.) What, exactly, are SMPng's advantages over the current
    SMP implementation as related to userland apps?

    In other words, I know that the network stack and devices
    and such will benefit by being able to make use of
    multiple CPUs, but will normal non-multi-threaded apps
    be able to use multiple CPUs? Or will an app still have
    to be multi-threaded in order to take full advantage
    of an SMP box?

2.) And, perhaps as an extension to question #1: Will I
    be able to make use of multiple CPUs to compile programs?

    Could I buy one of those cheap $300 quad Xeon 500mhz
    compaq boxes on ebay and use it as a 2 Ghz compiler box?

Thanks!

-- 
Jesse Guardiani, Systems Administrator
WingNET Internet Services,
P.O. Box 2605 // Cleveland, TN 37320-2605
423-559-LINK (v)  423-559-5145 (f)
http://www.wingnet.net


From pieckiel at sdf.lonestar.org  Wed Nov  5 09:44:47 2003
From: pieckiel at sdf.lonestar.org (Kevin A. Pieckiel)
Date: Wed Nov  5 09:45:29 2003
Subject: SMPng question
In-Reply-To: <boba8u$7f2$1@sea.gmane.org>
References: <boba8u$7f2$1@sea.gmane.org>
Message-ID: <20031105174438.GA8014@SDF.LONESTAR.ORG>

On Wed, Nov 05, 2003 at 11:59:02AM -0500, Jesse Guardiani wrote:
> 1.) What, exactly, are SMPng's advantages over the current
>     SMP implementation as related to userland apps?
> 
>     In other words, I know that the network stack and devices
>     and such will benefit by being able to make use of
>     multiple CPUs, but will normal non-multi-threaded apps
>     be able to use multiple CPUs? Or will an app still have
>     to be multi-threaded in order to take full advantage
>     of an SMP box?

I'm sure others can comment more thoroughly on this than I can,
but basically non-threaded processes won't concurrently use
multiple CPUs.  Afterall, they aren't threaded.  But multiple
non-threaded processes can run concurrently.  One of the larger
differences in this type of scenario will be when system calls
are made by userland apps.  With Giant, there is more contention
for kernel resources, but with SMPng, this has been greatly
relieved.  This is where you can see some performance gains.


> 2.) And, perhaps as an extension to question #1: Will I
>     be able to make use of multiple CPUs to compile programs?

Yes, but only if you have multiple sources to compile.  You're
Hello World program won't compile any faster, but I'd imagine
anything susceptible to concurrent compiling (using -j with
make, for example) would see a benefit.  However, this scenario
is just a specific example of #1 above--multiple non-threaded
programs (gcc in this case) running concurrently.


>     Could I buy one of those cheap $300 quad Xeon 500mhz
>     compaq boxes on ebay and use it as a 2 Ghz compiler box?

No, not really; you're going to lose some performance in just
keeping up with multiple processors.  In other words, it's not
a linear increase in performance when you add processors.
However, if you have up to four things to actively do at the
same time, then a quad Xeon computer will probably benefit you.
Running a web and/or mail server, for example, where you have
concurrent processes handling concurrent connections, is a
good example.  Running your favorite word processor while
crunching WAV's to MP3's, probably.  You'll notice less of
a response-time lag over a single processor computer at the
very least.  Checking your E-Mail while browsing the Internet,
you'll probably not notice anything different, and a single
processor 2.0 GHz computer will probably be faster.

Kevin
From jesse at wingnet.net  Wed Nov  5 11:20:19 2003
From: jesse at wingnet.net (Jesse Guardiani)
Date: Wed Nov  5 11:21:19 2003
Subject: SMPng question
References: <boba8u$7f2$1@sea.gmane.org>
	<20031105174438.GA8014@SDF.LONESTAR.ORG>
Message-ID: <bobihd$tvi$1@sea.gmane.org>

Kevin A. Pieckiel wrote:

[...]

>>     Could I buy one of those cheap $300 quad Xeon 500mhz
>>     compaq boxes on ebay and use it as a 2 Ghz compiler box?
> 
> No, not really; you're going to lose some performance in just
> keeping up with multiple processors.  In other words, it's not
> a linear increase in performance when you add processors.

OK. That's what I thought. Do you have a figure on the amount
of performance lost managing multiple CPU's?

I'm looking at this from a cost perspective, essentially. Take
These two computers for example:

4 CPU 500Mhz Xeon w/1M cache and 1Gb RAM for $350:
    http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3054734970&category=1484

2.4 Ghz P4 Intel 800FSB (cache size unknown) and 1 GB Ram for $600:
    http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2763877081&category=51139

--------- Ratio Math for Cost ----------
$350                        x
------          *          ---
$600                       100

$35,000         =          $600x

58.33%          =           x
---------- End Ratio Math -------------

So, the 2.4Ghz machine is 58.33% more expensive than the
quad 500Mhz machine. If I could get 60%-70% of the performance
of the 2.4Ghz machine out of quad 500Mhz machine then I'd
consider purchasing the quad 500Mhz machine to be a good
deal, considering cost.

However:

--------- Ratio Math for CPU ----------
2,400 Mhz                  100
------                *    ---
2,000 Mhz (4x500Mhz)        x

200,000               =    2400x

83.33                 =    x
---------- End Ratio Math -------------


As shown by the above ratio math, the quad 500Mhz machine is
only 83.33% as powerful as the 2.4 Ghz UP machine, so the quad
500Mhz machine running SMPng would have to only incur 23.33%-13.33%
operating losses in order to reach my 60%-70% efficiency goal. :)

Anyone have an idea what SMPng per processor loss percentages
are?

The 2.4Ghz machine will probably blow away the quad 500Mhz
machine regardless since it has 400Mhz DDR RAM and an 800Mhz
FSB. Still, it would be really neat to see some benchmarks
on things like this for future decision making.

-- 
Jesse Guardiani, Systems Administrator
WingNET Internet Services,
P.O. Box 2605 // Cleveland, TN 37320-2605
423-559-LINK (v)  423-559-5145 (f)
http://www.wingnet.net


From s.wingate at pobox.com  Wed Nov  5 13:04:06 2003
From: s.wingate at pobox.com (Steve Wingate)
Date: Wed Nov  5 13:05:35 2003
Subject: machdep.hlt_logical_cpus
Message-ID: <20031105125535.B41708@daemon.g-e-e-k.net>

I don't see this as a recognized option in 4.9-STABLE

daemon# uname -a
FreeBSD daemon.g-e-e-k.net 4.9-STABLE FreeBSD 4.9-STABLE #11: Wed Oct 29
13:08:33 PST 2003     root@daemon.g-e-e-k.net:/usr/obj/usr/src/sys/XEON
i386
------------
daemon# sysctl machdep.hlt_logical_cpus=0
sysctl: unknown oid 'machdep.hlt_logical_cpus'

--------------
daemon# dmesg
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.9-STABLE #11: Wed Oct 29 13:08:33 PST 2003
    root@daemon.g-e-e-k.net:/usr/obj/usr/src/sys/XEON
Timecounter "i8254"  frequency 1193182 Hz
CPU: Intel(R) XEON(TM) CPU 1.80GHz (1784.28-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf24  Stepping = 4

Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
  Hyperthreading: 2 logical CPUs
real memory  = 1073676288 (1048512K bytes)
avail memory = 1041297408 (1016892K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard: 2 CPUs
 cpu0 (BSP): apic id:  0, version: 0x00050014, at 0xfee00000
 cpu1 (AP):  apic id:  1, version: 0x00050014, at 0xfee00000
 io0 (APIC): apic id:  2, version: 0x00178020, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc03b4000.
Preloaded elf module "splash_bmp.ko" at 0xc03b409c.
Warning: Pentium 4 CPU: PSE disabled
Pentium Pro MTRR support enabled
md0: Malloc disk
module_register_init: MOD_LOAD (splash_bmp, c03af774, 0) error 2
Using $PIR table, 9 entries at 0xc00fded0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
IOAPIC #0 intpin 19 -> irq 2
IOAPIC #0 intpin 17 -> irq 5
IOAPIC #0 intpin 23 -> irq 10
pci0: <PCI bus> on pcib0
agp0: <Intel 82860 host to AGP bridge> mem 0xe0000000-0xe3ffffff at device
0.0 on pci0
pcib1: <PCI to PCI bridge (vendor=8086 device=2532)> at device 1.0 on pci0
IOAPIC #0 intpin 22 -> irq 11
pci1: <PCI bus> on pcib1
pci1: <ATI model 514c graphics accelerator> at 0.0 irq 11
pcib2: <PCI to PCI bridge (vendor=8086 device=2533)> at device 2.0 on pci0
pci2: <PCI bus> on pcib2
pcib3: <PCI to PCI bridge (vendor=8086 device=1360)> at device 31.0 on
pci2
pci3: <PCI bus> on pcib3
pci3: <unknown card> (vendor=0x8086, dev=0x1161) at 0.0
pcib4: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
IOAPIC #0 intpin 16 -> irq 14
pci4: <PCI bus> on pcib4
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xa000-0xa03f mem
0xe7000000-0xe70fffff,0xe7203000-0xe7203fff irq 5 at device 1.0 on pci4
fxp0: Ethernet address 00:04:ac:23:7b:e1
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sym0: <895> port 0xa400-0xa4ff mem
0xe7201000-0xe7201fff,0xe7200000-0xe72000ff irq 2 at device 3.0 on pci4
sym0: Tekram NVRAM, ID 7, Fast-40, LVD, parity checking
fxp1: <Intel 82559 Pro/100 Ethernet> port 0xa800-0xa83f mem
0xe7100000-0xe71fffff,0xe7202000-0xe7202fff irq 14 at device 4.0 on pci4
fxp1: Ethernet address 00:30:48:22:95:5c
inphy1: <i82555 10/100 media interface> on miibus1
inphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcm0: <Creative EMU10K1> port 0xac00-0xac1f irq 14 at device 7.0 on pci4
pcm0: <TriTech TR28602 AC97 Codec>
isab0: <Intel 82801BA/BAM (ICH2) PCI to LPC bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xd000-0xd01f
irq 2 at device 31.2 on pci0
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <unknown card> (vendor=0x8086, dev=0x2443) at 31.3 irq 5
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xd400-0xd41f
irq 10 at device 31.4 on pci0
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pcm1: <Intel ICH2 (82801BA)> port 0xdc00-0xdc3f,0xd800-0xd8ff irq 5 at
device 31.5 on pci0
pcm1: <Cirrus Logic CS4299 AC97 Codec>
orm0: <Option ROMs> at iomem 0xc0000-0xccfff,0xd0000-0xd1fff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250
sio1: configured irq 3 not in bitmap of probed irqs 0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
Waiting 8 seconds for SCSI devices to settle
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/da0s1a
da1 at sym0 bus 0 target 2 lun 0
da1: <FUJITSU MAN3367MP 0108> Fixed Direct Access SCSI-3 device
da1: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing
Enabled
da1: 35044MB (71771688 512 byte sectors: 255H 63S/T 4467C)
da0 at sym0 bus 0 target 1 lun 0
da0: <SEAGATE ST318451LW 0003> Fixed Direct Access SCSI-3 device
da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing
Enabled
da0: 17501MB (35843671 512 byte sectors: 255H 63S/T 2231C)
cd1 at sym0 bus 0 target 5 lun 0
cd1: <PIONEER DVD-ROM DVD-305 1.03> Removable CD-ROM SCSI-2 device
cd1: 10.000MB/s transfers (10.000MHz, offset 16)
cd1: cd present [200159 x 2048 byte records]
cd0 at sym0 bus 0 target 4 lun 0
cd0: <PLEXTOR CD-R   PX-W124TS 1.06> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 8)
cd0: Attempt to query device size failed: NOT READY, Medium not present -
tray closed
drm0: <ATI Radeon QL R200 8500 LE> port 0xc000-0xc0ff mem
0xe5000000-0xe500ffff,0xd0000000-0xdfffffff irq 11 at device 0.0 on pci1
info: [drm] AGP at 0xe0000000 64MB
info: [drm] Initialized radeon 1.8.0 20020828 on minor 0
info: [drm] Loading R200 Microcode
got bad cookie vp 0xe3d72280 bp 0xcf960fb4

+---------------------------------------------------------------------+
|Steve Wingate		<s_dot_wingate@pobox.com>
|MCSE, CCNA		Wed Nov  5 12:50:00 PST 2003
+---------------------------------------------------------------------+
|FreeBSD 4.9-STABLE
|12:50PM  up 6 days,  4:57, 1 user, load averages: 0.03, 0.01, 0.00
+---------------------------------------------------------------------+
From jhb at FreeBSD.org  Wed Nov  5 14:44:42 2003
From: jhb at FreeBSD.org (John Baldwin)
Date: Wed Nov  5 14:46:31 2003
Subject: SMPng question
In-Reply-To: <boba8u$7f2$1@sea.gmane.org>
Message-ID: <XFMail.20031105174416.jhb@FreeBSD.org>


On 05-Nov-2003 Jesse Guardiani wrote:
> Howdy list,
> 
> I have a few questions about FreeBSD's in-progress
> SMPng project. I've read much of the literature on
> the FreeBSD site about SMPng, and I've taken the time
> to go through the project status pages and look at the
> work that has already been done and the work yet to be
> done here:
> 
>     http://www.freebsd.org/smp/index.html
>     http://www.freebsd.org/projects/busdma/index.html
> 
> But I'm still unclear about a few things:
> 
> 1.) What, exactly, are SMPng's advantages over the current
>     SMP implementation as related to userland apps?
> 
>     In other words, I know that the network stack and devices
>     and such will benefit by being able to make use of
>     multiple CPUs, but will normal non-multi-threaded apps
>     be able to use multiple CPUs? Or will an app still have
>     to be multi-threaded in order to take full advantage
>     of an SMP box?

