mpt fails to find disks on LSILogic 1068

Dmitry Sivachenko trtrmitya at gmail.com
Fri Mar 23 13:26:19 UTC 2012


On 23.03.2012 16:39, John Baldwin wrote:
>> pcib0:<ACPI Host-PCI bridge>  port 0xcf8-0xcff on acpi0
>> pcib0: decoding 4 range 0-0xcf7
>> pcib0: decoding 4 range 0xd00-0xffff
>> pcib0: decoding 3 range 0xa0000-0xbffff
>> pcib0: decoding 3 range 0xd0000-0xdffff
>> pcib0: decoding 3 range 0xf0000000-0xfebfffff
>
> This is ok.
>
>> pcib3:<ACPI PCI-PCI bridge>  irq 56 at device 9.0 on pci0
>> pcib0: allocated type 4 (0xd000-0xefff) for rid 1c of pcib3
>> pcib3: failed to allocate initial memory window: 0xfdb00000-0xfebfffff
>
> And here is where it blows up.  That range is in the range of the
> parent bridge (pcib0), so there must be some sort of conflict.
>
> Can you try booting with 'debug.acpi.disabled=sysres'?  Also, can
> you obtain the output of devinfo -rv from a pre-9 kernel?
>

See below (with debug.acpi.disabled=sysres mpt seems to initialize properly).

----------------------------
MP Configuration Table version 1.4 found at 0xffffffff800fcb70
Table 'FACP' at 0xdffb0290
Table 'APIC' at 0xdffb0390
APIC: Found table at 0xdffb0390
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 4 ACPI ID 2: enabled
SMP: Added CPU 4 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 3: enabled
SMP: Added CPU 1 (AP)
MADT: Found CPU APIC ID 5 ACPI ID 4: enabled
SMP: Added CPU 5 (AP)
MADT: Found CPU APIC ID 2 ACPI ID 5: enabled
SMP: Added CPU 2 (AP)
MADT: Found CPU APIC ID 6 ACPI ID 6: enabled
SMP: Added CPU 6 (AP)
MADT: Found CPU APIC ID 3 ACPI ID 7: enabled
SMP: Added CPU 3 (AP)
MADT: Found CPU APIC ID 7 ACPI ID 8: enabled
SMP: Added CPU 7 (AP)
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-STABLE #0: Thu Mar 22 22:31:51 MSK 2012
     root at agata.yandex.ru:/usr/obj/opt/WRK/src/sys/CAVIA amd64
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80ebe000.
Calibrating TSC clock ... TSC clock: 2826312050 Hz
CPU: Intel(R) Xeon(R) CPU           E5440  @ 2.83GHz (2826.31-MHz K8-class CPU)
   Origin = "GenuineIntel"  Id = 0x1067a  Family = 6  Model = 17  Stepping = 10
 
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
 
Features2=0xc0ce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,XSAVE,OSXSAVE>
   AMD Features=0x20100800<SYSCALL,NX,LM>
   AMD Features2=0x1<LAHF>
   TSC: P-state invariant, performance statistics
real memory  = 17716740096 (16896 MB)
Physical memory chunk(s):
0x0000000000010000 - 0x000000000009bfff, 573440 bytes (140 pages)
0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages)
0x0000000000efa000 - 0x00000000dff9ffff, 3741999104 bytes (913574 pages)
0x0000000100000000 - 0x0000000400fa7fff, 12901318656 bytes (3149736 pages)
avail memory = 16600842240 (15831 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <090808 APIC1308>
INTR: Adding local APIC 1 as a target
INTR: Adding local APIC 2 as a target
INTR: Adding local APIC 3 as a target
INTR: Adding local APIC 4 as a target
INTR: Adding local APIC 5 as a target
INTR: Adding local APIC 6 as a target
INTR: Adding local APIC 7 as a target
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 2 package(s) x 4 core(s)
  cpu0 (BSP): APIC ID:  0
  cpu1 (AP): APIC ID:  1
  cpu2 (AP): APIC ID:  2
  cpu3 (AP): APIC ID:  3
  cpu4 (AP): APIC ID:  4
  cpu5 (AP): APIC ID:  5
  cpu6 (AP): APIC ID:  6
  cpu7 (AP): APIC ID:  7
x86bios:  IVT 0x000000-0x0004ff at 0xfffffe0000000000
x86bios: SSEG 0x098000-0x098fff at 0xffffff8000262000
x86bios: EBDA 0x09e000-0x09ffff at 0xfffffe000009e000
x86bios:  ROM 0x0a0000-0x0fefff at 0xfffffe00000a0000
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 3
APIC: CPU 2 has ACPI ID 5
APIC: CPU 3 has ACPI ID 7
APIC: CPU 4 has ACPI ID 2
APIC: CPU 5 has ACPI ID 4
APIC: CPU 6 has ACPI ID 6
APIC: CPU 7 has ACPI ID 8
ULE: setup cpu 0
ULE: setup cpu 1
ULE: setup cpu 2
ULE: setup cpu 3
ULE: setup cpu 4
ULE: setup cpu 5
ULE: setup cpu 6
ULE: setup cpu 7
ACPI: RSDP 0xf9960 00024 (v02 ACPIAM)
ACPI: XSDT 0xdffb0100 00074 (v01 090808 XSDT1308 20080908 MSFT 00000097)
ACPI: FACP 0xdffb0290 000F4 (v03 090808 FACP1308 20080908 MSFT 00000097)
ACPI: DSDT 0xdffb04d0 05414 (v01  CLSea CLSea007 00000007 INTL 20051117)
ACPI: FACS 0xdffbe000 00040
ACPI: APIC 0xdffb0390 000AA (v01 090808 APIC1308 20080908 MSFT 00000097)
ACPI: MCFG 0xdffb0490 0003C (v01 090808 OEMMCFG  20080908 MSFT 00000097)
ACPI: OEMB 0xdffbe040 00071 (v01 090808 OEMB1308 20080908 MSFT 00000097)
ACPI: HPET 0xdffb58f0 00038 (v01 090808 OEMHPET  20080908 MSFT 00000097)
ACPI: ASF! 0xdffb5928 00083 (v32 AMIASF E7230ASF 00000001 INTL 20051117)
ACPI: EINJ 0xdffb59b0 00130 (v01  AMIER AMI_EINJ 20080908 MSFT 00000097)
ACPI: BERT 0xdffb5b40 00030 (v01  AMIER AMI_BERT 20080908 MSFT 00000097)
ACPI: ERST 0xdffb5b70 001B0 (v01  AMIER AMI_ERST 20080908 MSFT 00000097)
ACPI: HEST 0xdffb5d20 000A8 (v01  AMIER AMI_HEST 20080908 MSFT 00000097)
MADT: Found IO APIC ID 8, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Found IO APIC ID 9, Interrupt 24 at 0xfec88000
MADT: Found IO APIC ID 10, Interrupt 48 at 0xfec89000
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
lapic: Routing NMI -> LINT1
lapic: LINT1 trigger: edge
lapic: LINT1 polarity: high
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
cpu0 BSP:
      ID: 0x00000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
   lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
   timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
cpuctl: access to MSR registers/cpuid info.
