kern/146287: [ciss] ciss(4) cannot see more than one SmartArray controller

Scott Long scottl at samsco.org
Tue May 4 18:14:07 UTC 2010


If you can install and boot to the first controller, please run "pciconf -lv" and send me the output.  I looks like the linux driver might have a wildcard entry for these controllers, but I want to make sure that I have all of the information before I do something similar for FreeBSD.

Thanks,
Scott

On May 4, 2010, at 12:00 PM, Per olof Ljungmark wrote:

> The following reply was made to PR kern/146287; it has been noted by GNATS.
> 
> From: Per olof Ljungmark <peo at intersonic.se>
> To: bug-followup at FreeBSD.org, peo at intersonic.se
> Cc: seanbru at yahoo-inc.com
> Subject: Re: kern/146287: [ciss] ciss(4) cannot see more than one SmartArray
> controller
> Date: Tue, 04 May 2010 19:56:19 +0200
> 
> Copyright (c) 1992-2009 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>        The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 8.0-RELEASE-p2 #0: Tue May  4 00:23:37 CEST 2010
>    peo at lowell.i.inter-sonic.com:/usr/obj/usr/src/sys/GENERIC
> Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80e1a000.
> Timecounter "i8254" frequency 1193182 Hz quality 0
> Calibrating TSC clock ... TSC clock: 3400136791 Hz
> CPU: Intel(R) Xeon(TM) CPU 3.40GHz (3400.14-MHz K8-class CPU)
>  Origin = "GenuineIntel"  Id = 0xf41  Stepping = 1
> 
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>  Features2=0x649d<SSE3,DTES64,MON,DS_CPL,EST,CNXT-ID,CX16,xTPR>
>  AMD Features=0x20000800<SYSCALL,LM>
>  TSC: P-state invariant
> real memory  = 12884901888 (12288 MB)
> Physical memory chunk(s):
> 0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages)
> 0x0000000000e51000 - 0x00000000dfff2fff, 3743031296 bytes (913826 pages)
> 0x0000000100000000 - 0x00000003049d6fff, 8667361280 bytes (2116055 pages)
> avail memory = 12349284352 (11777 MB)
> ACPI APIC Table: <HP     00000083>
> INTR: Adding local APIC 6 as a target
> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
> FreeBSD/SMP: 2 package(s) x 1 core(s) x 2 HTT threads
> cpu0 (BSP): APIC ID:  0
> cpu1 (AP/HT): APIC ID:  1
> cpu2 (AP): APIC ID:  6
> cpu3 (AP/HT): APIC ID:  7
> APIC: CPU 0 has ACPI ID 0
> APIC: CPU 1 has ACPI ID 1
> APIC: CPU 2 has ACPI ID 6
> APIC: CPU 3 has ACPI ID 7
> ULE: setup cpu 0
> ULE: setup cpu 1
> ULE: setup cpu 2
> ULE: setup cpu 3
> ACPI: RSDP 0xf4f00 00024 (v2 HP    )
> ACPI: XSDT 0xdfff3300 0004C (v1 HP     P51      00000002   �\^D 0000162E)
> ACPI: FACP 0xdfff3380 000F4 (v3 HP     P51      00000002   �\^D 0000162E)
> ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16
> 20090521 tbfadt-707
> ACPI: DSDT 0xdfff3480 02DAB (v1 HP         DSDT 00000001 INTL 20030228)
> ACPI: FACS 0xdfff3100 00040
> ACPI: SPCR 0xdfff3140 00050 (v1 HP     SPCRRBSU 00000001   �\^D 0000162E)
> ACPI: MCFG 0xdfff31c0 0003C (v1 HP     ProLiant 00000001      00000000)
> ACPI: APIC 0xdfff3200 000C2 (v1 HP     00000083 00000002      00000000)
> ACPI: SSDT 0xdfff8000 004C9 (v1 HP        SSDTP 00000001 INTL 20030228)
> MADT: Found IO APIC ID 8, Interrupt 0 at 0xfec00000
> ioapic0: Routing external 8259A's -> intpin 0
> MADT: Found IO APIC ID 9, Interrupt 24 at 0xfec80000
> MADT: Found IO APIC ID 10, Interrupt 48 at 0xfec80400
> MADT: Found IO APIC ID 11, Interrupt 72 at 0xfec84000
> MADT: Found IO APIC ID 12, Interrupt 96 at 0xfec84400
> MADT: Interrupt override: source 0, irq 2
> ioapic0: Routing IRQ 0 -> intpin 2
> MADT: Interrupt override: source 9, irq 9
> ioapic0: intpin 9 trigger: level
> lapic: Routing NMI -> LINT1
> lapic: LINT1 trigger: edge
> lapic: LINT1 polarity: high
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> ioapic1 <Version 2.0> irqs 24-47 on motherboard
> ioapic2 <Version 2.0> irqs 48-71 on motherboard