This is more the realm of the KSE project than SMPng.  KSE aims
to allow multiple threads from the same process to run concurrently
on separate CPUs.  You can get more details about KSE on the threads@
list, but AFAIK it is basically done in current.

> 2.) And, perhaps as an extension to question #1: Will I
>     be able to make use of multiple CPUs to compile programs?
> 
>     Could I buy one of those cheap $300 quad Xeon 500mhz
>     compaq boxes on ebay and use it as a 2 Ghz compiler box?

It won't quite be a 2ghz box, maybe more like a 1.2 or 1.5 ghz box or
so, but for compiles it is faster than a UP box.

-- 

John Baldwin <jhb@FreeBSD.org>  <><  http://www.FreeBSD.org/~jhb/
"Power Users Use the Power to Serve!"  -  http://www.FreeBSD.org/
From john.cagle at hp.com  Thu Nov  6 16:06:14 2003
From: john.cagle at hp.com (Cagle, John (ISS-Houston))
Date: Thu Nov  6 16:07:33 2003
Subject: HEADSUP: Committing new interrupt code, tree will be broken
Message-ID: <C50AB9511EE59B49B2A503CB7AE1ABD106610E7F@cceexc19.americas.cpqcorp.net>

> -----Original Message-----
> From: John Baldwin
>
> My GENERIC build finished ok, so it should at least be workable for
> most people.  By the way, if anyone has a machine with 8 or more CPUs
> (John Cagle, I know you are out there. :)) feel free to test the new
> code out and post a boot -v dmesg log to the smp@ list.  Thanks.

Hi John!

Yes, I'm out here!  ;-)

Attached below is a dmesg from the ProLiant DL560 which has 4 XEON-HTT
processors.  I'll try the 8-way next.  This PAE kernel is from a cvsup
early this morning.

Thanks,
John


Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights
reserved.
FreeBSD 5.1-CURRENT #0: Thu Nov  6 17:36:05 GMT 2003
    root@bigdaddy:/usr/obj/usr/src/sys/PAE
Preloaded elf kernel "/boot/kernel/kernel" at 0xc06fd000.
ACPI APIC Table: <COMPAQ 00000083>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) XEON(TM) MP CPU 1.90GHz (1889.38-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf22  Stepping = 2
 
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE
,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
  Hyperthreading: 2 logical CPUs
real memory  = 9126801408 (8703 MB)
avail memory = 8611352576 (8212 MB)
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
 cpu4 (AP): APIC ID:  4
 cpu5 (AP): APIC ID:  5
 cpu6 (AP): APIC ID:  6
 cpu7 (AP): APIC ID:  7
ioapic0 <Version 1.1> irqs 0-15 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
ioapic2 <Version 1.1> irqs 32-47 on motherboard
ioapic3 <Version 1.1> irqs 48-63 on motherboard
Pentium Pro MTRR support enabled
acpi0: <COMPAQ P30     > on motherboard
    ACPI-1016: *** Info: There are no GPE blocks defined in the FADT
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
pcibios: BIOS version 2.10
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x920-0x923 on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_cpu2: <CPU> on acpi0
acpi_cpu3: <CPU> on acpi0
acpi_cpu4: <CPU> on acpi0
acpi_cpu5: <CPU> on acpi0
acpi_cpu6: <CPU> on acpi0
acpi_cpu7: <CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: _CRS resource entry has unsupported type 14
pci0: <display, VGA> at device 3.0 (no driver attached)
pci0: <base peripheral> at device 4.0 (no driver attached)
pci0: <base peripheral> at device 4.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks CSB5 UDMA100 controller> port
0x2000-0x200f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device
15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: simplex device, DMA on primary only
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <serial bus, USB> at device 15.2 (no driver attached)
pcib1: <ACPI Host-PCI bridge> on acpi0
pci1: <ACPI PCI bus> on pcib1
ciss0: <Compaq Smart Array 5i> port 0x3000-0x30ff mem
0xf7df0000-0xf7df3fff,0xf7ec0000-0xf7efffff irq 30 at device 3.0 on pci1
pcib2: <ACPI Host-PCI bridge> on acpi0
pci2: <ACPI PCI bus> on pcib2
bge0: <Broadcom BCM5703 Gigabit Ethernet, ASIC rev. 0x1002> mem
0xf7ff0000-0xf7ffffff irq 31 at device 1.0 on pci2
bge0: Ethernet address: 00:0b:cd:29:69:35
miibus0: <MII bus> on bge0
brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bge1: <Broadcom BCM5703 Gigabit Ethernet, ASIC rev. 0x1002> mem
0xf7fe0000-0xf7feffff irq 23 at device 2.0 on pci2
bge1: Ethernet address: 00:0b:cd:29:69:36
miibus1: <MII bus> on bge1
brgphy1: <BCM5703 10/100/1000baseTX PHY> on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
pcib3: <ACPI Host-PCI bridge> on acpi0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI Host-PCI bridge> on acpi0
pci6: <ACPI PCI bus> on pcib4
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
orm0: <Option ROMs> at iomem
0xee000-0xeffff,0xcc000-0xcd7ff,0xc8000-0xcbfff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0

Timecounters tick every 10.000 msec
acd0: CDROM <COMPAQ CD-ROM SN-124> at ata0-master PIO4
GEOM: create disk da0 dp=0xd29da450
da0 at ciss0 bus 0 target 0 lun 0
da0: <COMPAQ RAID 1  VOLUME OK> Fixed Direct Access SCSI-0 device 
da0: 135.168MB/s transfers
da0: 17359MB (35553120 512 byte sectors: 255H 32S/T 4357C)
SMP: AP CPU #7 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #5 Launched!
Mounting root from ufs:/dev/da0s1a
bge0: gigabit link up
From john.cagle at hp.com  Thu Nov  6 17:54:25 2003
From: john.cagle at hp.com (Cagle, John (ISS-Houston))
Date: Thu Nov  6 17:54:57 2003
Subject: Dmesg on 4-way w/HTT (8 procs total)
Message-ID: <C50AB9511EE59B49B2A503CB7AE1ABD106610E82@cceexc19.americas.cpqcorp.net>

> > -----Original Message-----
> > From: John Baldwin
> >
> > My GENERIC build finished ok, so it should at least be workable for
> > most people.  By the way, if anyone has a machine with 8 or 
> more CPUs
> > (John Cagle, I know you are out there. :)) feel free to test the new
> > code out and post a boot -v dmesg log to the smp@ list.  Thanks.
> 
> Hi John!
> 
> Yes, I'm out here!  ;-)
> 
> Attached below is a dmesg from the ProLiant DL560 which has 4 XEON-HTT
> processors.  I'll try the 8-way next.  This PAE kernel is from a cvsup
> early this morning.
> 
> Thanks,
> John Cagle

Sorry, that wasn't too useful.  I put "-v" in /boot.config but that was
Pointless.  I've attached a *REAL* boot dmesg with -v below.

Notice that I've got a Dual-Port NIC in a PCI slot (fxp0&1), and the
ports
have IRQ's 26 & 27 now!  Woo Hoo!  Previously that didn't work.

However, it looks like there may be some timer problems in the ACPI code
since it's complaining that some ACPI timers look bad.

Thanks,
John


Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights
reserved.
FreeBSD 5.1-CURRENT #0: Thu Nov  6 17:36:05 GMT 2003
    root@bigdaddy:/usr/obj/usr/src/sys/PAE
Preloaded elf kernel "/boot/kernel/kernel" at 0xc06fd000.
ACPI APIC Table: <COMPAQ 00000083>
Calibrating clock(s) ... i8254 clock: 1193349 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1888690784 Hz
CPU: Intel(R) XEON(TM) MP CPU 1.90GHz (1888.69-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf22  Stepping = 2
 