io: <I/O>
null: <null device, zero device>
acpi0: <090808 XSDT1308> on motherboard
PCIe: Memory Mapped configuration base @ 0xe0000000
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
ACPI: Executed 1 blocks of module-level executable AML code
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 49
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 
0.500000000s)
ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 50
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
hpet0: vendor 0x8086, rev 0x1, 14318180Hz 64bit, 3 timers, legacy route
hpet0:  t0: irqs 0x00f00000 (0), 64bit, periodic
hpet0:  t1: irqs 0x00f00000 (0)
hpet0:  t2: irqs 0x00f00800 (0)
Timecounter "HPET" frequency 14318180 Hz quality 950
ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 51
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0    5   N     0  3 4 5 6 7 10 11 12 14 15
   Validation          0    5   N     0  3 4 5 6 7 10 11 12 14 15
   After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0   14   N     0  3 4 5 6 7 11 12 14 15
   Validation          0   14   N     0  3 4 5 6 7 11 12 14 15
   After Disable       0  255   N     0  3 4 5 6 7 11 12 14 15
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0   11   N     0  3 4 5 6 7 10 11 12 14 15
   Validation          0   11   N     0  3 4 5 6 7 10 11 12 14 15
   After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0   10   N     0  3 4 5 6 7 10 11 12 14 15
   Validation          0   10   N     0  3 4 5 6 7 10 11 12 14 15
   After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link4:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0  255   N     0  3 4 5 6 7 10 11 12 14 15
   Validation          0  255   N     0  3 4 5 6 7 10 11 12 14 15
   After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link5:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0  255   N     0  3 4 5 6 7 10 11 12 14 15
   Validation          0  255   N     0  3 4 5 6 7 10 11 12 14 15
   After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link6:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0  255   N     0  3 4 5 6 7 10 11 12 14 15
   Validation          0  255   N     0  3 4 5 6 7 10 11 12 14 15
   After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link7:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0   15   N     0  3 4 5 6 7 10 11 12 14 15
   Validation          0   15   N     0  3 4 5 6 7 10 11 12 14 15
   After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: decoding 4 range 0-0xcf7
pcib0: decoding 4 range 0xd00-0xffff
pcib0: decoding 3 range 0xa0000-0xbffff
pcib0: decoding 3 range 0xd0000-0xdffff
pcib0: decoding 3 range 0xf0000000-0xfebfffff
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found->	vendor=0x8086, dev=0x4003, revid=0x20
	domain=0, bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0144, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=14
	powerspec 3  supports D0 D3  current D0
	MSI supports 2 messages
pcib0: matched entry for 0.0.INTA
pcib0: slot 0 INTA hardwired to IRQ 17
found->	vendor=0x8086, dev=0x4021, revid=0x20
	domain=0, bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0144, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=5
	powerspec 3  supports D0 D3  current D0
	MSI supports 2 messages
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 48
found->	vendor=0x8086, dev=0x4025, revid=0x20
	domain=0, bus=0, slot=5, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0144, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=5
	powerspec 3  supports D0 D3  current D0
	MSI supports 2 messages
pcib0: matched entry for 0.5.INTA
pcib0: slot 5 INTA hardwired to IRQ 52
found->	vendor=0x8086, dev=0x4029, revid=0x20
	domain=0, bus=0, slot=9, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=5
	powerspec 3  supports D0 D3  current D0
	MSI supports 2 messages
pcib0: matched entry for 0.9.INTA
pcib0: slot 9 INTA hardwired to IRQ 56
found->	vendor=0x8086, dev=0x402f, revid=0x20
	domain=0, bus=0, slot=15, func=0
	class=08-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=5
	powerspec 3  supports D0 D3  current D0
	MSI-X supports 4 messages in map 0x10
	map[10]: type Memory, range 64, base 0xfd7f8000, size 14, enabled
pcib0: allocated type 3 (0xfd7f8000-0xfd7fbfff) for rid 10 of pci0:0:15:0
pcib0: matched entry for 0.15.INTA
pcib0: slot 15 INTA hardwired to IRQ 57
found->	vendor=0x8086, dev=0x4030, revid=0x20
	domain=0, bus=0, slot=16, func=0
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x4030, revid=0x20
	domain=0, bus=0, slot=16, func=1
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x4030, revid=0x20
	domain=0, bus=0, slot=16, func=2
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x4030, revid=0x20
	domain=0, bus=0, slot=16, func=3
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x4030, revid=0x20
	domain=0, bus=0, slot=16, func=4
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x4031, revid=0x20
	domain=0, bus=0, slot=17, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x4035, revid=0x20
	domain=0, bus=0, slot=21, func=0
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x4035, revid=0x20
	domain=0, bus=0, slot=21, func=1
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x4036, revid=0x20
	domain=0, bus=0, slot=22, func=0
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x4036, revid=0x20
	domain=0, bus=0, slot=22, func=1
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2690, revid=0x09
	domain=0, bus=0, slot=28, func=0
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0144, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x2694, revid=0x09
	domain=0, bus=0, slot=28, func=2
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.28.INTC
pcib0: slot 28 INTC hardwired to IRQ 18
found->	vendor=0x8086, dev=0x2696, revid=0x09
	domain=0, bus=0, slot=28, func=3
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=10
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.28.INTD
pcib0: slot 28 INTD hardwired to IRQ 19
found->	vendor=0x8086, dev=0x2688, revid=0x09
	domain=0, bus=0, slot=29, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=15
	map[20]: type I/O Port, range 32, base 0x9880, size  5, enabled
pcib0: allocated type 4 (0x9880-0x989f) for rid 20 of pci0:0:29:0
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found->	vendor=0x8086, dev=0x2689, revid=0x09
	domain=0, bus=0, slot=29, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=10
	map[20]: type I/O Port, range 32, base 0x9c00, size  5, enabled
pcib0: allocated type 4 (0x9c00-0x9c1f) for rid 20 of pci0:0:29:1
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found->	vendor=0x8086, dev=0x268c, revid=0x09
	domain=0, bus=0, slot=29, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=15
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xfd7ffc00, size 10, enabled
pcib0: allocated type 3 (0xfd7ffc00-0xfd7fffff) for rid 10 of pci0:0:29:7
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found->	vendor=0x8086, dev=0x244e, revid=0xd9
	domain=0, bus=0, slot=30, func=0
	class=06-04-01, hdrtype=0x01, mfdev=0
	cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x1b (6750 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2670, revid=0x09
	domain=0, bus=0, slot=31, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0147, statreg=0x0200, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x269b, revid=0x09
