kern/146287: [ciss] ciss(4) cannot see more than one SmartArray controller

Ulf Zimmermann ulf at Alameda.net
Wed May 5 18:45:16 UTC 2010


On Wed, May 05, 2010 at 10:04:07AM -0600, Scott Long wrote:
> On May 5, 2010, at 9:59 AM, Ulf Zimmermann wrote:
> > On Tue, May 04, 2010 at 10:29:44PM +0200, Per olof Ljungmark wrote:
> >> Scott Long wrote:
> >>> Ah, I see a problem where the ACPI driver is rejecting the bridge
> >>> that the 2 extra controllers are on.  This machine is likely 7-8
> >>> years old, yes?  Disabling ACPI from the freebsd boot menu or from
> >>> the BIOS.  Also check if there are any BIOS/firmware upgrades
> >>> available for the machine.
> >>> 
> >>> Scott
> >> 
> >> A G4 should be around five years I think, the last U320 equipped ProLiant's.
> > 
> > DL380 g4 was retired January 31 2007.
> > 
> >> 
> >> Moving the 6400 card to the slot closest to the MB fixed it. There is a
> >> great deal of confusion in HP's docs on slot numbering and such and
> >> although I did not find such information I suspect the controller should
> >> go inte this slot even if it's pictured in slot two in the manual.
> > 
> > There were 3 different cages for the expanasion cards available. Non-hotswap
> > PCI-X, Hotswap PCI-X and PCI-Express. I don't remember on the G4, but on the G3
> > the cage was bottom slot 133Mhz and not hotswap, while the top two were
> > slower, but hotswap. That could mean different PCI bridge chip.
> > 
> 
> Right, there's a PCIX bridge that is failing to attach, leaving the bus and devices behind it invisible.  I believe that the failure is because the bridge is seen in the PCI register scan, but not in the ACPI AML.  Because it's not in the AML, the acpi_pcib driver vetos the attach.  I believe that if the machine was booted with ACPI disabled, all of the bridges+buses+devices would be seen regardless of what slots they are in.
> 
> Scott

If anyone is interested, I think I can bring up a DL380 g4 so someone can
fix it, if there is interest. Probably got even a SmartArray or other PCI-X
card that can be plugged in.

-- 
Regards, Ulf.

---------------------------------------------------------------------
Ulf Zimmermann, 1525 Pacific Ave., Alameda, CA-94501, #: 510-865-0204
You can find my resume at: http://www.Alameda.net/~ulf/resume.html


More information about the freebsd-scsi mailing list