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE
,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
  Hyperthreading: 2 logical CPUs
real memory  = 9126801408 (8703 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages)
0x0000000000887000 - 0x00000000efff9fff, 4017565696 bytes (980851 pages)
0x0000000100000000 - 0x0000000215e58fff, 4662333440 bytes (1138265
pages)
avail memory = 8611352576 (8212 MB)
APIC ID: physical 0, logical 0:0
APIC ID: physical 1, logical 0:1
APIC ID: physical 2, logical 0:2
APIC ID: physical 3, logical 0:3
APIC ID: physical 4, logical 1:0
APIC ID: physical 5, logical 1:1
APIC ID: physical 6, logical 1:2
APIC ID: physical 7, logical 1:3
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
 cpu4 (AP): APIC ID:  4
 cpu5 (AP): APIC ID:  5
 cpu6 (AP): APIC ID:  6
 cpu7 (AP): APIC ID:  7
bios32: Found BIOS32 Service Directory header at 0xc00ffee0
bios32: Entry = 0xf0000 (c00f0000)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x94
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 1
APIC: CPU 2 has ACPI ID 2
APIC: CPU 3 has ACPI ID 3
APIC: CPU 4 has ACPI ID 4
APIC: CPU 5 has ACPI ID 5
APIC: CPU 6 has ACPI ID 6
APIC: CPU 7 has ACPI ID 7
MADT: Found IO APIC ID 2, Vector 0 at 0xfec00000
ioapic0: intpin 0 -> ExtINT
ioapic0: intpin 1 -> irq 1
ioapic0: intpin 2 -> irq 2
ioapic0: intpin 3 -> irq 3
ioapic0: intpin 4 -> irq 4
ioapic0: intpin 5 -> irq 5
ioapic0: intpin 6 -> irq 6
ioapic0: intpin 7 -> irq 7
ioapic0: intpin 8 -> irq 8
ioapic0: intpin 9 -> irq 9
ioapic0: intpin 10 -> irq 10
ioapic0: intpin 11 -> irq 11
ioapic0: intpin 12 -> irq 12
ioapic0: intpin 13 -> irq 13
ioapic0: intpin 14 -> irq 14
ioapic0: intpin 15 -> irq 15
MADT: Found IO APIC ID 3, Vector 16 at 0xfec01000
ioapic1: intpin 0 -> irq 16
ioapic1: intpin 1 -> irq 17
ioapic1: intpin 2 -> irq 18
ioapic1: intpin 3 -> irq 19
ioapic1: intpin 4 -> irq 20
ioapic1: intpin 5 -> irq 21
ioapic1: intpin 6 -> irq 22
ioapic1: intpin 7 -> irq 23
ioapic1: intpin 8 -> irq 24
ioapic1: intpin 9 -> irq 25
ioapic1: intpin 10 -> irq 26
ioapic1: intpin 11 -> irq 27
ioapic1: intpin 12 -> irq 28
ioapic1: intpin 13 -> irq 29
ioapic1: intpin 14 -> irq 30
ioapic1: intpin 15 -> irq 31
MADT: Found IO APIC ID 4, Vector 32 at 0xfec02000
ioapic2: intpin 0 -> irq 32
ioapic2: intpin 1 -> irq 33
ioapic2: intpin 2 -> irq 34
ioapic2: intpin 3 -> irq 35
ioapic2: intpin 4 -> irq 36
ioapic2: intpin 5 -> irq 37
ioapic2: intpin 6 -> irq 38
ioapic2: intpin 7 -> irq 39
ioapic2: intpin 8 -> irq 40
ioapic2: intpin 9 -> irq 41
ioapic2: intpin 10 -> irq 42
ioapic2: intpin 11 -> irq 43
ioapic2: intpin 12 -> irq 44
ioapic2: intpin 13 -> irq 45
ioapic2: intpin 14 -> irq 46
ioapic2: intpin 15 -> irq 47
MADT: Found IO APIC ID 5, Vector 48 at 0xfec03000
ioapic3: intpin 0 -> irq 48
ioapic3: intpin 1 -> irq 49
ioapic3: intpin 2 -> irq 50
ioapic3: intpin 3 -> irq 51
ioapic3: intpin 4 -> irq 52
ioapic3: intpin 5 -> irq 53
ioapic3: intpin 6 -> irq 54
ioapic3: intpin 7 -> irq 55
ioapic3: intpin 8 -> irq 56
ioapic3: intpin 9 -> irq 57
ioapic3: intpin 10 -> irq 58
ioapic3: intpin 11 -> irq 59
ioapic3: intpin 12 -> irq 60
ioapic3: intpin 13 -> irq 61
ioapic3: intpin 14 -> irq 62
ioapic3: intpin 15 -> irq 63
MADT: intr override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: active-hi
lapic: Routing NMI -> LINT1
ioapic0 <Version 1.1> irqs 0-15 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
ioapic2 <Version 1.1> irqs 32-47 on motherboard
ioapic3 <Version 1.1> irqs 48-63 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x00050014 LDR: 0x01000000 DFR: 0x0fffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
acpi0: <COMPAQ P30     > on motherboard
    ACPI-1016: *** Info: There are no GPE blocks defined in the FADT
acpi0: Power Button (fixed)
ACPI timer looks BAD  min = 4, max = 7, width = 3
ACPI timer looks BAD  min = 4, max = 7, width = 3
ACPI timer looks BAD  min = 4, max = 7, width = 3
ACPI timer looks BAD  min = 4, max = 7, width = 3
ACPI timer looks BAD  min = 4, max = 8, width = 4
ACPI timer looks BAD  min = 4, max = 8, width = 4
ACPI timer looks BAD  min = 4, max = 7, width = 3
ACPI timer looks BAD  min = 4, max = 7, width = 3
ACPI timer looks BAD  min = 4, max = 7, width = 3
ACPI timer looks BAD  min = 4, max = 7, width = 3
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
pci_open(1):	mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=80] is there (id=00121166)
pcibios: BIOS version 2.10
AcpiOsDerivePciId: bus 0 dev 0 func 0
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x920-0x923 on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_cpu2: <CPU> on acpi0
acpi_cpu3: <CPU> on acpi0
acpi_cpu4: <CPU> on acpi0
acpi_cpu5: <CPU> on acpi0
acpi_cpu6: <CPU> on acpi0
acpi_cpu7: <CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
---- initial configuration ------------------------
\\_SB_.IUSB irq   7: [  4  5  7 10 11 15]  0.15.0
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.IUSB irq   7: [  4  5  7 10 11 15]  0.15.0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found->	vendor=0x1166, dev=0x0012, revid=0x13
	bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1166, dev=0x0012, revid=0x00
	bus=0, slot=0, func=1
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1166, dev=0x0000, revid=0x00
	bus=0, slot=0, func=2
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type 1, range 32, base f6000000, size 24, enabled
	map[14]: type 4, range 32, base 00002400, size  8, enabled
	map[18]: type 1, range 32, base f5ff0000, size 12, enabled
found->	vendor=0x1002, dev=0x4752, revid=0x27
	bus=0, slot=3, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0087, statreg=0x0290, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0
ns)
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 4, range 32, base 00001800, size  8, enabled
	map[14]: type 1, range 32, base f5fe0000, size  9, enabled
pcib0: matched entry for 0.4.INTA (source )
pcib0: device is hardwired to IRQ 16
found->	vendor=0x0e11, dev=0xb203, revid=0x01
	bus=0, slot=4, func=0
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0103, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=16
	powerspec 2  supports D0 D3  current D0
	map[10]: type 4, range 32, base 00002800, size  8, enabled
	map[14]: type 1, range 32, base f5fd0000, size 11, enabled
	map[18]: type 1, range 32, base f5fc0000, size 13, enabled
	map[1c]: type 1, range 32, base f5f00000, size 19, enabled
pcib0: matched entry for 0.4.INTB (source )
pcib0: device is hardwired to IRQ 17
found->	vendor=0x0e11, dev=0xb204, revid=0x01
	bus=0, slot=4, func=2
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0197, statreg=0x0290, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=17
	powerspec 2  supports D0 D3  current D0
found->	vendor=0x1166, dev=0x0201, revid=0x93
	bus=0, slot=15, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0147, statreg=0x2200, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type 4, range 32, base 000001f0, size  3, enabled
	map[14]: type 4, range 32, base 000003f4, size  2, enabled
	map[18]: type 4, range 32, base 00000170, size  3, enabled
	map[1c]: type 4, range 32, base 00000374, size  2, enabled
	map[20]: type 4, range 32, base 00002000, size  4, enabled
found->	vendor=0x1166, dev=0x0212, revid=0x93
	bus=0, slot=15, func=1
	class=01-01-8a, hdrtype=0x00, mfdev=1
	cmdreg=0x0145, statreg=0x0200, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type 1, range 32, base f5ef0000, size 12, enabled
pcib0: matched entry for 0.15.INTA (source \\_SB_.IUSB)
pcib0: _CRS resource entry has unsupported type 14
found->	vendor=0x1166, dev=0x0220, revid=0x05
	bus=0, slot=15, func=2
	class=0c-03-10, hdrtype=0x00, mfdev=1
	cmdreg=0x0157, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000
ns)
	intpin=a, irq=7
found->	vendor=0x1166, dev=0x0225, revid=0x00
	bus=0, slot=15, func=3
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0004, statreg=0x0200, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1166, dev=0x0101, revid=0x05
	bus=0, slot=16, func=0
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0142, statreg=0x0230, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1166, dev=0x0101, revid=0x05
	bus=0, slot=16, func=2
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0142, statreg=0x02b0, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1166, dev=0x0101, revid=0x05
	bus=0, slot=17, func=0
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0142, statreg=0x0230, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1166, dev=0x0101, revid=0x05
	bus=0, slot=17, func=2
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0142, statreg=0x0230, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pci0: <display, VGA> at device 3.0 (no driver attached)
pci0: <base peripheral> at device 4.0 (no driver attached)
pci0: <base peripheral> at device 4.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks CSB5 UDMA100 controller> port
0x2000-0x200f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device
15.1 on pci0
ata0: reset tp1 mask=03 ostat0=50 ostat1=01
ata0-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0-slave:  stat=0x00 err=0x24 lsb=0xff msb=0x00
ata0: reset tp2 mask=03 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: simplex device, DMA on primary only
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <serial bus, USB> at device 15.2 (no driver attached)
pcib1: <ACPI Host-PCI bridge> on acpi0
---- initial configuration ------------------------
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
	map[10]: type 1, range 64, base f7bc0000, size 18, enabled
	map[18]: type 4, range 32, base 00003000, size  8, enabled
	map[1c]: type 3, range 64, base f7af0000, size 14, enabled
pcib1: matched entry for 1.3.INTA (source )
pcib1: device is hardwired to IRQ 30
found->	vendor=0x0e11, dev=0xb178, revid=0x01
	bus=1, slot=3, func=0
	class=01-04-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0157, statreg=0x02b0, cachelnsz=16 (dwords)
	lattimer=0x47 (2130 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=30
	powerspec 2  supports D0 D1 D3  current D0
	MSI supports 2 messages, 64 bit
ciss0: <Compaq Smart Array 5i> port 0x3000-0x30ff mem
0xf7af0000-0xf7af3fff,0xf7bc0000-0xf7bfffff irq 30 at device 3.0 on pci1
ciss0: using 256 of 1024 available commands
ciss0:   1 logical drive configured
ciss0:   firmware 1.92
ciss0:   2 SCSI channels
ciss0:   signature 'CISS'
ciss0:   valence 1
ciss0:   supported I/O methods 0xe<simple,performant,MEMQ>
ciss0:   active I/O method 0x3<simple>
ciss0:   4G page base 0x00000000
ciss0:   interrupt coalesce delay 1000us
ciss0:   interrupt coalesce count 16
ciss0:   max outstanding commands 1024
ciss0:   bus types 0x2<ultra3>
ciss0:   server name ''
ciss0:   heartbeat 0x1000004b
ciss0: 1 logical drive
ciss0: logical drive 0: RAID 1, 16896MB online
pcib2: <ACPI Host-PCI bridge> on acpi0
---- initial configuration ------------------------
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
	map[10]: type 1, range 64, base f7cf0000, size 16, enabled
pcib2: matched entry for 2.1.INTA (source )
pcib2: device is hardwired to IRQ 31
found->	vendor=0x14e4, dev=0x16a7, revid=0x02
	bus=2, slot=1, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0156, statreg=0x02b0, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0
ns)
	intpin=a, irq=31
	powerspec 2  supports D0 D3  current D0
	MSI supports 8 messages, 64 bit
	map[10]: type 1, range 64, base f7ce0000, size 16, enabled
pcib2: matched entry for 2.2.INTA (source )
pcib2: device is hardwired to IRQ 23
found->	vendor=0x14e4, dev=0x16a7, revid=0x02
	bus=2, slot=2, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0156, statreg=0x02b0, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0
ns)
	intpin=a, irq=23
	powerspec 2  supports D0 D3  current D0
	MSI supports 8 messages, 64 bit
bge0: <Broadcom BCM5703 Gigabit Ethernet, ASIC rev. 0x1002> mem
0xf7cf0000-0xf7cfffff irq 31 at device 1.0 on pci2
bge0: Ethernet address: 00:0b:cd:29:69:35
miibus0: <MII bus> on bge0
brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bge0: bpf attached
bge1: <Broadcom BCM5703 Gigabit Ethernet, ASIC rev. 0x1002> mem
0xf7ce0000-0xf7ceffff irq 23 at device 2.0 on pci2
bge1: Ethernet address: 00:0b:cd:29:69:36
miibus1: <MII bus> on bge1
brgphy1: <BCM5703 10/100/1000baseTX PHY> on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bge1: bpf attached
pcib3: <ACPI Host-PCI bridge> on acpi0
---- initial configuration ------------------------
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
pci3: <ACPI PCI bus> on pcib3
pci3: physical bus=3
pcib4: <ACPI Host-PCI bridge> on acpi0
---- initial configuration ------------------------
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
pci6: <ACPI PCI bus> on pcib4
pci6: physical bus=6
found->	vendor=0x1011, dev=0x0026, revid=0x02
	bus=6, slot=2, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0147, statreg=0x0290, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0
ns)
pcib5: <PCI-PCI bridge> at device 2.0 on pci6
pcib5:   secondary bus     7
pcib5:   subordinate bus   7
pcib5:   I/O decode        0x4000-0x4fff
pcib5:   memory decode     0xf7e00000-0xf7ffffff
pcib5:   prefetched decode 0xf7d00000-0xf7dfffff
pci7: <PCI bus> on pcib5
pci7: physical bus=7
	map[10]: type 3, range 32, base f7df0000, size 12, enabled
	map[14]: type 4, range 32, base 00004000, size  5, enabled
	map[18]: type 1, range 32, base f7f00000, size 20, enabled
pcib4: matched entry for 6.2.INTA (source )
pcib4: device is hardwired to IRQ 26
pcib5: slot 4 INTA is routed to irq 26
found->	vendor=0x8086, dev=0x1229, revid=0x05
	bus=7, slot=4, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0157, statreg=0x0280, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38
(14000 ns)
	intpin=a, irq=26
	map[10]: type 3, range 32, base f7de0000, size 12, enabled
	map[14]: type 4, range 32, base 00004020, size  5, enabled
	map[18]: type 1, range 32, base f7e00000, size 20, enabled
pcib4: matched entry for 6.2.INTB (source )
pcib4: device is hardwired to IRQ 27
pcib5: slot 5 INTA is routed to irq 27
found->	vendor=0x8086, dev=0x1229, revid=0x05
	bus=7, slot=5, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0157, statreg=0x0280, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38
(14000 ns)
	intpin=a, irq=27
fxp0: <Intel 82558 Pro/100 Ethernet> port 0x4000-0x401f mem
0xf7f00000-0xf7ffffff,0xf7df0000-0xf7df0fff irq 26 at device 4.0 on pci7
pcib5: device fxp0 requested decoded memory range 0xf7df0000-0xf7df0fff
fxp0: using memory space register mapping
fxp0: Ethernet address 00:08:c7:91:14:c2
fxp0: PCI IDs: 8086 1229 0e11 b0dd 0005
fxp0: Dynamic Standby mode is disabled
miibus2: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus2
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
fxp1: <Intel 82558 Pro/100 Ethernet> port 0x4020-0x403f mem
0xf7e00000-0xf7efffff,0xf7de0000-0xf7de0fff irq 27 at device 5.0 on pci7
pcib5: device fxp1 requested decoded memory range 0xf7de0000-0xf7de0fff
fxp1: using memory space register mapping
fxp1: Ethernet address 00:08:c7:91:14:c3
fxp1: PCI IDs: 8086 1229 0e11 b0dd 0005
fxp1: Dynamic Standby mode is disabled
miibus3: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> on miibus3
inphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: bpf attached
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: unable to allocate IRQ
psmcpnp0 irq 12 on acpi0
psm0: current command byte:0065
psm0: failed to reset the aux device.
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
isa_dmainit(2, 1024) failed
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
sio: sio0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem
0xee000-0xeffff,0xcc000-0xcd7ff,0xc8000-0xcbfff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x1 0x1 0x1 0x1
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 06 e0 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1888690784 Hz quality -100
Timecounters tick every 10.000 msec
lo0: bpf attached
ata0-master: pio=0x0c wdma=0xffffffff udma=0xffffffff cable=40pin
acd0: setting PIO4 on ServerWorks CSB5 chip
acd0: <COMPAQ CD-ROM SN-124/N104> CDROM drive at ata0 as master
acd0: read 4134KB/s (4134KB/s), 128KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ciss0: command status 0x1 (target status) scsi status 0x2
(probe0:ciss0:0:0:0): error 22
(probe0:ciss0:0:0:0): Unretryable Error
ciss0: command status 0x1 (target status) scsi status 0x2
(probe0:ciss0:0:0:0): error 22
(probe0:ciss0:0:0:0): Unretryable Error
pass0 at ciss0 bus 0 target 0 lun 0
pass0: <COMPAQ RAID 1  VOLUME OK> Fixed Direct Access SCSI-0 device 
pass0: 135.168MB/s transfers
GEOM: create disk da0 dp=0xd2d8e450
GEOM: new disk da0
da0 at ciss0 bus 0 target 0 lun 0
da0: <COMPAQ RAID 1  VOLUME OK> Fixed Direct Access SCSI-0 device 
da0: 135.168MB/s transfers
da0: 17359MB (35553120 512 byte sectors: 255H 32S/T 4357C)
SMP: AP CPU #7 Launched!
cpu7 AP:
     ID: 0x07000000   VER: 0x00050014 LDR: 0x18000000 DFR: 0x0fffffff
  lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
SMP: AP CPU #1 Launched!
cpu1 AP:
     ID: 0x01000000   VER: 0x00050014 LDR: 0x02000000 DFR: 0x0fffffff
  lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
SMP: AP CPU #3 Launched!
cpu3 AP:
     ID: 0x03000000   VER: 0x00050014 LDR: 0x08000000 DFR: 0x0fffffff
  lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
SMP: AP CPU #4 Launched!
cpu4 AP:
     ID: 0x04000000   VER: 0x00050014 LDR: 0x11000000 DFR: 0x0fffffff
  lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
SMP: AP CPU #6 Launched!
cpu6 AP:
     ID: 0x06000000   VER: 0x00050014 LDR: 0x14000000 DFR: 0x0fffffff
  lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
SMP: AP CPU #2 Launched!
cpu2 AP:
     ID: 0x02000000   VER: 0x00050014 LDR: 0x04000000 DFR: 0x0fffffff
  lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
SMP: AP CPU #5 Launched!
cpu5 AP:
     ID: 0x05000000   VER: 0x00050014 LDR: 0x12000000 DFR: 0x0fffffff
  lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
ioapic0: routing intpin 1 (IRQ 1) to cluster 0
ioapic0: routing intpin 4 (IRQ 4) to cluster 1
ioapic0: routing intpin 6 (IRQ 6) to cluster 0
ioapic0: routing intpin 8 (IRQ 8) to cluster 0
ioapic0: routing intpin 9 (IRQ 9) to cluster 0
ioapic0: routing intpin 13 (IRQ 13) to cluster 1
ioapic0: routing intpin 14 (IRQ 14) to cluster 1
ioapic0: routing intpin 15 (IRQ 15) to cluster 0
ioapic1: routing intpin 7 (IRQ 23) to cluster 1
ioapic1: routing intpin 10 (IRQ 26) to cluster 0
ioapic1: routing intpin 11 (IRQ 27) to cluster 1
ioapic1: routing intpin 14 (IRQ 30) to cluster 1
ioapic1: routing intpin 15 (IRQ 31) to cluster 0
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/32 s:32 l:35553088
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure da0s1, start 16384 length 18203181056 end 18203197439
ciss0: command status 0x1 (target status) scsi status 0x2
ciss0: command status 0x1 (target status) scsi status 0x2
ciss0: command status 0x1 (target status) scsi status 0x2
ciss0: command status 0x1 (target status) scsi status 0x2
GEOM: Configure da0s1a, start 0 length 268435456 end 268435455
GEOM: Configure da0s1b, start 268435456 length 8589934592 end 8858370047
GEOM: Configure da0s1c, start 0 length 18203181056 end 18203181055
GEOM: Configure da0s1d, start 8858370048 length 268435456 end 9126805503
GEOM: Configure da0s1e, start 9126805504 length 268435456 end 9395240959
GEOM: Configure da0s1f, start 9395240960 length 8807940096 end
18203181055
ciss0: command status 0x1 (target status) scsi status 0x2
ciss0: command status 0x1 (target status) scsi status 0x2
ciss0: command status 0x1 (target status) scsi status 0x2
ciss0: command status 0x1 (target status) scsi status 0x2
ciss0: command status 0x1 (target status) scsi status 0x2
ciss0: command status 0x1 (target status) scsi status 0x2
ciss0: command status 0x1 (target status) scsi status 0x2
ciss0: command status 0x1 (target status) scsi status 0x2
ciss0: command status 0x1 (target status) scsi status 0x2
ciss0: command status 0x1 (target status) scsi status 0x2
ciss0: command status 0x1 (target status) scsi status 0x2
ciss0: command status 0x1 (target status) scsi status 0x2
ciss0: command status 0x1 (target status) scsi status 0x2
Mounting root from ufs:/dev/da0s1a
start_init: trying /sbin/init
bge0: gigabit link up
From john.cagle at hp.com  Thu Nov  6 21:25:35 2003
From: john.cagle at hp.com (Cagle, John (ISS-Houston))
Date: Thu Nov  6 21:26:07 2003
Subject: -current 8-way problem: "I/O APIC ID 16 too high"
Message-ID: <C50AB9511EE59B49B2A503CB7AE1ABD106610E86@cceexc19.americas.cpqcorp.net>