	domain=0, bus=0, slot=31, func=3
	class=0c-05-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=14
	map[20]: type I/O Port, range 32, base 0x400, size  5, enabled
pcib0: allocated type 4 (0x400-0x41f) for rid 20 of pci0:0:31:3
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
pcib1: <ACPI PCI-PCI bridge> irq 48 at device 1.0 on pci0
pcib1:   domain            0
pcib1:   secondary bus     11
pcib1:   subordinate bus   11
pcib1:   no prefetched decode
pci11: <ACPI PCI bus> on pcib1
pci11: domain=0, physical bus=11
pcib2: <ACPI PCI-PCI bridge> irq 52 at device 5.0 on pci0
pcib2:   domain            0
pcib2:   secondary bus     10
pcib2:   subordinate bus   10
pcib2:   no prefetched decode
pci10: <ACPI PCI bus> on pcib2
pci10: domain=0, physical bus=10
pcib3: <ACPI PCI-PCI bridge> irq 56 at device 9.0 on pci0
pcib0: allocated type 4 (0xd000-0xefff) for rid 1c of pcib3
pcib0: allocated type 3 (0xfdb00000-0xfebfffff) for rid 20 of pcib3
pcib3:   domain            0
pcib3:   secondary bus     5
pcib3:   subordinate bus   9
pcib3:   I/O decode        0xd000-0xefff
pcib3:   memory decode     0xfdb00000-0xfebfffff
pcib3:   no prefetched decode
pci5: <ACPI PCI bus> on pcib3
pci5: domain=0, physical bus=5
found->	vendor=0x8086, dev=0x3500, revid=0x01
	domain=0, bus=5, slot=0, func=0
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D3  current D0
pcib3: matched entry for 5.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x350c, revid=0x01
	domain=0, bus=5, slot=0, func=3
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci5
pcib3: allocated I/O port range (0xe000-0xefff) for rid 1c of pcib4
pcib3: allocated memory range (0xfdf00000-0xfebfffff) for rid 20 of pcib4
pcib4:   domain            0
pcib4:   secondary bus     7
pcib4:   subordinate bus   9
pcib4:   I/O decode        0xe000-0xefff
pcib4:   memory decode     0xfdf00000-0xfebfffff
pcib4:   no prefetched decode
pci7: <ACPI PCI bus> on pcib4
pci7: domain=0, physical bus=7
found->	vendor=0x8086, dev=0x3510, revid=0x01
	domain=0, bus=7, slot=0, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0144, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
found->	vendor=0x8086, dev=0x3518, revid=0x01
	domain=0, bus=7, slot=2, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
pcib5: <ACPI PCI-PCI bridge> at device 0.0 on pci7
pcib5:   domain            0
pcib5:   secondary bus     9
pcib5:   subordinate bus   9
pcib5:   no prefetched decode
pci9: <ACPI PCI bus> on pcib5
pci9: domain=0, physical bus=9
pcib6: <ACPI PCI-PCI bridge> at device 2.0 on pci7
pcib4: allocated I/O port range (0xe000-0xefff) for rid 1c of pcib6
pcib4: allocated memory range (0xfdf00000-0xfdffffff) for rid 20 of pcib6
pcib6:   domain            0
pcib6:   secondary bus     8
pcib6:   subordinate bus   8
pcib6:   I/O decode        0xe000-0xefff
pcib6:   memory decode     0xfdf00000-0xfdffffff
pcib6:   no prefetched decode
pci8: <ACPI PCI bus> on pcib6
pci8: domain=0, physical bus=8
found->	vendor=0x8086, dev=0x1096, revid=0x01
	domain=0, bus=8, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 32, base 0xfdfa0000, size 17, enabled
pcib6: allocated memory range (0xfdfa0000-0xfdfbffff) for rid 10 of pci0:8:0:0
	map[18]: type I/O Port, range 32, base 0xe880, size  5, enabled
pcib6: allocated I/O port range (0xe880-0xe89f) for rid 18 of pci0:8:0:0
pcib6: matched entry for 8.0.INTA
pcib6: slot 0 INTA hardwired to IRQ 18
found->	vendor=0x8086, dev=0x1096, revid=0x01
	domain=0, bus=8, slot=0, func=1
	class=02-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=10
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 32, base 0xfdfe0000, size 17, enabled
pcib6: allocated memory range (0xfdfe0000-0xfdffffff) for rid 10 of pci0:8:0:1
	map[18]: type I/O Port, range 32, base 0xec00, size  5, enabled
pcib6: allocated I/O port range (0xec00-0xec1f) for rid 18 of pci0:8:0:1
pcib6: matched entry for 8.0.INTB
pcib6: slot 0 INTB hardwired to IRQ 19
em0: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0xe880-0xe89f mem 
0xfdfa0000-0xfdfbffff irq 18 at device 0.0 on pci8
em0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 256 to local APIC 0 vector 52
em0: using IRQ 256 for MSI
em0: Using an MSI interrupt
em0: bpf attached
em0: Ethernet address: 00:22:15:31:2b:b0
em1: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0xec00-0xec1f mem 
0xfdfe0000-0xfdffffff irq 19 at device 0.1 on pci8
em1: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 257 to local APIC 0 vector 53
em1: using IRQ 257 for MSI
em1: Using an MSI interrupt
em1: bpf attached
em1: Ethernet address: 00:22:15:31:2b:b1
pcib7: <ACPI PCI-PCI bridge> at device 0.3 on pci5
pcib3: allocated I/O port range (0xd000-0xdfff) for rid 1c of pcib7
pcib3: allocated memory range (0xfdc00000-0xfdefffff) for rid 20 of pcib7
pcib7:   domain            0
pcib7:   secondary bus     6
pcib7:   subordinate bus   6
pcib7:   I/O decode        0xd000-0xdfff
pcib7:   memory decode     0xfdc00000-0xfdefffff
pcib7:   no prefetched decode
pci6: <ACPI PCI bus> on pcib7
pci6: domain=0, physical bus=6
found->	vendor=0x1000, dev=0x0054, revid=0x02
	domain=0, bus=6, slot=3, func=0
	class=01-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0157, statreg=0x0230, cachelnsz=16 (dwords)
	lattimer=0x50 (2400 ns), mingnt=0x40 (16000 ns), maxlat=0x0a (2500 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	MSI supports 1 message, 64 bit
	MSI-X supports 1 message in map 0x14
	map[10]: type I/O Port, range 32, base 0xd000, size  8, enabled
pcib7: allocated I/O port range (0xd000-0xd0ff) for rid 10 of pci0:6:3:0
	map[14]: type Memory, range 64, base 0xfdefc000, size 14, enabled
pcib7: allocated memory range (0xfdefc000-0xfdefffff) for rid 14 of pci0:6:3:0
	map[1c]: type Memory, range 64, base 0xfdee0000, size 16, enabled
pcib7: allocated memory range (0xfdee0000-0xfdeeffff) for rid 1c of pci0:6:3:0
pcib7: matched entry for 6.3.INTA
pcib7: slot 3 INTA hardwired to IRQ 26
mpt0: <LSILogic SAS/SATA Adapter> port 0xd000-0xd0ff mem 
0xfdefc000-0xfdefffff,0xfdee0000-0xfdeeffff irq 26 at device 3.0 on pci6
mpt0: attempting to allocate 1 MSI-X vectors (1 supported)
msi: routing MSI-X IRQ 258 to local APIC 0 vector 54
mpt0: using IRQ 258 for MSI-X
mpt0: MPI Version=1.5.16.0
mpt0: chain depth limited to 34 (from 2040)
mpt0: Maximum Segment Count: 306, Maximum CAM Segment Count: 33
mpt0: MsgLength=20 IOCNumber = 0
mpt0: IOCFACTS: GlobalCredits=286 BlockSize=8 bytes Request Frame Size 128 
bytes Max Chain Depth 34
mpt0: IOCFACTS: Num Ports 1, FWImageSize 0, Flags=0x2
mpt0: No Handlers For Any Event Notify Frames. Event 0xa (ACK not required).
mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required).
mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required).
mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required).
mpt0: No Handlers For Any Event Notify Frames. Event 0x12 (ACK not required).
mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required).
mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required).
mpt0: No Handlers For Any Event Notify Frames. Event 0x12 (ACK not required).
mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required).
mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required).
mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required).
mpt0: No Handlers For Any Event Notify Frames. Event 0xf (ACK required).