> ioapic3 <Version 2.0> irqs 72-95 on motherboard
> ioapic4 <Version 2.0> irqs 96-119 on motherboard
> cpu0 BSP:
>     ID: 0x00000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
>  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
>  timer: 0x000100ef therm: 0x00010000 err: 0x000100f0 pcm: 0x00010400
> wlan: <802.11 Link Layer>
> null: <null device, zero device>
> random: <entropy source, Software, Yarrow>
> nfslock: pseudo-device
> kbd: new array size 4
> kbd1 at kbdmux0
> mem: <memory>
> io: <I/O>
> hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
> acpi0: <HP P51> on motherboard
> PCIe: Memory Mapped configuration base @ 0xe0000000
> ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
> acpi0: [MPSAFE]
> acpi0: [ITHREAD]
> acpi0: Power Button (fixed)
> acpi0: wakeup code va 0xffffff8000025000 pa 0x4000
> acpi_bus_number: root bus has no _BBN, assuming 0
> AcpiOsDerivePciId: \\_SB_.PCI0.CFG0.MEM0 -> bus 0 dev 0 func 0
> acpi_bus_number: root bus has no _BBN, assuming 0
> AcpiOsDerivePciId: \\_SB_.PCI0.PTC0.PCXC.SHP0 -> bus 5 dev 0 func 0
> acpi_bus_number: root bus has no _BBN, assuming 0
> AcpiOsDerivePciId: \\_SB_.PCI0.IBRG.ICH5 -> bus 0 dev 31 func 0
> ACPI timer: 0/397 0/5 0/5 0/5 0/6 0/5 0/5 0/6 0/5 0/4 -> 0
> Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0
> pci_link0:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0    5   N     0  5 7 10 11
>  Validation          0    5   N     0  5 7 10 11
>  After Disable       0  255   N     0  5 7 10 11
> pci_link1:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0    7   N     0  5 7 10 11
>  Validation          0    7   N     0  5 7 10 11
>  After Disable       0  255   N     0  5 7 10 11
> pci_link2:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0    7   N     0  5 7 10 11
>  Validation          0    7   N     0  5 7 10 11
>  After Disable       0  255   N     0  5 7 10 11
> pci_link3:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0    5   N     0  5 7 10 11
>  Validation          0    5   N     0  5 7 10 11
>  After Disable       0  255   N     0  5 7 10 11
> pci_link4:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0  255   N     0  5 7 10 11
>  Validation          0  255   N     0  5 7 10 11
>  After Disable       0  255   N     0  5 7 10 11
> pci_link5:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0    5   N     0  5 7 10 11
>  Validation          0    5   N     0  5 7 10 11
>  After Disable       0  255   N     0  5 7 10 11
> pci_link6:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0    5   N     0  5 7 10 11
>  Validation          0    5   N     0  5 7 10 11
>  After Disable       0  255   N     0  5 7 10 11
> pci_link7:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0    5   N     0  5 7 10 11
>  Validation          0    5   N     0  5 7 10 11
>  After Disable       0  255   N     0  5 7 10 11
> pcib0: <ACPI Host-PCI bridge> on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pci0: domain=0, physical bus=0
> found-> vendor=0x8086, dev=0x3590, revid=0x0c
>        domain=0, bus=0, slot=0, func=0
>        class=06-00-00, hdrtype=0x00, mfdev=1
>        cmdreg=0x0146, statreg=0x0090, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x8086, dev=0x3595, revid=0x0c
>        domain=0, bus=0, slot=2, func=0
>        class=06-04-00, hdrtype=0x01, mfdev=0
>        cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
>        intpin=a, irq=255
>        powerspec 2  supports D0 D3  current D0
>        MSI supports 2 messages
> found-> vendor=0x8086, dev=0x3599, revid=0x0c
>        domain=0, bus=0, slot=6, func=0
>        class=06-04-00, hdrtype=0x01, mfdev=0
>        cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
>        intpin=a, irq=255
>        powerspec 2  supports D0 D3  current D0