I gave the latest kernel a spin on a ProLiant DL740 with 8 physical
processors installed.
It paniced during boot with this message:

MADT: Found IO APIC ID 16, Vector 0 at 0xfec00000
Panic: madt_parse_apics: I/O APIC ID 16 too high

This server has IO-APICS that are numbered 16, 17, & 18.  I bumped up
NIOAPICS and NLAPICS to 32, rebuilt the kernel and now it works!  I've
attached a kernel boot log below.  Is it OK to run with NIOAPICS > 16?

Thanks,
John


syslogd: kernel boot file is /boot/kernel/kernel
kernel: 6
kernel: ioapic1: intpin 1 -> irq 17
kernel: ioapic1: intpin 2 -> irq 18
kernel: ioapic1: intpin 3 -> irq 19
kernel: ioapic1: intpin 4 -> irq 20
kernel: ioapic1: intpin 5 -> irq 21
kernel: ioapic1: intpin 6 -> irq 22
kernel: ioapic1: intpin 7 -> irq 23
kernel: ioapic1: intpin 8 -> irq 24
kernel: ioapic1: intpin 9 -> irq 25
kernel: ioapic1: intpin 10 -> irq 26
kernel: ioapic1: intpin 11 -> irq 27
kernel: ioapic1: intpin 12 -> irq 28
kernel: ioapic1: intpin 13 -> irq 29
kernel: ioapic1: intpin 14 -> irq 30
kernel: ioapic1: intpin 15 -> irq 31
kernel: MADT: Found IO APIC ID 18, Vector 32 at 0xfec02000
kernel: ioapic2: Changing APIC ID to 18
kernel: ioapic2: intpin 0 -> irq 32
kernel: ioapic2: intpin 1 -> irq 33
kernel: ioapic2: intpin 2 -> irq 34
kernel: ioapic2: intpin 3 -> irq 35
kernel: ioapic2: intpin 4 -> irq 36
kernel: ioapic2: intpin 5 -> irq 37
kernel: ioapic2: intpin 6 -> irq 38
kernel: ioapic2: intpin 7 -> irq 39
kernel: ioapic2: intpin 8 -> irq 40
kernel: ioapic2: intpin 9 -> irq 41
kernel: ioapic2: intpin 10 -> irq 42
kernel: ioapic2: intpin 11 -> irq 43
kernel: ioapic2: intpin 12 -> irq 44
kernel: ioapic2: intpin 13 -> irq 45
kernel: ioapic2: intpin 14 -> irq 46
kernel: ioapic2: intpin 15 -> irq 47
kernel: MADT: intr override: source 0, irq 2
kernel: ioapic0: Routing IRQ 0 -> intpin 2
kernel: ioapic0: intpin 2 trigger: edge
kernel: ioapic0: intpin 2 polarity: active-hi
kernel: lapic: Routing NMI -> LINT1
kernel: ioapic0 <Version 1.1> irqs 0-15 on motherboard
kernel: ioapic1 <Version 1.1> irqs 16-31 on motherboard
kernel: ioapic2 <Version 1.1> irqs 32-47 on motherboard
kernel: cpu0 BSP:
kernel: ID: 0x00000000   VER: 0x00050014 LDR: 0x01000000 DFR: 0x0fffffff
kernel: lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR:
0x000001ff
kernel: null: <null device, zero device>
kernel: random: <entropy source>
kernel: mem: <memory & I/O>
kernel: Pentium Pro MTRR support enabled
kernel: acpi0: <HP     P47     > on motherboard
kernel: pci_open(1):	mode 1 addr port (0x0cf8) is 0x00000000
kernel: pci_open(1a):	mode1res=0x80000000 (0x80000000)
kernel: pci_cfgcheck:	device 0 1 2 3 [class=030000] [hdr=00] is there
(id=47521002)
kernel: pcibios: BIOS version 2.10
kernel: Using $PIR table, 18 entries at 0xc00f9010
kernel: PCI-Only Interrupts: none
kernel: Location  Bus Device Pin  Link  IRQs
kernel: slot 1      7    1    A   0x01  3 4 5 7 10 11 12
kernel: slot 1      7    1    B   0x02  3 4 5 7 10 11 12
kernel: slot 1      7    1    C   0x01  3 4 5 7 10 11 12
kernel: slot 1      7    1    D   0x02  3 4 5 7 10 11 12
kernel: slot 2      7    2    A   0x03  3 4 5 7 10 11 12
kernel: slot 2      7    2    B   0x04  3 4 5 7 10 11 12
kernel: slot 2      7    2    C   0x03  3 4 5 7 10 11 12
kernel: slot 2      7    2    D   0x04  3 4 5 7 10 11 12
kernel: slot 3     11    1    A   0x05  3 4 5 7 10 11 12
kernel: slot 3     11    1    B   0x06  3 4 5 7 10 11 12
kernel: slot 3     11    1    C   0x05  3 4 5 7 10 11 12
kernel: slot 3     11    1    D   0x06  3 4 5 7 10 11 12
kernel: slot 4     11    2    A   0x07  3 4 5 7 10 11 12
kernel: slot 4     11    2    B   0x08  3 4 5 7 10 11 12
kernel: slot 4     11    2    C   0x07  3 4 5 7 10 11 12
kernel: slot 4     11    2    D   0x08  3 4 5 7 10 11 12
kernel: slot 5      3    1    A   0x09  3 4 5 7 10 11 12
kernel: slot 5      3    1    B   0x0a  3 4 5 7 10 11 12
kernel: slot 5      3    1    C   0x09  3 4 5 7 10 11 12
kernel: slot 5      3    1    D   0x0a  3 4 5 7 10 11 12
kernel: slot 6      3    2    A   0x0b  3 4 5 7 10 11 12
kernel: slot 6      3    2    B   0x0c  3 4 5 7 10 11 12
kernel: slot 6      3    2    C   0x0b  3 4 5 7 10 11 12
kernel: slot 6      3    2    D   0x0c  3 4 5 7 10 11 12
kernel: embedded    0   30    A   0x0d  3 4 5 7 10 11 12
kernel: embedded    1   30    A   0x0d  3 4 5 7 10 11 12
kernel: embedded    2   30    A   0x0d  3 4 5 7 10 11 12
kernel: embedded    3   30    A   0x0d  3 4 5 7 10 11 12
kernel: embedded    7   30    A   0x0d  3 4 5 7 10 11 12
kernel: embedded   11   30    A   0x0d  3 4 5 7 10 11 12
kernel: embedded    2   14    A   0x0e  3 4 5 7 10 11 12
kernel: embedded    0   16    A   0x0f  3 4 5 7 10 11 12
kernel: embedded    0   16    B   0x10  3 4 5 7 10 11 12
kernel: embedded    0   16    C   0x11  3 4 5 7 10 11 12
kernel: embedded    0   16    D   0x12  none
kernel: embedded    1    4    A   0x14  3 4 5 7 10 11 12
kernel: embedded    1    5    A   0x15  3 4 5 7 10 11 12
kernel: embedded    0   15    A   0x16  3 4 5 7 10 11 12
kernel: embedded    0   12    A   0x17  3 4 5 7 10 11 12
kernel: embedded    0   12    B   0x18  3 4 5 7 10 11 12
kernel: AcpiOsDerivePciId: bus 0 dev 16 func 0
kernel: acpi0: Power Button (fixed)
kernel: ACPI timer looks BAD  min = 5, max = 11, width = 6
kernel: ACPI timer looks BAD  min = 5, max = 8, width = 3
kernel: ACPI timer looks BAD  min = 5, max = 11, width = 6
kernel: ACPI timer looks BAD  min = 5, max = 8, width = 3
last message repeated 4 times
kernel: ACPI timer looks BAD  min = 5, max = 10, width = 5
kernel: ACPI timer looks BAD  min = 5, max = 9, width = 4
kernel: Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
kernel: AcpiOsDerivePciId: bus 0 dev 24 func 0
kernel: AcpiOsDerivePciId: bus 0 dev 24 func 2
kernel: AcpiOsDerivePciId: bus 0 dev 24 func 4
kernel: AcpiOsDerivePciId: bus 0 dev 24 func 6
kernel: AcpiOsDerivePciId: bus 0 dev 25 func 0
kernel: AcpiOsDerivePciId: bus 0 dev 25 func 2
kernel: acpi_timer0: <32-bit timer at 3.579545MHz> port 0x920-0x923 on
acpi0
kernel: acpi_cpu0: <CPU> on acpi0
kernel: acpi_cpu1: <CPU> on acpi0
kernel: acpi_cpu2: <CPU> on acpi0
kernel: acpi_cpu3: <CPU> on acpi0
kernel: acpi_cpu4: <CPU> on acpi0
kernel: acpi_cpu5: <CPU> on acpi0
kernel: acpi_cpu6: <CPU> on acpi0
kernel: acpi_cpu7: <CPU> on acpi0
kernel: acpi_cpu8: <CPU> on acpi0
kernel: acpi_cpu9: <CPU> on acpi0
kernel: acpi_cpu10: <CPU> on acpi0
kernel: acpi_cpu11: <CPU> on acpi0
kernel: acpi_cpu12: <CPU> on acpi0
kernel: acpi_cpu13: <CPU> on acpi0
kernel: acpi_cpu14: <CPU> on acpi0
kernel: acpi_cpu15: <CPU> on acpi0
kernel: acpi_tz0: <Thermal Zone> on acpi0
kernel: pcib0: <ACPI Host-PCI bridge> on acpi0
kernel: ---- initial configuration ------------------------
kernel: \_SB_.IUSB irq  10: [  5  7 10 11 12]  0.15.0
kernel: ---- before setting priority for links ------------
kernel: ---- before fixup boot-disabled links -------------
kernel: ---- after fixup boot-disabled links --------------
kernel: ---- arbitrated configuration ---------------------
kernel: \_SB_.IUSB irq  10: [  5  7 10 11 12]  0.15.0
kernel: pci0: <ACPI PCI bus> on pcib0
kernel: pci0: physical bus=0
kernel: map[10]: type 1, range 32, base f7000000, size 24, enabled
kernel: map[14]: type 4, range 32, base 00002000, size  8, enabled
kernel: map[18]: type 1, range 32, base f6ff0000, size 12, enabled
kernel: pcib0: matched entry for 0.3.INTA (source )
kernel: pcib0: device is hardwired to IRQ 45
kernel: found->	vendor=0x1002, dev=0x4752, revid=0x27
kernel: bus=0, slot=3, func=0
kernel: class=03-00-00, hdrtype=0x00, mfdev=0
kernel: cmdreg=0x0087, statreg=0x0290, cachelnsz=16 (dwords)
kernel: lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0
ns)
kernel: intpin=a, irq=45
kernel: powerspec 2  supports D0 D1 D2 D3  current D0
kernel: map[10]: type 4, range 32, base 00001800, size  8, enabled
kernel: map[14]: type 1, range 32, base f6fe0000, size  9, enabled
kernel: pcib0: matched entry for 0.12.INTA (source )
kernel: pcib0: device is hardwired to IRQ 47
kernel: found->	vendor=0x0e11, dev=0xb203, revid=0x01
kernel: bus=0, slot=12, func=0
kernel: class=08-80-00, hdrtype=0x00, mfdev=1
kernel: cmdreg=0x0143, statreg=0x0290, cachelnsz=0 (dwords)
kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
kernel: intpin=a, irq=47
kernel: powerspec 2  supports D0 D3  current D0
kernel: map[10]: type 4, range 32, base 00002400, size  8, enabled
kernel: map[14]: type 1, range 32, base f6fd0000, size 11, enabled
kernel: map[18]: type 1, range 32, base f6fc0000, size 13, enabled
kernel: map[1c]: type 1, range 32, base f6f00000, size 19, enabled
kernel: pcib0: matched entry for 0.12.INTB (source )
kernel: pcib0: device is hardwired to IRQ 46
kernel: found->	vendor=0x0e11, dev=0xb204, revid=0x01
kernel: bus=0, slot=12, func=2
kernel: class=08-80-00, hdrtype=0x00, mfdev=1
kernel: cmdreg=0x01d7, statreg=0x0290, cachelnsz=16 (dwords)
kernel: lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
kernel: intpin=b, irq=46
kernel: powerspec 2  supports D0 D3  current D0
kernel: found->	vendor=0x1166, dev=0x0201, revid=0x93
kernel: bus=0, slot=15, func=0
kernel: class=06-00-00, hdrtype=0x00, mfdev=1
kernel: cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
kernel: lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
kernel: map[10]: type 4, range 32, base 00002800, size  3, enabled
kernel: map[14]: type 4, range 32, base 00002808, size  2, enabled
kernel: map[18]: type 4, range 32, base 00002810, size  3, enabled
kernel: map[1c]: type 4, range 32, base 00002818, size  2, enabled
kernel: map[20]: type 4, range 32, base 00002820, size  4, enabled
kernel: found->	vendor=0x1166, dev=0x0212, revid=0x93
kernel: bus=0, slot=15, func=1
kernel: class=01-01-8a, hdrtype=0x00, mfdev=1
kernel: cmdreg=0x0155, statreg=0x0200, cachelnsz=16 (dwords)
kernel: lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
kernel: map[10]: type 1, range 32, base f6ef0000, size 12, enabled
kernel: pcib0: matched entry for 0.15.INTA (source \_SB_.IUSB)
kernel: pcib0: _CRS resource entry has unsupported type 14
kernel: found->	vendor=0x1166, dev=0x0220, revid=0x05
kernel: bus=0, slot=15, func=2
kernel: class=0c-03-10, hdrtype=0x00, mfdev=1
kernel: cmdreg=0x0157, statreg=0x0280, cachelnsz=0 (dwords)
kernel: lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000
ns)
kernel: intpin=a, irq=10
kernel: found->	vendor=0x1166, dev=0x0225, revid=0x00
kernel: bus=0, slot=15, func=3
kernel: class=06-01-00, hdrtype=0x00, mfdev=1
kernel: cmdreg=0x0004, statreg=0x0200, cachelnsz=0 (dwords)
kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
kernel: map[10]: type 1, range 32, base f6ee0000, size 11, enabled
kernel: pcib0: matched entry for 0.16.INTA (source )
kernel: pcib0: device is hardwired to IRQ 39
kernel: found->	vendor=0x0e11, dev=0xb200, revid=0x03
kernel: bus=0, slot=16, func=0
kernel: class=05-80-00, hdrtype=0x00, mfdev=1
kernel: cmdreg=0x0007, statreg=0x00a0, cachelnsz=16 (dwords)
kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
kernel: intpin=a, irq=39
kernel: map[10]: type 1, range 32, base f6ed0000, size 11, enabled
kernel: pcib0: matched entry for 0.16.INTB (source )
kernel: pcib0: device is hardwired to IRQ 38
kernel: found->	vendor=0x0e11, dev=0xb200, revid=0x03
kernel: bus=0, slot=16, func=1
kernel: class=05-80-00, hdrtype=0x00, mfdev=1
kernel: cmdreg=0x0007, statreg=0x00a0, cachelnsz=16 (dwords)
kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
kernel: intpin=b, irq=38
kernel: map[10]: type 1, range 32, base f6ec0000, size 11, enabled