mpt0: No Handlers For Any Event Notify Frames. Event 0xf (ACK required).
mpt0: Capabilities: ( RAID-0 RAID-1E RAID-1 )
mpt0: 0 Active Volumes (2 Max)
mpt0: 0 Hidden Drive Members (14 Max)
mpt0: No Handlers For Any Event Notify Frames. Event 0xa (ACK not required).
pci0: <base peripheral> at device 15.0 (no driver attached)
pcib8: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pcib8:   domain            0
pcib8:   secondary bus     4
pcib8:   subordinate bus   4
pcib8:   no prefetched decode
pci4: <ACPI PCI bus> on pcib8
pci4: domain=0, physical bus=4
pcib9: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pcib0: allocated type 4 (0xc000-0xcfff) for rid 1c of pcib9
pcib0: allocated type 3 (0xfda00000-0xfdafffff) for rid 20 of pcib9
pcib9:   domain            0
pcib9:   secondary bus     3
pcib9:   subordinate bus   3
pcib9:   I/O decode        0xc000-0xcfff
pcib9:   memory decode     0xfda00000-0xfdafffff
pcib9:   no prefetched decode
pci3: <ACPI PCI bus> on pcib9
pci3: domain=0, physical bus=3
found->	vendor=0x8086, dev=0x109a, revid=0x00
	domain=0, bus=3, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 32, base 0xfdae0000, size 17, enabled
pcib9: allocated memory range (0xfdae0000-0xfdafffff) for rid 10 of pci0:3:0:0
	map[18]: type I/O Port, range 32, base 0xcc00, size  5, enabled
pcib9: allocated I/O port range (0xcc00-0xcc1f) for rid 18 of pci0:3:0:0
pcib9: matched entry for 3.0.INTA
pcib9: slot 0 INTA hardwired to IRQ 18
em2: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0xcc00-0xcc1f mem 
0xfdae0000-0xfdafffff irq 18 at device 0.0 on pci3
em2: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 259 to local APIC 0 vector 55
em2: using IRQ 259 for MSI
em2: Using an MSI interrupt
em2: bpf attached
em2: Ethernet address: 00:22:15:31:28:17
pcib10: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pcib0: allocated type 4 (0xb000-0xbfff) for rid 1c of pcib10
pcib0: allocated type 3 (0xfd900000-0xfd9fffff) for rid 20 of pcib10
pcib10:   domain            0
pcib10:   secondary bus     2
pcib10:   subordinate bus   2
pcib10:   I/O decode        0xb000-0xbfff
pcib10:   memory decode     0xfd900000-0xfd9fffff
pcib10:   no prefetched decode
pci2: <ACPI PCI bus> on pcib10
pci2: domain=0, physical bus=2
found->	vendor=0x8086, dev=0x109a, revid=0x00
	domain=0, bus=2, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 32, base 0xfd9e0000, size 17, enabled
pcib10: allocated memory range (0xfd9e0000-0xfd9fffff) for rid 10 of pci0:2:0:0
	map[18]: type I/O Port, range 32, base 0xbc00, size  5, enabled
pcib10: allocated I/O port range (0xbc00-0xbc1f) for rid 18 of pci0:2:0:0
pcib10: matched entry for 2.0.INTA
pcib10: slot 0 INTA hardwired to IRQ 19
em3: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0xbc00-0xbc1f mem 
0xfd9e0000-0xfd9fffff irq 19 at device 0.0 on pci2
em3: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 260 to local APIC 0 vector 56
em3: using IRQ 260 for MSI
em3: Using an MSI interrupt
em3: bpf attached
em3: Ethernet address: 00:22:15:31:29:d4
uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port 0x9880-0x989f irq 
23 at device 29.0 on pci0
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 57
usbus0: <Intel 631XESB/632XESB/3100 USB controller USB-1> on uhci0
usbus0: bpf attached
uhci0: usbpf: Attached
uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port 0x9c00-0x9c1f irq 
19 at device 29.1 on pci0
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 58
usbus1: <Intel 631XESB/632XESB/3100 USB controller USB-2> on uhci1
usbus1: bpf attached
uhci1: usbpf: Attached
ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xfd7ffc00-0xfd7fffff irq 23 at 
device 29.7 on pci0
usbus2: EHCI version 1.0
usbus2: <Intel 63XXESB USB 2.0 controller> on ehci0
usbus2: bpf attached
ehci0: usbpf: Attached
pcib11: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib0: allocated type 4 (0xa000-0xafff) for rid 1c of pcib11
pcib0: allocated type 3 (0xfd800000-0xfd8fffff) for rid 20 of pcib11
pcib0: allocated type 3 (0xf8000000-0xfbffffff) for rid 24 of pcib11
pcib11:   domain            0
pcib11:   secondary bus     1
pcib11:   subordinate bus   1
pcib11:   I/O decode        0xa000-0xafff
pcib11:   memory decode     0xfd800000-0xfd8fffff
pcib11:   prefetched decode 0xf8000000-0xfbffffff
pcib11:   Subtractively decoded bridge.
pci1: <ACPI PCI bus> on pcib11
pci1: domain=0, physical bus=1
found->	vendor=0x18ca, dev=0x0020, revid=0x00
	domain=0, bus=1, slot=2, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0003, statreg=0x0230, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Prefetchable Memory, range 32, base 0xf8000000, size 26, enabled
pcib11: allocated prefetch range (0xf8000000-0xfbffffff) for rid 10 of pci0:1:2:0
	map[14]: type Memory, range 32, base 0xfd8c0000, size 18, enabled
pcib11: allocated memory range (0xfd8c0000-0xfd8fffff) for rid 14 of pci0:1:2:0
	map[18]: type I/O Port, range 32, base 0xac00, size  7, enabled
pcib11: allocated I/O port range (0xac00-0xac7f) for rid 18 of pci0:1:2:0
vgapci0: <VGA-compatible display> port 0xac00-0xac7f mem 
0xf8000000-0xfbffffff,0xfd8c0000-0xfd8fffff at device 2.0 on pci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ichsmb0: <Intel 631xESB/6321ESB (ESB2) SMBus controller> port 0x400-0x41f irq 
19 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 59
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 60
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4-00, 5 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 61
uart0: fast interrupt
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 0 vector 62
uart1: fast interrupt
acpi0: wakeup code va 0xffffff8401d43000 pa 0x90000
ahc_isa_probe 0: ioport 0xc00 alloc failed
ahc_isa_probe 1: ioport 0x1c00 alloc failed
ahc_isa_probe 2: ioport 0x2c00 alloc failed
ahc_isa_probe 3: ioport 0x3c00 alloc failed
ahc_isa_probe 4: ioport 0x4c00 alloc failed
ahc_isa_probe 5: ioport 0x5c00 alloc failed
ahc_isa_probe 6: ioport 0x6c00 alloc failed
