camcontrol rescan all - locks system

[Dan Langille]

On 9/5/2010 9:21 PM, Matthew Jacob wrote:
> On 9/5/2010 5:40 PM, Dan Langille wrote:
>> On 9/5/2010 8:16 PM, Matthew Jacob wrote:
>>> On 9/5/2010 4:17 PM, Dan Langille wrote:
>>>>
>>>> I tried this approach today. I did a 'camcontrol rescan 12' on one ssh
>>>> session. In another, I saw this in /var/log/messages: \
>>>
>>> This looks like an ahc issue, not a cam issue.
>>
>> I think you're saying the ahc is causing the issue. Perhaps I need to
>> choose another SCSI card.
>>
> You might try it if it's an easy thing to do. That would generate a lot
> of information.

At present, I suspect the tape drive in the tape library is jammed, 
based on what I found on its console.  I'll investigate that first, and 
then proceed.

-- 
Dan Langille - http://langille.org/