kernel: pcib0: matched entry for 0.16.INTC (source )
kernel: pcib0: device is hardwired to IRQ 37
kernel: found->	vendor=0x0e11, dev=0xb200, revid=0x03
kernel: bus=0, slot=16, func=2
kernel: class=05-80-00, hdrtype=0x00, mfdev=1
kernel: cmdreg=0x0007, statreg=0x00a0, cachelnsz=16 (dwords)
kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
kernel: intpin=c, irq=37
kernel: found->	vendor=0x0e11, dev=0xb1c2, revid=0x00
kernel: bus=0, slot=23, func=0
kernel: class=06-00-00, hdrtype=0x00, mfdev=0
kernel: cmdreg=0x0007, statreg=0x0000, cachelnsz=16 (dwords)
kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
kernel: found->	vendor=0x1166, dev=0x0010, revid=0x04
kernel: bus=0, slot=24, func=0
kernel: class=06-00-00, hdrtype=0x00, mfdev=1
kernel: cmdreg=0x0142, statreg=0x22b0, cachelnsz=0 (dwords)
kernel: lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
kernel: found->	vendor=0x1166, dev=0x0010, revid=0x04
kernel: bus=0, slot=24, func=2
kernel: class=06-00-00, hdrtype=0x00, mfdev=1
kernel: cmdreg=0x0142, statreg=0x2230, cachelnsz=0 (dwords)
kernel: lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
kernel: found->	vendor=0x1166, dev=0x0010, revid=0x04
kernel: bus=0, slot=24, func=4
kernel: class=06-00-00, hdrtype=0x00, mfdev=1
kernel: cmdreg=0x0142, statreg=0x2230, cachelnsz=0 (dwords)
kernel: lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
kernel: found->	vendor=0x1166, dev=0x0010, revid=0x04
kernel: bus=0, slot=24, func=6
kernel: class=06-00-00, hdrtype=0x00, mfdev=1
kernel: cmdreg=0x0142, statreg=0x22b0, cachelnsz=0 (dwords)
kernel: lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
kernel: found->	vendor=0x1166, dev=0x0010, revid=0x04
kernel: bus=0, slot=25, func=0
kernel: class=06-00-00, hdrtype=0x00, mfdev=1
kernel: cmdreg=0x0142, statreg=0x22b0, cachelnsz=0 (dwords)
kernel: lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
kernel: found->	vendor=0x1166, dev=0x0010, revid=0x04
kernel: bus=0, slot=25, func=2
kernel: class=06-00-00, hdrtype=0x00, mfdev=1
kernel: cmdreg=0x0142, statreg=0x22b0, cachelnsz=0 (dwords)
kernel: lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
kernel: pci0: <display, VGA> at device 3.0 (no driver attached)
kernel: pci0: <base peripheral> at device 12.0 (no driver attached)
kernel: pci0: <base peripheral> at device 12.2 (no driver attached)
kernel: atapci0: <ServerWorks CSB5 UDMA100 controller> port
0x2820-0x282f,0x2818-0x281b,0x2810-0x2817,0x2808-0x280b,0x2800-0x2807 at
device 15.1 on pci0
kernel: ata0: reset tp1 mask=03 ostat0=50 ostat1=01
kernel: ata0-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
kernel: ata0-slave:  stat=0x01 err=0x04 lsb=0x14 msb=0xeb
kernel: ata0: reset tp2 mask=03 stat0=00 stat1=01
devices=0x4<ATAPI_MASTER>
kernel: ata0: at 0x1f0 irq 14 on atapci0
kernel: ata0: [MPSAFE]
kernel: ata1: simplex device, DMA on primary only
kernel: ata1: at 0x170 irq 15 on atapci0
kernel: ata1: [MPSAFE]
kernel: pci0: <serial bus, USB> at device 15.2 (no driver attached)
kernel: isab0: <PCI-ISA bridge> at device 15.3 on pci0
kernel: isa0: <ISA bus> on isab0
kernel: pci0: <memory> at device 16.0 (no driver attached)
kernel: pci0: <memory> at device 16.1 (no driver attached)
kernel: pci0: <memory> at device 16.2 (no driver attached)
kernel: pcib1: <ACPI Host-PCI bridge> on acpi0
kernel: ---- initial configuration ------------------------
kernel: ---- before setting priority for links ------------
kernel: ---- before fixup boot-disabled links -------------
kernel: ---- after fixup boot-disabled links --------------
kernel: ---- arbitrated configuration ---------------------
kernel: pci1: <ACPI PCI bus> on pcib1
kernel: pci1: physical bus=1
kernel: map[10]: type 1, range 64, base f6df0000, size 16, enabled
kernel: pcib1: matched entry for 1.4.INTA (source )
kernel: pcib1: device is hardwired to IRQ 44
kernel: found->	vendor=0x14e4, dev=0x16a7, revid=0x02
kernel: bus=1, slot=4, func=0
kernel: class=02-00-00, hdrtype=0x00, mfdev=0
kernel: cmdreg=0x0156, statreg=0x02b0, cachelnsz=16 (dwords)
kernel: lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0
ns)
kernel: intpin=a, irq=44
kernel: powerspec 2  supports D0 D3  current D0
kernel: MSI supports 8 messages, 64 bit
kernel: map[10]: type 1, range 64, base f6de0000, size 16, enabled
kernel: pcib1: matched entry for 1.5.INTA (source )
kernel: pcib1: device is hardwired to IRQ 43
kernel: found->	vendor=0x14e4, dev=0x16a7, revid=0x02
kernel: bus=1, slot=5, func=0
kernel: class=02-00-00, hdrtype=0x00, mfdev=0
kernel: cmdreg=0x0156, statreg=0x02b0, cachelnsz=16 (dwords)
kernel: lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0
ns)
kernel: intpin=a, irq=43
kernel: powerspec 2  supports D0 D3  current D0
kernel: MSI supports 8 messages, 64 bit
kernel: bge0: <Broadcom BCM5703 Gigabit Ethernet, ASIC rev. 0x1002> mem
0xf6df0000-0xf6dfffff irq 44 at device 4.0 on pci1
kernel: bge0: Ethernet address: 00:08:02:e0:43:6e
kernel: miibus0: <MII bus> on bge0
kernel: brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0
kernel: brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
1000baseTX, 1000baseTX-FDX, auto
kernel: bge0: bpf attached
kernel: bge1: <Broadcom BCM5703 Gigabit Ethernet, ASIC rev. 0x1002> mem
0xf6de0000-0xf6deffff irq 43 at device 5.0 on pci1
kernel: bge1: Ethernet address: 00:08:02:e0:43:6f
kernel: miibus1: <MII bus> on bge1
kernel: brgphy1: <BCM5703 10/100/1000baseTX PHY> on miibus1
kernel: brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
1000baseTX, 1000baseTX-FDX, auto
kernel: bge1: bpf attached
kernel: pcib2: <ACPI Host-PCI bridge> on acpi0
kernel: ---- initial configuration ------------------------
kernel: ---- before setting priority for links ------------
kernel: ---- before fixup boot-disabled links -------------
kernel: ---- after fixup boot-disabled links --------------
kernel: ---- arbitrated configuration ---------------------
kernel: pci2: <ACPI PCI bus> on pcib2
kernel: pci2: physical bus=2
kernel: map[10]: type 1, range 64, base f6cc0000, size 18, enabled
kernel: map[18]: type 4, range 32, base 00003000, size  8, enabled
kernel: map[1c]: type 3, range 64, base f6bf0000, size 14, enabled
kernel: pcib2: matched entry for 2.14.INTA (source )
kernel: pcib2: device is hardwired to IRQ 19
kernel: found->	vendor=0x0e11, dev=0xb178, revid=0x01
kernel: bus=2, slot=14, func=0
kernel: class=01-04-00, hdrtype=0x00, mfdev=0
kernel: cmdreg=0x0157, statreg=0x02b0, cachelnsz=16 (dwords)
kernel: lattimer=0x47 (2130 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
kernel: intpin=a, irq=19
kernel: powerspec 2  supports D0 D1 D3  current D0
kernel: MSI supports 2 messages, 64 bit
kernel: ciss0: <Compaq Smart Array 5i> port 0x3000-0x30ff mem
0xf6bf0000-0xf6bf3fff,0xf6cc0000-0xf6cfffff irq 19 at device 14.0 on
pci2
kernel: ciss0: using 256 of 1024 available commands
kernel: ciss0:   1 logical drive configured
kernel: ciss0:   firmware 2.38
kernel: ciss0:   2 SCSI channels
kernel: ciss0:   signature 'CISS'
kernel: ciss0:   valence 1
kernel: ciss0:   supported I/O methods 0xe<simple,performant,MEMQ>
kernel: ciss0:   active I/O method 0x3<simple>
kernel: ciss0:   4G page base 0x00000000
kernel: ciss0:   interrupt coalesce delay 1000us
kernel: ciss0:   interrupt coalesce count 16
kernel: ciss0:   max outstanding commands 1024
kernel: ciss0:   bus types 0x2<ultra3>
kernel: ciss0:   server name ''
kernel: ciss0:   heartbeat 0x30000063
kernel: ciss0: 1 logical drive
kernel: ciss0: logical drive 0: RAID 1, 16896MB online
kernel: pcib3: <ACPI Host-PCI bridge> on acpi0
kernel: ---- initial configuration ------------------------
kernel: ---- before setting priority for links ------------
kernel: ---- before fixup boot-disabled links -------------
kernel: ---- after fixup boot-disabled links --------------
kernel: ---- arbitrated configuration ---------------------
kernel: pci3: <ACPI PCI bus> on pcib3
kernel: pci3: physical bus=3
kernel: map[10]: type 1, range 32, base f6af0000, size 12, enabled
kernel: pcib3: matched entry for 3.30.INTA (source )
kernel: pcib3: device is hardwired to IRQ 18
kernel: found->	vendor=0x0e11, dev=0xa0f7, revid=0x14
kernel: bus=3, slot=30, func=0
kernel: class=08-04-00, hdrtype=0x00, mfdev=0
kernel: cmdreg=0x0142, statreg=0x0230, cachelnsz=0 (dwords)
kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
kernel: intpin=a, irq=18
kernel: powerspec 2  supports D0 D3  current D0
kernel: MSI supports 1 message, 64 bit
kernel: pci3: <base peripheral> at device 30.0 (no driver attached)
kernel: pcib4: <ACPI Host-PCI bridge> on acpi0
kernel: ---- initial configuration ------------------------
kernel: ---- before setting priority for links ------------
kernel: ---- before fixup boot-disabled links -------------
kernel: ---- after fixup boot-disabled links --------------
kernel: ---- arbitrated configuration ---------------------
kernel: pci7: <ACPI PCI bus> on pcib4
kernel: pci7: physical bus=7
kernel: map[10]: type 1, range 32, base ef1f0000, size 12, enabled
kernel: pcib4: matched entry for 7.30.INTA (source )
kernel: pcib4: device is hardwired to IRQ 17
kernel: found->	vendor=0x0e11, dev=0xa0f7, revid=0x14
kernel: bus=7, slot=30, func=0
kernel: class=08-04-00, hdrtype=0x00, mfdev=0
kernel: cmdreg=0x0142, statreg=0x0230, cachelnsz=0 (dwords)
kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
kernel: intpin=a, irq=17
kernel: powerspec 2  supports D0 D3  current D0
kernel: MSI supports 1 message, 64 bit
kernel: pci7: <base peripheral> at device 30.0 (no driver attached)
kernel: pcib5: <ACPI Host-PCI bridge> on acpi0
kernel: ---- initial configuration ------------------------
kernel: ---- before setting priority for links ------------
kernel: ---- before fixup boot-disabled links -------------
kernel: ---- after fixup boot-disabled links --------------
kernel: ---- arbitrated configuration ---------------------
kernel: pci11: <ACPI PCI bus> on pcib5
kernel: pci11: physical bus=11
kernel: map[10]: type 1, range 32, base e78f0000, size 12, enabled
kernel: map[14]: type 4, range 32, base 00009000, size  6, enabled
kernel: map[18]: type 1, range 32, base e7700000, size 20, enabled
kernel: pcib5: matched entry for 11.2.INTA (source )
kernel: pcib5: device is hardwired to IRQ 25
kernel: found->	vendor=0x8086, dev=0x1229, revid=0x08
kernel: bus=11, slot=2, func=0
kernel: class=02-00-00, hdrtype=0x00, mfdev=0
kernel: cmdreg=0x0157, statreg=0x0290, cachelnsz=16 (dwords)
kernel: lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38
(14000 ns)
kernel: intpin=a, irq=25
kernel: powerspec 2  supports D0 D1 D2 D3  current D0
kernel: map[10]: type 1, range 32, base e76f0000, size 12, enabled
kernel: pcib5: matched entry for 11.30.INTA (source )
kernel: pcib5: device is hardwired to IRQ 17
kernel: found->	vendor=0x0e11, dev=0xa0f7, revid=0x14
kernel: bus=11, slot=30, func=0
kernel: class=08-04-00, hdrtype=0x00, mfdev=0
kernel: cmdreg=0x0142, statreg=0x0230, cachelnsz=0 (dwords)
kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
kernel: intpin=a, irq=17
kernel: powerspec 2  supports D0 D3  current D0
kernel: MSI supports 1 message, 64 bit
kernel: fxp0: <Intel 82559 Pro/100 Ethernet> port 0x9000-0x903f mem
0xe7700000-0xe77fffff,0xe78f0000-0xe78f0fff irq 25 at device 2.0 on
pci11
kernel: fxp0: using memory space register mapping
kernel: fxp0: Ethernet address 00:90:27:c1:87:2c
kernel: fxp0: PCI IDs: 8086 1229 8086 000e 0008
kernel: fxp0: Dynamic Standby mode is disabled
kernel: miibus2: <MII bus> on fxp0
kernel: inphy0: <i82555 10/100 media interface> on miibus2