ahc_isa_probe 7: ioport 0x7c00 alloc failed
ahc_isa_probe 8: ioport 0x8c00 alloc failed
ahc_isa_probe 9: ioport 0x9c00 alloc failed
ahc_isa_probe 10: ioport 0xac00 alloc failed
ahc_isa_probe 11: ioport 0xbc00 alloc failed
ahc_isa_probe 12: ioport 0xcc00 alloc failed
ahc_isa_probe 13: ioport 0xdc00 alloc failed
ahc_isa_probe 14: ioport 0xec00 alloc failed
isab0: found ICH8 or equivalent chipset: Intel 63XXESB watchdog timer
pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0
pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0
pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0
pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0
pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0
pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0
pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0
pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0
pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0
pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0
pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0
pcib0: allocated type 3 (0xd0000-0xd07ff) for rid 3 of orm0
pcib0: allocated type 3 (0xd0000-0xd0fff) for rid 3 of orm0
pcib0: allocated type 3 (0xd1000-0xd17ff) for rid 4 of orm0
pcib0: allocated type 3 (0xd1000-0xd1fff) for rid 4 of orm0
pcib0: allocated type 3 (0xd2000-0xd27ff) for rid 5 of orm0
pcib0: allocated type 3 (0xd2800-0xd2fff) for rid 5 of orm0
pcib0: allocated type 3 (0xd3000-0xd37ff) for rid 5 of orm0
pcib0: allocated type 3 (0xd3800-0xd3fff) for rid 5 of orm0
pcib0: allocated type 3 (0xd4000-0xd47ff) for rid 5 of orm0
pcib0: allocated type 3 (0xd4800-0xd4fff) for rid 5 of orm0
pcib0: allocated type 3 (0xd5000-0xd57ff) for rid 5 of orm0
pcib0: allocated type 3 (0xd5800-0xd5fff) for rid 5 of orm0
pcib0: allocated type 3 (0xd6000-0xd67ff) for rid 5 of orm0
pcib0: allocated type 3 (0xd6800-0xd6fff) for rid 5 of orm0
pcib0: allocated type 3 (0xd7000-0xd77ff) for rid 5 of orm0
pcib0: allocated type 3 (0xd7800-0xd7fff) for rid 5 of orm0
pcib0: allocated type 3 (0xd8000-0xd87ff) for rid 5 of orm0
pcib0: allocated type 3 (0xd8800-0xd8fff) for rid 5 of orm0
pcib0: allocated type 3 (0xd9000-0xd97ff) for rid 5 of orm0
pcib0: allocated type 3 (0xd9800-0xd9fff) for rid 5 of orm0
pcib0: allocated type 3 (0xda000-0xda7ff) for rid 5 of orm0
pcib0: allocated type 3 (0xda800-0xdafff) for rid 5 of orm0
pcib0: allocated type 3 (0xdb000-0xdb7ff) for rid 5 of orm0
pcib0: allocated type 3 (0xdb800-0xdbfff) for rid 5 of orm0
pcib0: allocated type 3 (0xdc000-0xdc7ff) for rid 5 of orm0
pcib0: allocated type 3 (0xdc800-0xdcfff) for rid 5 of orm0
pcib0: allocated type 3 (0xdd000-0xdd7ff) for rid 5 of orm0
pcib0: allocated type 3 (0xdd800-0xddfff) for rid 5 of orm0
pcib0: allocated type 3 (0xde000-0xde7ff) for rid 5 of orm0
pcib0: allocated type 3 (0xde800-0xdefff) for rid 5 of orm0
pcib0: allocated type 3 (0xdf000-0xdf7ff) for rid 5 of orm0
pcib0: allocated type 3 (0xdf800-0xdffff) for rid 5 of orm0
isa_probe_children: disabling PnP devices
ichwd0: <Intel 63XXESB watchdog timer> on isa0
isab0: found ICH8 or equivalent chipset: Intel 63XXESB watchdog timer
pcib0: allocated type 4 (0x830-0x837) for rid 0 of ichwd0
pcib0: allocated type 4 (0x860-0x87f) for rid 1 of ichwd0
ichwd0: Intel 63XXESB watchdog timer (ICH8 or equivalent)
ichwd0: timer disabled
ipmi0: <IPMI System Interface> on isa0
ipmi0: KCS mode found at io 0xca2 alignment 0x1 on isa
pcib0: allocated type 4 (0xca2-0xca3) for rid 0 of ipmi0
ipmi0: couldn't find it
device_attach: ipmi0 attach returned 6
atkbdc: atkbdc0 already exists; skipping it
atrtc: atrtc0 already exists; skipping it
attimer: attimer0 already exists; skipping it
sc: sc0 already exists; skipping it
uart: uart0 already exists; skipping it
uart: uart1 already exists; skipping it
isa_probe_children: probing non-PnP devices
ipmi0: <IPMI System Interface> at port 0xca2-0xca3 on isa0
ipmi0: KCS mode found at io 0xca2 alignment 0x1 on isa
pcib0: allocated type 4 (0xca2-0xca3) for rid 0 of ipmi0
ipmi0: couldn't find it
device_attach: ipmi0 attach returned 6
orm0: <ISA Option ROMs> at iomem 
0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xc9fff,0xd0000-0xd0fff,0xd1000-0xd1fff 
on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
pcib0: allocated type 4 (0x3c0-0x3df) for rid 0 of vga0
pcib0: allocated type 3 (0xa0000-0xbffff) for rid 0 of vga0
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
ppc0 failed to probe at irq 7 on isa0
isa_probe_children: probing PnP devices
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
coretemp0: Setting TjMax=100
est0: enabling SpeedStep
est0: failed to enable SpeedStep
p4tcc0: <CPU Frequency Thermal Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
coretemp1: Setting TjMax=100
est1: enabling SpeedStep
est1: failed to enable SpeedStep
p4tcc1: <CPU Frequency Thermal Control> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
coretemp2: Setting TjMax=100
est2: enabling SpeedStep
est2: failed to enable SpeedStep
p4tcc2: <CPU Frequency Thermal Control> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
coretemp3: Setting TjMax=100
est3: enabling SpeedStep
est3: failed to enable SpeedStep
p4tcc3: <CPU Frequency Thermal Control> on cpu3
coretemp4: <CPU On-Die Thermal Sensors> on cpu4
coretemp4: Setting TjMax=100
est4: enabling SpeedStep
est4: failed to enable SpeedStep
p4tcc4: <CPU Frequency Thermal Control> on cpu4
coretemp5: <CPU On-Die Thermal Sensors> on cpu5
coretemp5: Setting TjMax=100
est5: enabling SpeedStep
est5: failed to enable SpeedStep
p4tcc5: <CPU Frequency Thermal Control> on cpu5
coretemp6: <CPU On-Die Thermal Sensors> on cpu6
coretemp6: Setting TjMax=100
est6: enabling SpeedStep
est6: failed to enable SpeedStep
p4tcc6: <CPU Frequency Thermal Control> on cpu6
coretemp7: <CPU On-Die Thermal Sensors> on cpu7
coretemp7: Setting TjMax=100
est7: enabling SpeedStep
est7: failed to enable SpeedStep
p4tcc7: <CPU Frequency Thermal Control> on cpu7
Device configuration finished.