kernel: inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
kernel: fxp0: bpf attached
kernel: pci11: <base peripheral> at device 30.0 (no driver attached)
kernel: unknown: not probed (disabled)
last message repeated 31 times
kernel: psmcpnp0 irq 12 on acpi0
kernel: atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on
acpi0
kernel: atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kernel: atkbd: the current kbd controller command byte 0065
kernel: atkbd: keyboard ID 0x41ab (2)
kernel: kbd0 at atkbd0
kernel: kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
kernel: psm0: current command byte:0065
kernel: psm0: failed to reset the aux device.
kernel: sio0: irq maps: 0x4801 0x4811 0x4801 0x4801
kernel: sio0 port 0x3f8-0x3ff irq 4 on acpi0
kernel: sio0: type 16550A
kernel: fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)>
port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
kernel: fdc0: FIFO enabled, 8 bytes threshold
kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0
kernel: unknown: not probed (disabled)
last message repeated 31 times
kernel: npx0: [FAST]
kernel: npx0: <math processor> on motherboard
kernel: npx0: INT 16 interface
kernel: ata: ata0 already exists; skipping it
kernel: ata: ata1 already exists; skipping it
kernel: atkbdc: atkbdc0 already exists; skipping it
kernel: fdc: fdc0 already exists; skipping it
kernel: sio: sio0 already exists; skipping it
kernel: Trying Read_Port at 203
kernel: Trying Read_Port at 243
kernel: Trying Read_Port at 283
kernel: Trying Read_Port at 2c3
kernel: Trying Read_Port at 303
kernel: Trying Read_Port at 343
kernel: Trying Read_Port at 383
kernel: Trying Read_Port at 3c3
kernel: sc: sc0 already exists; skipping it
kernel: vga: vga0 already exists; skipping it
kernel: isa_probe_children: disabling PnP devices
kernel: isa_probe_children: probing non-PnP devices
kernel: orm0: <Option ROM> at iomem 0xee000-0xeffff on isa0
kernel: pmtimer0 on isa0
kernel: adv0: not probed (disabled)
kernel: aha0: not probed (disabled)
kernel: aic0: not probed (disabled)
kernel: bt0: not probed (disabled)
kernel: cs0: not probed (disabled)
kernel: ed0: not probed (disabled)
kernel: fe0: not probed (disabled)
kernel: ie0: not probed (disabled)
kernel: le0: not probed (disabled)
kernel: lnc0: not probed (disabled)
kernel: pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
kernel: pcic1: not probed (disabled)
kernel: ppc0: parallel port not found.
kernel: ppc0: <Parallel port> failed to probe at irq 7 on isa0
kernel: sc0: <System console> at flags 0x100 on isa0
kernel: sc0: VGA <16 virtual consoles, flags=0x300>
kernel: sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
kernel: sio1: configured irq 3 not in bitmap of probed irqs 0
kernel: sio1: port may not be enabled
kernel: sio1: irq maps: 0x4801 0x4801 0x4801 0x4801
kernel: sio1: probe failed test(s): 0 1 2 4 6 7 9
kernel: sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
kernel: sio2: not probed (disabled)
kernel: sio3: not probed (disabled)
kernel: sn0: not probed (disabled)
kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
kernel: fb0: vga0, vga, type:VGA (5), flags:0x7007f
kernel: fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
kernel: fb0: init mode:24, bios mode:3, current mode:24
kernel: fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
kernel: VGA parameters upon power-up
kernel: 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
kernel: bf 1f 00 4f 0d 0e 00 00 06 e0 9c 8e 8f 28 1f 96 
kernel: b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
kernel: 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
kernel: VGA parameters in BIOS for mode 24
kernel: 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
kernel: bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
kernel: b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
kernel: 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
kernel: EGA/VGA parameters to be used for mode 24
kernel: 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
kernel: bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
kernel: b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
kernel: 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
kernel: vt0: not probed (disabled)
kernel: isa_probe_children: probing PnP devices
kernel: Device configuration finished.
kernel: procfs registered
kernel: Timecounter "TSC" frequency 1499467912 Hz quality -100
kernel: Timecounters tick every 10.000 msec
kernel: lo0: bpf attached
kernel: ciss0: *** Cache enabled
kernel: ata0-master: pio=0x0c wdma=0x22 udma=0xffffffff cable=40pin
kernel: acd0: setting PIO4 on ServerWorks CSB5 chip
kernel: acd0: <Compaq DVD-ROM DV28EB 01/D.2F> DVDROM drive at ata0 as
master
kernel: acd0: read 4134KB/s (4134KB/s), 256KB buffer, PIO4
kernel: acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM,
packet
kernel: acd0: Writes:
kernel: acd0: Audio: play, 256 volume levels
kernel: acd0: Mechanism: ejectable tray, unlocked
kernel: acd0: Medium: no/blank disc
kernel: ciss0: command status 0x1 (target status) scsi status 0x2
kernel: (probe0:ciss0:0:0:0): error 22
kernel: (probe0:ciss0:0:0:0): Unretryable Error
kernel: ciss0: command status 0x1 (target status) scsi status 0x2
kernel: (probe0:ciss0:0:0:0): error 22
kernel: (probe0:ciss0:0:0:0): Unretryable Error
kernel: pass0 at ciss0 bus 0 target 0 lun 0
kernel: pass0: <COMPAQ RAID 1  VOLUME OK> Fixed Direct Access SCSI-0
device 
kernel: pass0: 135.168MB/s transfers
kernel: GEOM: create disk da0 dp=0xc7ef8c50
kernel: GEOM: new disk da0
kernel: da0 at ciss0 bus 0 target 0 lun 0
kernel: da0: <COMPAQ RAID 1  VOLUME OK> Fixed Direct Access SCSI-0
device 
kernel: da0: 135.168MB/s transfers
kernel: da0: 17359MB (35553120 512 byte sectors: 255H 32S/T 4357C)
kernel: SMP: AP CPU #6 Launched!
kernel: cpu6 AP:
kernel: ID: 0x06000000   VER: 0x00050014 LDR: 0x14000000 DFR: 0x0fffffff
kernel: lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR:
0x000001ff
kernel: SMP: AP CPU #3 Launched!
kernel: cpu3 AP:
kernel: ID: 0x03000000   VER: 0x00050014 LDR: 0x08000000 DFR: 0x0fffffff
kernel: lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR:
0x000001ff
kernel: SMP: AP CPU #4 Launched!
kernel: cpu4 AP:
kernel: ID: 0x04000000   VER: 0x00050014 LDR: 0x11000000 DFR: 0x0fffffff
kernel: lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR:
0x000001ff
kernel: SMP: AP CPU #2 Launched!
kernel: cpu2 AP:
kernel: ID: 0x02000000   VER: 0x00050014 LDR: 0x04000000 DFR: 0x0fffffff
kernel: lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR:
0x000001ff
kernel: SMP: AP CPU #1 Launched!
kernel: cpu1 AP:
kernel: ID: 0x01000000   VER: 0x00050014 LDR: 0x02000000 DFR: 0x0fffffff
kernel: lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR:
0x000001ff
kernel: SMP: AP CPU #7 Launched!
kernel: cpu7 AP:
kernel: ID: 0x07000000   VER: 0x00050014 LDR: 0x18000000 DFR: 0x0fffffff
kernel: lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR:
0x000001ff
kernel: SMP: AP CPU #5 Launched!
kernel: cpu5 AP:
kernel: ID: 0x05000000   VER: 0x00050014 LDR: 0x12000000 DFR: 0x0fffffff
kernel: lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR:
0x000001ff
kernel: SMP: AP CPU #14 Launched!
kernel: cpu14 AP:
kernel: ID: 0x0e000000   VER: 0x00050014 LDR: 0x34000000 DFR: 0x0fffffff
kernel: lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR:
0x000001ff
kernel: SMP: AP CPU #8 Launched!
kernel: cpu8 AP:
kernel: ID: 0x08000000   VER: 0x00050014 LDR: 0x21000000 DFR: 0x0fffffff
kernel: lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR:
0x000001ff
kernel: SMP: AP CPU #11 Launched!
kernel: cpu11 AP:
kernel: ID: 0x0b000000   VER: 0x00050014 LDR: 0x28000000 DFR: 0x0fffffff
kernel: lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR:
0x000001ff
kernel: SMP: AP CPU #13 Launched!
kernel: cpu13 AP:
kernel: ID: 0x0d000000   VER: 0x00050014 LDR: 0x32000000 DFR: 0x0fffffff
kernel: lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR:
0x000001ff
kernel: SMP: AP CPU #9 Launched!
kernel: cpu9 AP:
kernel: ID: 0x09000000   VER: 0x00050014 LDR: 0x22000000 DFR: 0x0fffffff
kernel: lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR:
0x000001ff
kernel: SMP: AP CPU #10 Launched!
kernel: cpu10 AP:
kernel: ID: 0x0a000000   VER: 0x00050014 LDR: 0x24000000 DFR: 0x0fffffff
kernel: lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR:
0x000001ff
kernel: SMP: AP CPU #12 Launched!
kernel: cpu12 AP:
kernel: ID: 0x0c000000   VER: 0x00050014 LDR: 0x31000000 DFR: 0x0fffffff
kernel: lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR:
0x000001ff
kernel: SMP: AP CPU #15 Launched!
kernel: cpu15 AP:
kernel: ID: 0x0f000000   VER: 0x00050014 LDR: 0x38000000 DFR: 0x0fffffff
kernel: lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR:
0x000001ff
kernel: ioapic0: routing intpin 1 (IRQ 1) to cluster 3
kernel: ioapic0: routing intpin 4 (IRQ 4) to cluster 0
kernel: ioapic0: routing intpin 6 (IRQ 6) to cluster 1
kernel: ioapic0: routing intpin 8 (IRQ 8) to cluster 3
kernel: ioapic0: routing intpin 9 (IRQ 9) to cluster 0
kernel: ioapic0: routing intpin 13 (IRQ 13) to cluster 2
kernel: ioapic0: routing intpin 14 (IRQ 14) to cluster 1
kernel: ioapic0: routing intpin 15 (IRQ 15) to cluster 2
kernel: ioapic1: routing intpin 3 (IRQ 19) to cluster 1
kernel: ioapic1: routing intpin 9 (IRQ 25) to cluster 2
kernel: ioapic2: routing intpin 11 (IRQ 43) to cluster 0
kernel: ioapic2: routing intpin 12 (IRQ 44) to cluster 3
kernel: [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/32 s:32 l:35553088
kernel: [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
kernel: [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
kernel: [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
kernel: GEOM: Configure da0s1, start 16384 length 18203181056 end
18203197439
kernel: ciss0: command status 0x1 (target status) scsi status 0x2
last message repeated 3 times
kernel: GEOM: Configure da0s1a, start 0 length 268435456 end 268435455
kernel: GEOM: Configure da0s1b, start 268435456 length 8589934592 end
8858370047
kernel: GEOM: Configure da0s1c, start 0 length 18203181056 end
18203181055
kernel: GEOM: Configure da0s1d, start 8858370048 length 268435456 end
9126805503
kernel: GEOM: Configure da0s1e, start 9126805504 length 268435456 end
9395240959
kernel: GEOM: Configure da0s1f, start 9395240960 length 8807940096 end
18203181055
kernel: ciss0: command status 0x1 (target status) scsi status 0x2
last message repeated 12 times
kernel: Mounting root from ufs:/dev/da0s1a
kernel: WARNING: / was not properly dismounted
kernel: start_init: trying /sbin/init
kernel: WARNING: /tmp was not properly dismounted
kernel: WARNING: /usr was not properly dismounted
kernel: WARNING: /var was not properly dismounted
kernel: /var: mount pending error: blocks 4 files 2
kernel: bge0: gigabit link up
login: ROOT LOGIN (root) ON ttyv0
fsck: /dev/da0s1d: 24 files, 5568 used, 121271 free (39 frags, 15154
blocks, 0.0% fragmentation) 
login: ROOT LOGIN (root) ON ttyv1
fsck: /dev/da0s1f: 189737 files, 1597135 used, 2567416 free (34120
frags, 316662 blocks, 0.8% fragmentation) 
fsck: /dev/da0s1e: UNREF FILE I=8291  OWNER=root MODE=140666 
fsck: /dev/da0s1e: SIZE=0 MTIME=Nov  6 21:06 2003  (CLEARED) 
fsck: /dev/da0s1e: UNREF FILE I=8314  OWNER=root MODE=100644 
fsck: /dev/da0s1e: SIZE=4 MTIME=Nov  6 21:06 2003  (CLEARED) 
fsck: /dev/da0s1e: Reclaimed: 0 directories, 2 files, 0 fragments 
fsck: /dev/da0s1e: 1056 files, 8962 used, 117877 free (557 frags, 14665
blocks, 0.4% fragmentation) 


From freebsd-questions-local at be-well.ilk.org  Fri Nov  7 06:09:49 2003
From: freebsd-questions-local at be-well.ilk.org (Lowell Gilbert)
Date: Fri Nov  7 06:10:20 2003
Subject: machdep.hlt_logical_cpus
In-Reply-To: <20031105125535.B41708@daemon.g-e-e-k.net>
References: <20031105125535.B41708@daemon.g-e-e-k.net>
Message-ID: <44r80kgthw.fsf@be-well.ilk.org>

Steve Wingate <s.wingate@pobox.com> writes:

> I don't see this as a recognized option in 4.9-STABLE
> 
> daemon# uname -a
> FreeBSD daemon.g-e-e-k.net 4.9-STABLE FreeBSD 4.9-STABLE #11: Wed Oct 29
> 13:08:33 PST 2003     root@daemon.g-e-e-k.net:/usr/obj/usr/src/sys/XEON
> i386
> ------------
> daemon# sysctl machdep.hlt_logical_cpus=0
> sysctl: unknown oid 'machdep.hlt_logical_cpus'

Funny, it looks like it should be there as long as SMP is defined.
Maybe you didn't actually get the bits as of the release?
From jhb at FreeBSD.org  Fri Nov  7 11:03:25 2003
From: jhb at FreeBSD.org (John Baldwin)
Date: Fri Nov  7 11:03:57 2003
Subject: -current 8-way problem: "I/O APIC ID 16 too high"
In-Reply-To: <C50AB9511EE59B49B2A503CB7AE1ABD106610E86@cceexc19.americas.cpqcorp.net>
Message-ID: <XFMail.20031107140259.jhb@FreeBSD.org>


On 07-Nov-2003 Cagle, John (ISS-Houston) wrote:
> I gave the latest kernel a spin on a ProLiant DL740 with 8 physical
> processors installed.
> It paniced during boot with this message:
> 
> MADT: Found IO APIC ID 16, Vector 0 at 0xfec00000
> Panic: madt_parse_apics: I/O APIC ID 16 too high
> 
> This server has IO-APICS that are numbered 16, 17, & 18.  I bumped up
> NIOAPICS and NLAPICS to 32, rebuilt the kernel and now it works!  I've
> attached a kernel boot log below.  Is it OK to run with NIOAPICS > 16?

Yes, that is fine.  NLAPICS probably didn't need to change.  I'll try to
figure out the correct fix for this and commit it.  Thanks for testing!