linprocfs registered
linsysfs registered
procfs registered
Timecounters tick every 1.000 msec
vlan: initialized, using hash tables with chaining
Linux ELF exec handler installed
ipfw2 (+ipv6) initialized, divert enabled, nat loadable, rule-based forwarding 
enabled, default to accept, logging disabled
ipfw0: bpf attached
DUMMYNET 0 with IPv6 initialized (100409)
lo0: bpf attached
load_dn_sched dn_sched FIFO loaded
load_dn_sched dn_sched PRIO loaded
load_dn_sched dn_sched QFQ loaded
load_dn_sched dn_sched RR loaded
load_dn_sched dn_sched WF2Q+ loaded
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 4 ports with 4 removable, self powered
(probe63:mpt0:1:0:0): Error 6, Unretryable error
(probe64:mpt0:1:1:0): Error 6, Unretryable error
(probe65:mpt0:1:2:0): Error 6, Unretryable error
(probe66:mpt0:1:3:0): Error 6, Unretryable error
(probe67:mpt0:1:4:0): Error 6, Unretryable error
(probe68:mpt0:1:5:0): Error 6, Unretryable error
(probe69:mpt0:1:6:0): Error 6, Unretryable error
(probe70:mpt0:1:7:0): Error 6, Unretryable error
(probe71:mpt0:1:8:0): Error 6, Unretryable error
(probe72:mpt0:1:9:0): Error 6, Unretryable error
(probe73:mpt0:1:10:0): Error 6, Unretryable error
(probe74:mpt0:1:11:0): Error 6, Unretryable error
(probe75:mpt0:1:12:0): Error 6, Unretryable error
(probe76:mpt0:1:13:0): Error 6, Unretryable error
pass0 at mpt0 bus 0 scbus0 target 4 lun 0
pass0: <SEAGATE ST3146855SS S527> Fixed Direct Access SCSI-5 device
pass0: Serial Number 3LN0PSSM
pass0: 300.000MB/s transfers
pass0: Command Queueing enabled
pass1 at mpt0 bus 0 scbus0 target 5 lun 0
pass1: <SEAGATE ST3146855SS S527> Fixed Direct Access SCSI-5 device
pass1: Serial Number 3LN397KJ
pass1: 300.000MB/s transfers
pass1: Command Queueing enabled
ATA PseudoRAID loaded
SMP: AP CPU #5 Launched!
cpu5 AP:
      ID: 0x05000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
   lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
   timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
SMP: AP CPU #7 Launched!
cpu7 AP:
      ID: 0x07000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
   lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
   timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
SMP: AP CPU #4 Launched!
cpu4 AP:
      ID: 0x04000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
   lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
   timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
SMP: AP CPU #6 Launched!
cpu6 AP:
      ID: 0x06000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
   lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
   timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
SMP: AP CPU #1 Launched!
cpu1 AP:
      ID: 0x01000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
   lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
   timer: 0x000100ef therm: 0x00010000 err: 0x000000f0(da0: pmc: 0x00010400
mpt0:0:4:0): SCSI status error
(da0:mpt0:0:4:0): SERVICE ACTION IN(16). CDB: 9e 10 0 0 0 0 0 0 0 0 0 0 0 10 0 0
(da0:mpt0:0:4:0): CAM status: SCSI Status Error
(da0:mpt0:0:4:0): SCSI status: Check Condition
(da0:mpt0:0:4:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command 
operation code)
SMP: AP CPU #3 Launched!
(da0:mpt0:0:4:0): Field Replaceable Unit: 1
cpu3 AP:
(da0:mpt0:0:4:0): Command byte 0 bit 7 is invalid
      ID: 0x03000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
   lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
(da0:  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0mpt0:0: pmc: 0x00010400
4:0): Error 22, Unretryable error
SMP: AP CPU #2 Launched!
cpu2 AP:
      ID: 0x02000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
   lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
   timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
GEOM: new disk da0
GEOM: new disk da1
SMP: passed TSC synchronization test
TSC timecounter discards lower 8 bit(s)
Timecounter "TSC-low" frequency 11040281 Hz quality 1000
(da1:mpt0:0:5:0): SCSI status error
(da1:mpt0:0:5:0): SERVICE ACTION IN(16). CDB: 9e 10 0 0 0 0 0 0 0 0 0 0 0 10 0 0
hwpmc:(da1:mpt0:0:5:0): CAM status: SCSI Status Error
  TSC/1/64/0x20<REA>(da1:mpt0:0:5:0): SCSI status: Check Condition
  IAP/2/40/0x3ff<INT,USR,SYS,EDG,THR,REA,WRI,INV,QUA,PRC>(da1:mpt0:0:5:0): SCSI 
sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code)
  IAF/3/40/0x61<INT,REA,WRI>
(da1:mpt0:0:5:0): Field Replaceable Unit: 1
(da1:mpt0:0:5:0): Command byte 0 bit 7 is invalid
(da1:mpt0:0:5:0): Error 22, Unretryable error
da0 at mpt0 bus 0 scbus0 target 4 lun 0
da0: <SEAGATE ST3146855SS S527> Fixed Direct Access SCSI-5 device
da0: Serial Number 3LN0PSSM
da0: 300.000MB/s transfers
da0: Command Queueing enabled
da0: 140014MB (286749480 512 byte sectors: 255H 63S/T 17849C)
da1 at mpt0 bus 0 scbus0 target 5 lun 0
da1: <SEAGATE ST3146855SS S527> Fixed Direct Access SCSI-5 device
da1: Serial Number 3LN397KJ
da1: 300.000MB/s transfers
da1: Command Queueing enabled
da1: 140014MB (286749480 512 byte sectors: 255H 63S/T 17849C)
GEOM_MIRROR: Device mirror/root launched (2/2).
GEOM_MIRROR: Device mirror/var launched (2/2).
GEOM_MIRROR: Device mirror/place launched (2/2).
Trying to mount root from nfs: []...