-- 

John Baldwin <jhb@FreeBSD.org>  <><  http://www.FreeBSD.org/~jhb/
"Power Users Use the Power to Serve!"  -  http://www.FreeBSD.org/
From jesse at wingnet.net  Fri Nov  7 11:40:00 2003
From: jesse at wingnet.net (Jesse Guardiani)
Date: Fri Nov  7 11:40:33 2003
Subject: HEADSUP: Committing new interrupt code, tree will be broken
References: <C50AB9511EE59B49B2A503CB7AE1ABD106610E7F@cceexc19.americas.cpqcorp.net>
Message-ID: <bogse9$579$1@sea.gmane.org>

Cagle, John (ISS-Houston) wrote:

>> -----Original Message-----
>> From: John Baldwin
>>
>> My GENERIC build finished ok, so it should at least be workable for
>> most people.  By the way, if anyone has a machine with 8 or more CPUs
>> (John Cagle, I know you are out there. :)) feel free to test the new
>> code out and post a boot -v dmesg log to the smp@ list.  Thanks.
> 
> Hi John!
> 
> Yes, I'm out here!  ;-)
> 
> Attached below is a dmesg from the ProLiant DL560 which has 4 XEON-HTT
> processors.

Geez. I know what I want for Christmas. :)

-- 
Jesse Guardiani, Systems Administrator
WingNET Internet Services,
P.O. Box 2605 // Cleveland, TN 37320-2605
423-559-LINK (v)  423-559-5145 (f)
http://www.wingnet.net


From bde at zeta.org.au  Sun Nov  9 02:13:01 2003
From: bde at zeta.org.au (Bruce Evans)
Date: Sun Nov  9 02:13:33 2003
Subject: foot-shooting using wrong pcpu
Message-ID: <20031109204643.J2752@gamplex.bde.org>

Does anyone have any experience with the pcpu sometimes being for the
wrong cpu on i386's?  I have a local locking bug which seems to cause
this.  The usual symptoms are that curpmap is sometimes 0 in cpu_switch(),
and cpu_switch() sometimes switches cpuN to run cpuM's idle thread for
M != N (this sometimes appears to work for a few switches but eventually
the stacks trash each other).  Problems in cpu_switch() seem to be
more symptoms than causes.  I can't see how either the pcpu selector
or the pcpu GDT entry could get trashed (aren't these almost constant
after booting?  All lgdt's are early, and %fs is always KPSEL in the
kernel except in the TLB shootdown IPI with default (?) options).  I
mostly look at pcu data in SMPprvspace since %fs is hard to use and
"show pcpu" doesn't show enough, and everything in SMPprvspace seems
reasonable except curpmap is sometimes 0.

Bruce
From maffew at sbcglobal.net  Wed Nov 12 13:09:18 2003
From: maffew at sbcglobal.net (matthew tillman)
Date: Wed Nov 12 13:12:12 2003
Subject: device pcm kills SMP performance -CURRENT
Message-ID: <20031112210917.10741.qmail@web80103.mail.yahoo.com>

Hello-
I have an ACorp 6A815EPD motherboard, Intel i815
chipset, with a pair of P3 733s.  My sound 
card, is a SoundBlaster Live Value.
 
Whenever sound support is compiled in the Kernel,
performance takes a 
huge hit, X runs about the same as on a P2 300 or so. 
But If I boot to 
a kernel that is configured exactly the same, without
device pcm, the system is very 
responsive.
 
Booting to a non-SMP kernel in 5.1-Release with or
without sound support, the system was very fast.  I
did not try no sound support with SMP, as I thought
the issue was only SMP performance in general.

I then CVSuped to -CURRENT on Nov 8th, because at the
time I didn't realise the issue was isolated to the
sound system.  However, I still have the same issue.
 
I also tried swapping the card into a diffrent PCI
slot, but that 
didn't help.
 
Any ideas?
Thanks,
Matthew
From arie at gerszt.ch  Fri Nov 14 10:38:11 2003
From: arie at gerszt.ch (Arie J. Gerszt)
Date: Fri Nov 14 10:38:44 2003
Subject: dell 2450 smp kernel
Message-ID: <FEEHKMHBPPGLAPHJCDIIAECGDKAA.arie@gerszt.ch>

hi,

i am trying to compile a kernel for a dell 2450 smp box,
but i am not sure which options i must include for the 
smp and raid. 

is anybody around here familiar with the dell 2450 and
fbsd? any help would greatly be appreciated,


thanks,
arie


From cfaber at fpsn.net  Sun Nov 16 02:34:23 2003
From: cfaber at fpsn.net (Colin Faber)
Date: Sun Nov 16 02:34:56 2003
Subject: dell 2450 smp kernel
In-Reply-To: <FEEHKMHBPPGLAPHJCDIIAECGDKAA.arie@gerszt.ch>
References: <FEEHKMHBPPGLAPHJCDIIAECGDKAA.arie@gerszt.ch>
Message-ID: <3FB752D8.4030305@fpsn.net>

I believe that machine has a an AMR based card. Dell 3/Si or something along those lines for the 
raid. Other than that standard SMP options apply.

Arie J. Gerszt wrote:

> hi,
> 
> i am trying to compile a kernel for a dell 2450 smp box,
> but i am not sure which options i must include for the 
> smp and raid. 
> 
> is anybody around here familiar with the dell 2450 and
> fbsd? any help would greatly be appreciated,
> 
> 
> thanks,
> arie
> 
> 
> _______________________________________________
> freebsd-smp@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-smp
> To unsubscribe, send any mail to "freebsd-smp-unsubscribe@freebsd.org"
> 
> 

From boesch at fh-vorarlberg.ac.at  Tue Nov 18 05:58:03 2003
From: boesch at fh-vorarlberg.ac.at (Christian Boesch)
Date: Tue Nov 18 05:58:36 2003
Subject: smp on primergy L200
Message-ID: <35A53F58-19CF-11D8-AC24-000393C7BD84@fh-vorarlberg.ac.at>

i installed freebsd 4.9RC1 stable on a fujitsu siemens L200 with 2 cpus 
(P3).
after launching the 2nd cpu the system freezes.
then i tried the patch from 
http://www.freebsd.org/cgi/query-pr.cgi?pr=i386/39234
which i'm using on our p200 and rx300, but on the L200 it doesn't work.
has anyone experience with the L200 and got a smp kernel running?

thanks
chris

-- 
christian boesch | system administrator
fachhochschule vorarlberg | university of applied sciences

From rwatson at freebsd.org  Wed Nov 19 07:04:12 2003
From: rwatson at freebsd.org (Robert Watson)
Date: Wed Nov 19 07:14:23 2003
Subject: device pcm kills SMP performance -CURRENT
In-Reply-To: <20031112210917.10741.qmail@web80103.mail.yahoo.com>
Message-ID: <Pine.NEB.3.96L.1031119100015.7131D-100000@fledge.watson.org>


On Wed, 12 Nov 2003, matthew tillman wrote:

> I have an ACorp 6A815EPD motherboard, Intel i815 chipset, with a pair of
> P3 733s.  My sound card, is a SoundBlaster Live Value. 
>  
> Whenever sound support is compiled in the Kernel, performance takes a
> huge hit, X runs about the same as on a P2 300 or so. But If I boot to a
> kernel that is configured exactly the same, without device pcm, the
> system is very responsive. 
>  
> Booting to a non-SMP kernel in 5.1-Release with or without sound
> support, the system was very fast.  I did not try no sound support with
> SMP, as I thought the issue was only SMP performance in general. 
> 
> I then CVSuped to -CURRENT on Nov 8th, because at the time I didn't
> realise the issue was isolated to the sound system.  However, I still
> have the same issue. 
>  
> I also tried swapping the card into a diffrent PCI slot, but that didn't
> help. 

Just to confirm -- when you upgraded to -CURRENT, did you remove
INVARIANTS and WITNESS from your kernel configuration?  They both add
substantial overhead to locking operations, and while invaluable to
debugging, they can have quite a detrimental affect on performance (see
also UPDATING: Why Is Current Slow?).  5.1-RELEASE has these features
disabled by default, but 5.1-CURRENT has them enabled since there's active
locking work going on.  There's also a set of patches being floated to
improve pcm locking in a variety of ways, but I'm not sure what the status
of those patches is. 

Robert N M Watson             FreeBSD Core Team, TrustedBSD Projects
robert@fledge.watson.org      Network Associates Laboratories


From pwillia at insightbb.com  Wed Nov 19 11:03:27 2003
From: pwillia at insightbb.com (Paul Williams)
Date: Wed Nov 19 11:05:03 2003
Subject: Crashes with sched-bind 
Message-ID: <B5E4A8C96723A94F8E84B8193727E0883F03A4@EXCH01.purdue.lcl>

Hello, 
?
I'm trying to use the sched_bind function in the ULE scheduler. It works
fine when binding the thread to the processor that it is currently on, but
always crashes when sending it to a different processor.
?
Here is info from a representative crash (thread is on cpu1, sending it to
cpu0).? I'm grabbing sched_lock (mtx_lock_spin(&sched_lock)), calling
sched_bind from the thread I want to bind, and giving it a CPU number from
0-3 (quad CPU system). I'm running 5-Current from 14 Nov 03.
?
Any other info necessary or useful to figure out what is going on?
?
Thank you, 
Paul
?
Kernel trap 12 with interrupts disabled
?
?
Fatal trap 12: page fault while in kernel mode
Cupid = 1; apic id = 01
Fault virtual address = 0x4
Fault code = supervisor write, page not present
Instruction pointer = 0x8:0xc0515590
Stack pointer = 0x10:0xebe2bc10
Frame pointer = 0x10:0xebe2bc1c
Code segment = base 0x0, limit 0xfffff, type 0x1b
??????????????????????? = DPL 0, pres 1, def32 1, gran 1
processor eflags = resume, IOPL = 0
current process = 576 (call)
kernel: type 12 trap, code = 0
stopped at runq_add+0x40: orl %eax,0(%edi,%esi,4)
db> trace
runq_add(0,c64afea0,c06bf9ef,3a2,c06eeea0) at runq_add+0x40
sched_switch(c67e8640,9,c06bedf2,1ce,aa426f45) at sched_switch+0x132
mi_switch(c64afea0,0,c06bf9ef,5d9,ebe2bce0) at mi_switch+0x238
sched_bind(c67e8640,0,c6a6674a,39,ebe2bd40) at sched_bind+0x98
process_bind(c67e8640,ebe2bd10,c06d5f72,3ee,0) at process_bind+0xae
syscall(2f,2f,2f,bfbfed48.bfbfed50) at syscall+0x2c0
Xint0x80_syscall() at Xint0x80_syscall+0x1d
--- syscall(210, FreeBSD ELF32, hello). Eip=0x28097d6d, esp = 0xbfbecd0, ebp
= 0xbfbfed20 ---
?

From jhb at FreeBSD.org  Fri Nov  7 10:35:03 2003
From: jhb at FreeBSD.org (John Baldwin)
Date: Mon Jan 26 17:57:30 2004
Subject: Dmesg on 4-way w/HTT (8 procs total)
In-Reply-To: <C50AB9511EE59B49B2A503CB7AE1ABD106610E82@cceexc19.americas.cpqcorp.net>
Message-ID: <XFMail.20031107133437.jhb@FreeBSD.org>


On 07-Nov-2003 Cagle, John (ISS-Houston) wrote:
>> > -----Original Message-----
>> > From: John Baldwin
>> >
>> > My GENERIC build finished ok, so it should at least be workable for
>> > most people.  By the way, if anyone has a machine with 8 or 
>> more CPUs
>> > (John Cagle, I know you are out there. :)) feel free to test the new
>> > code out and post a boot -v dmesg log to the smp@ list.  Thanks.
>> 
>> Hi John!
>> 
>> Yes, I'm out here!  ;-)
>> 
>> Attached below is a dmesg from the ProLiant DL560 which has 4 XEON-HTT
>> processors.  I'll try the 8-way next.  This PAE kernel is from a cvsup
>> early this morning.
>> 
>> Thanks,
>> John Cagle
> 
> Sorry, that wasn't too useful.  I put "-v" in /boot.config but that was
> Pointless.  I've attached a *REAL* boot dmesg with -v below.
> 
> Notice that I've got a Dual-Port NIC in a PCI slot (fxp0&1), and the
> ports
> have IRQ's 26 & 27 now!  Woo Hoo!  Previously that didn't work.

Cool.

> However, it looks like there may be some timer problems in the ACPI code
> since it's complaining that some ACPI timers look bad.

It will still work, just uses a more expensive algorithm.  I'm not sure
why the timing for the ACPI timer would be affected.

-- 

John Baldwin <jhb@FreeBSD.org>  <><  http://www.FreeBSD.org/~jhb/
"Power Users Use the Power to Serve!"  -  http://www.FreeBSD.org/