---------------------------------
 From FreeBSD-7.3:


nexus0
   acpi0
       Interrupt request lines:
           9
       I/O ports:
           0x10-0x1f
           0x22-0x3f
           0x44-0x4f
           0x50-0x5f
           0x62-0x63
           0x65-0x6f
           0x72-0x7f
           0x80
           0x84-0x86
           0x88
           0x8c-0x8e
           0x90-0x9f
           0xa2-0xbf
           0xe0-0xef
           0x480-0x4bf
           0x4d0-0x4d1
           0x800-0x87f
           0xa00-0xa0f
           0xa10-0xa1f
       I/O memory addresses:
           0xc0000-0xcffff
           0xe0000-0xfffff
           0xe0000000-0xefffffff
           0xfe000000-0xfebfffff
           0xfec00000-0xffffffff
     cpu0 pnpinfo _HID=none _UID=0 at handle=\_PR_.P001
       acpi_throttle0
           ACPI I/O ports:
               0x810-0x813
       coretemp0
       cpufreq0
     cpu1 pnpinfo _HID=none _UID=0 at handle=\_PR_.CPU1
       acpi_throttle1
       coretemp1
     cpu2 pnpinfo _HID=none _UID=0 at handle=\_PR_.P002
       coretemp2
     cpu3 pnpinfo _HID=none _UID=0 at handle=\_PR_.CPU2
       coretemp3
     cpu4 pnpinfo _HID=none _UID=0 at handle=\_PR_.P003
       coretemp4
     cpu5 pnpinfo _HID=none _UID=0 at handle=\_PR_.CPU3
       coretemp5
     cpu6 pnpinfo _HID=none _UID=0 at handle=\_PR_.P004
       coretemp6
     cpu7 pnpinfo _HID=none _UID=0 at handle=\_PR_.CPU4
       coretemp7
     unknown pnpinfo _HID=none _UID=0 at handle=\_PR_.P005
     unknown pnpinfo _HID=none _UID=0 at handle=\_PR_.CPU5
     unknown pnpinfo _HID=none _UID=0 at handle=\_PR_.P006
     unknown pnpinfo _HID=none _UID=0 at handle=\_PR_.CPU6
     unknown pnpinfo _HID=none _UID=0 at handle=\_PR_.P007
     unknown pnpinfo _HID=none _UID=0 at handle=\_PR_.CPU7
     unknown pnpinfo _HID=none _UID=0 at handle=\_PR_.P008
     unknown pnpinfo _HID=none _UID=0 at handle=\_PR_.CPU8
     pcib0 pnpinfo _HID=PNP0A08 _UID=0 at handle=\_SB_.PCI0
       pci0
           I/O memory addresses:
               0xfd7f8000-0xfd7fbfff
         hostb0 pnpinfo vendor=0x8086 device=0x4003 subvendor=0x1043 
subdevice=0x82aa class=0x060000 at slot=0 function=0
         pcib1 pnpinfo vendor=0x8086 device=0x4021 subvendor=0x8086 
subdevice=0x8086 class=0x060400 at slot=1 function=0 handle=\_SB_.PCI0.NPE1
           pci11
         pcib2 pnpinfo vendor=0x8086 device=0x4025 subvendor=0x8086 
subdevice=0x8086 class=0x060400 at slot=5 function=0 handle=\_SB_.PCI0.NPE5
           pci10
         pcib3 pnpinfo vendor=0x8086 device=0x4029 subvendor=0x8086 
subdevice=0x8086 class=0x060400 at slot=9 function=0 handle=\_SB_.PCI0.NPES
           pci5
             pcib4 pnpinfo vendor=0x8086 device=0x3500 subvendor=0x0000 
subdevice=0x0000 class=0x060400 at slot=0 function=0 handle=\_SB_.PCI0.NPES.SPE4
               pci7
                 pcib5 pnpinfo vendor=0x8086 device=0x3510 subvendor=0x0000 
subdevice=0x0000 class=0x060400 at slot=0 function=0 
handle=\_SB_.PCI0.NPES.SPE4.SPE1
                   pci9
                 pcib6 pnpinfo vendor=0x8086 device=0x3518 subvendor=0x0000 
subdevice=0x0000 class=0x060400 at slot=2 function=0 
handle=\_SB_.PCI0.NPES.SPE4.P8PC
                   pci8
                       I/O ports:
                           0xe880-0xe89f
                           0xec00-0xec1f
                     em0 pnpinfo vendor=0x8086 device=0x1096 subvendor=0x1043 
subdevice=0x8217 class=0x020000 at slot=0 function=0 
handle=\_SB_.PCI0.NPES.SPE4.P8PC.LAN0
                         Interrupt request lines:
                             256
                         I/O memory addresses:
                             0xfdfa0000-0xfdfbffff
                     em1 pnpinfo vendor=0x8086 device=0x1096 subvendor=0x1043 
subdevice=0x8217 class=0x020000 at slot=0 function=1 
handle=\_SB_.PCI0.NPES.SPE4.P8PC.LAN1
                         Interrupt request lines:
                             257
                         I/O memory addresses:
                             0xfdfe0000-0xfdffffff
             pcib7 pnpinfo vendor=0x8086 device=0x350c subvendor=0x0000 
subdevice=0x0000 class=0x060400 at slot=0 function=3 handle=\_SB_.PCI0.NPES.BMPX
               pci6
                   I/O memory addresses:
                       0xfdee0000-0xfdeeffff
                 mpt0 pnpinfo vendor=0x1000 device=0x0054 subvendor=0x1043 
subdevice=0x81dd class=0x010000 at slot=3 function=0 
handle=\_SB_.PCI0.NPES.BMPX.SAS3
                     Interrupt request lines:
                         26
                     I/O ports:
                         0xd000-0xd0ff
                     I/O memory addresses:
                         0xfdefc000-0xfdefffff
         unknown pnpinfo vendor=0x8086 device=0x402f subvendor=0x1043 
subdevice=0x82aa class=0x088000 at slot=15 function=0
         hostb1 pnpinfo vendor=0x8086 device=0x4030 subvendor=0x1043 
subdevice=0x82aa class=0x060000 at slot=16 function=0
         hostb2 pnpinfo vendor=0x8086 device=0x4030 subvendor=0x1043 
subdevice=0x82aa class=0x060000 at slot=16 function=1
         hostb3 pnpinfo vendor=0x8086 device=0x4030 subvendor=0x1043 
subdevice=0x82aa class=0x060000 at slot=16 function=2
         hostb4 pnpinfo vendor=0x8086 device=0x4030 subvendor=0x8086 
subdevice=0x8086 class=0x060000 at slot=16 function=3
         hostb5 pnpinfo vendor=0x8086 device=0x4030 subvendor=0x8086 
subdevice=0x8086 class=0x060000 at slot=16 function=4
         hostb6 pnpinfo vendor=0x8086 device=0x4031 subvendor=0x8086 
subdevice=0x8086 class=0x060000 at slot=17 function=0
         hostb7 pnpinfo vendor=0x8086 device=0x4035 subvendor=0x1043 
subdevice=0x82aa class=0x060000 at slot=21 function=0
         hostb8 pnpinfo vendor=0x8086 device=0x4035 subvendor=0x8086 
subdevice=0x8086 class=0x060000 at slot=21 function=1
         hostb9 pnpinfo vendor=0x8086 device=0x4036 subvendor=0x1043 
subdevice=0x82aa class=0x060000 at slot=22 function=0
         hostb10 pnpinfo vendor=0x8086 device=0x4036 subvendor=0x8086 
subdevice=0x8086 class=0x060000 at slot=22 function=1
         pcib8 pnpinfo vendor=0x8086 device=0x2690 subvendor=0x1043 
subdevice=0x81dc class=0x060400 at slot=28 function=0 handle=\_SB_.PCI0.P0P4
           pci4
         pcib9 pnpinfo vendor=0x8086 device=0x2694 subvendor=0x1043 
subdevice=0x81dc class=0x060400 at slot=28 function=2 handle=\_SB_.PCI0.P0P6
           pci3
               I/O ports:
                   0xcc00-0xcc1f
             em2 pnpinfo vendor=0x8086 device=0x109a subvendor=0x1043 
subdevice=0x81c2 class=0x020000 at slot=0 function=0 handle=\_SB_.PCI0.P0P6.LAN2
                 Interrupt request lines:
                     258
                 I/O memory addresses:
                     0xfdae0000-0xfdafffff
         pcib10 pnpinfo vendor=0x8086 device=0x2696 subvendor=0x1043 
subdevice=0x81dc class=0x060400 at slot=28 function=3 handle=\_SB_.PCI0.P0P7
           pci2
               I/O ports:
                   0xbc00-0xbc1f
             em3 pnpinfo vendor=0x8086 device=0x109a subvendor=0x1043 
subdevice=0x81c2 class=0x020000 at slot=0 function=0 handle=\_SB_.PCI0.P0P7.LAN3
                 Interrupt request lines:
                     259
                 I/O memory addresses:
                     0xfd9e0000-0xfd9fffff
         uhci0 pnpinfo vendor=0x8086 device=0x2688 subvendor=0x1043 
subdevice=0x81dc class=0x0c0300 at slot=29 function=0 handle=\_SB_.PCI0.USB0
             Interrupt request lines:
                 23
             I/O ports:
                 0x9880-0x989f
           usb0
             uhub0
         uhci1 pnpinfo vendor=0x8086 device=0x2689 subvendor=0x1043 
subdevice=0x81dc class=0x0c0300 at slot=29 function=1 handle=\_SB_.PCI0.USB1
             Interrupt request lines:
                 19
             I/O ports:
                 0x9c00-0x9c1f
           usb1
             uhub1
         ehci0 pnpinfo vendor=0x8086 device=0x268c subvendor=0x1043 
subdevice=0x81dc class=0x0c0320 at slot=29 function=7 handle=\_SB_.PCI0.EUSB
             Interrupt request lines:
                 23
             I/O memory addresses:
                 0xfd7ffc00-0xfd7fffff
           usb2
             uhub2
         pcib11 pnpinfo vendor=0x8086 device=0x244e subvendor=0x0100 
subdevice=0x81dc class=0x060401 at slot=30 function=0 handle=\_SB_.PCI0.P0P1
           pci1
               I/O ports:
                   0xac00-0xac7f
               I/O memory addresses:
                   0xf8000000-0xfbffffff
                   0xfd8c0000-0xfd8fffff
             vgapci0 pnpinfo vendor=0x18ca device=0x0020 subvendor=0x1043 
subdevice=0x82b4 class=0x030000 at slot=2 function=0
               drm0
         isab0 pnpinfo vendor=0x8086 device=0x2670 subvendor=0x1043 
subdevice=0x81dc class=0x060100 at slot=31 function=0 handle=\_SB_.PCI0.SBRG
           isa0
             fdc0
             ppc0
             sc0
             sio2
             sio3
             vga0
                 I/O ports:
                     0x3c0-0x3df
                 I/O memory addresses:
                     0xa0000-0xbffff
             orm0
                 I/O memory addresses:
                     0xd0000-0xd0fff
                     0xd1000-0xd1fff
                 ACPI I/O memory addresses:
                     0xc0000-0xc7fff
                     0xc8000-0xc8fff
                     0xc9000-0xc9fff
             ipmi0
         ichsmb0 pnpinfo vendor=0x8086 device=0x269b subvendor=0x1043 
subdevice=0x81dc class=0x0c0500 at slot=31 function=3
             Interrupt request lines:
                 19
             I/O ports:
                 0x400-0x41f
           smbus0
             smb0
     acpi_sysresource0 pnpinfo _HID=PNP0C01 _UID=10 at handle=\_SB_.PCI0.MCH_
     unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.NPE1.PCE4
     unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.NPE2
     unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.NPE3
     unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.NPE4
     unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.NPE5.PCE1
     unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.NPE6
     unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.NPE7
     unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.NPE8
     unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.NPES.SPE4.SPE1.PCE3
     unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.NPES.SPE4.SPE2
     unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.NPES.BMPX.PCX5
     unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.NPES.BMPX.PCX6
     unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.P0P1.PCS2
     atpic0 pnpinfo _HID=PNP0000 _UID=0 at handle=\_SB_.PCI0.SBRG.PIC_
     atdma0 pnpinfo _HID=PNP0200 _UID=0 at handle=\_SB_.PCI0.SBRG.DMAD
     attimer0 pnpinfo _HID=PNP0100 _UID=0 at handle=\_SB_.PCI0.SBRG.TMR_
     attimer1 pnpinfo _HID=PNP0B00 _UID=0 at handle=\_SB_.PCI0.SBRG.RTC0
     unknown pnpinfo _HID=PNP0800 _UID=0 at handle=\_SB_.PCI0.SBRG.SPKR
     fpupnp0 pnpinfo _HID=PNP0C04 _UID=0 at handle=\_SB_.PCI0.SBRG.COPR
     unknown pnpinfo _HID=PNP0700 _UID=0 at handle=\_SB_.PCI0.SBRG.FDC_
     atkbdc0 pnpinfo _HID=PNP0303 _UID=0 at handle=\_SB_.PCI0.SBRG.PS2K
         I/O ports:
             0x60
             0x64
       atkbd0
           Interrupt request lines:
               1
       psm0
           Interrupt request lines:
               12
     psmcpnp0 pnpinfo _HID=PNP0F03 _UID=0 at handle=\_SB_.PCI0.SBRG.PS2M
     acpi_sysresource1 pnpinfo _HID=PNP0C02 _UID=46 at handle=\_SB_.PCI0.SBRG.SIOR
     acpi_sysresource2 pnpinfo _HID=PNP0C02 _UID=16 at handle=\_SB_.PCI0.SBRG.RMSC
     unknown pnpinfo _HID=PNP0103 _UID=0 at handle=\_SB_.PCI0.SBRG.HPET
     acpi_sysresource3 pnpinfo _HID=PNP0C02 _UID=0 at handle=\_SB_.PCI0.SBRG.OMSC
     sio0 pnpinfo _HID=PNP0501 _UID=1 at handle=\_SB_.PCI0.SBRG.UAR1
         Interrupt request lines:
             4
         I/O ports:
             0x3f8-0x3ff
     sio1 pnpinfo _HID=PNP0501 _UID=2 at handle=\_SB_.PCI0.SBRG.UAR2
         Interrupt request lines:
             3
         I/O ports:
             0x2f8-0x2ff
     acpi_sysresource4 pnpinfo _HID=PNP0C02 _UID=17 at handle=\_SB_.PCI0.PCIE
     unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.IDE0
     unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.IDE0.CHN0
     unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.IDE0.CHN0.DRV0
     unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.IDE0.CHN0.DRV1
     unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.IDE0.CHN1
     unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.IDE0.CHN1.DRV0
     unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.IDE0.CHN1.DRV1
     unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.IDE1
     unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.IDE1.CHN0
     unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.IDE1.CHN0.DRV0
     unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.IDE1.CHN0.DRV1
     unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.IDE1.CHN1
     unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.IDE1.CHN1.DRV0
     unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.IDE1.CHN1.DRV1
     unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.USB2
     unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.USB3
     unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.P0P5
     acpi_sysresource5 pnpinfo _HID=PNP0C01 _UID=1 at handle=\_SB_.RMEM
     acpi_button0 pnpinfo _HID=PNP0C0C _UID=170 at handle=\_SB_.PWRB
     pci_link0 pnpinfo _HID=PNP0C0F _UID=1 at handle=\_SB_.LNKA
     pci_link1 pnpinfo _HID=PNP0C0F _UID=2 at handle=\_SB_.LNKB
     pci_link2 pnpinfo _HID=PNP0C0F _UID=3 at handle=\_SB_.LNKC
     pci_link3 pnpinfo _HID=PNP0C0F _UID=4 at handle=\_SB_.LNKD
     pci_link4 pnpinfo _HID=PNP0C0F _UID=5 at handle=\_SB_.LNKE
     pci_link5 pnpinfo _HID=PNP0C0F _UID=6 at handle=\_SB_.LNKF
     pci_link6 pnpinfo _HID=PNP0C0F _UID=7 at handle=\_SB_.LNKG
     pci_link7 pnpinfo _HID=PNP0C0F _UID=8 at handle=\_SB_.LNKH
     acpi_hpet0 pnpinfo unknown at unknown
         ACPI I/O memory addresses:
             0xfed00000-0xfed003ff
     acpi_timer0 pnpinfo unknown at unknown
         ACPI I/O ports:
             0x808-0x80b
   apic0
   legacy0
   ram0
       I/O memory addresses:
           0x0-0x9fbff
           0x100000-0xdff9ffff
           0x100000000-0x41fffffff



-------------------------------------------




More information about the freebsd-scsi mailing list