>        MSI supports 2 messages
> found-> vendor=0x8086, dev=0x24d2, revid=0x02
>        domain=0, bus=0, slot=29, func=0
>        class=0c-03-00, hdrtype=0x00, mfdev=1
>        cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=a, irq=5
>        map[20]: type I/O Port, range 32, base 0x3000, size  5, enabled
> pcib0: matched entry for 0.29.INTA
> pcib0: slot 29 INTA hardwired to IRQ 16
> found-> vendor=0x8086, dev=0x24d4, revid=0x02
>        domain=0, bus=0, slot=29, func=1
>        class=0c-03-00, hdrtype=0x00, mfdev=0
>        cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=b, irq=5
>        map[20]: type I/O Port, range 32, base 0x3020, size  5, enabled
> pcib0: matched entry for 0.29.INTB
> pcib0: slot 29 INTB hardwired to IRQ 19
> found-> vendor=0x8086, dev=0x24d7, revid=0x02
>        domain=0, bus=0, slot=29, func=2
>        class=0c-03-00, hdrtype=0x00, mfdev=0
>        cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=c, irq=7
>        map[20]: type I/O Port, range 32, base 0x3040, size  5, enabled
> pcib0: matched entry for 0.29.INTC
> pcib0: slot 29 INTC hardwired to IRQ 18
> found-> vendor=0x8086, dev=0x24de, revid=0x02
>        domain=0, bus=0, slot=29, func=3
>        class=0c-03-00, hdrtype=0x00, mfdev=0
>        cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=a, irq=5
>        map[20]: type I/O Port, range 32, base 0x3060, size  5, enabled
> pcib0: matched entry for 0.29.INTA
> pcib0: slot 29 INTA hardwired to IRQ 16
> found-> vendor=0x8086, dev=0x24dd, revid=0x02
>        domain=0, bus=0, slot=29, func=7
>        class=0c-03-20, hdrtype=0x00, mfdev=0
>        cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=d, irq=5
>        powerspec 2  supports D0 D3  current D0
>        map[10]: type Memory, range 32, base 0xfbef0000, size 10, enabled
> pcib0: matched entry for 0.29.INTD
> pcib0: slot 29 INTD hardwired to IRQ 23
> found-> vendor=0x8086, dev=0x244e, revid=0xc2
>        domain=0, bus=0, slot=30, func=0
>        class=06-04-00, hdrtype=0x01, mfdev=0
>        cmdreg=0x0147, statreg=0x0080, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x8086, dev=0x24d0, revid=0x02
>        domain=0, bus=0, slot=31, func=0
>        class=06-01-00, hdrtype=0x00, mfdev=1
>        cmdreg=0x014f, statreg=0x0280, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x8086, dev=0x24db, revid=0x02
>        domain=0, bus=0, slot=31, func=1
>        class=01-01-8a, hdrtype=0x00, mfdev=0
>        cmdreg=0x0005, statreg=0x0288, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=a, irq=255
>        map[20]: type I/O Port, range 32, base 0x500, size  4, enabled
>        map[24]: type Memory, range 32, base 0, size 10, memory disabled
> pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
> pcib1:   domain            0
> pcib1:   secondary bus     2
> pcib1:   subordinate bus   4
> pcib1:   I/O decode        0x4000-0x4fff
> pcib1:   memory decode     0xfdd00000-0xfdefffff
> pcib1:   no prefetched decode
> pci2: <ACPI PCI bus> on pcib1
> pci2: domain=0, physical bus=2
> found-> vendor=0x8086, dev=0x0329, revid=0x09
>        domain=0, bus=2, slot=0, func=0
>        class=06-04-00, hdrtype=0x01, mfdev=1
>        cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
>        powerspec 2  supports D0 D3  current D0
>        MSI supports 1 message, 64 bit
> found-> vendor=0x8086, dev=0x032a, revid=0x09
>        domain=0, bus=2, slot=0, func=2
>        class=06-04-00, hdrtype=0x01, mfdev=1
>        cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
>        powerspec 2  supports D0 D3  current D0
>        MSI supports 1 message, 64 bit
> pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci2
> pcib2:   domain            0
> pcib2:   secondary bus     3
> pcib2:   subordinate bus   3
> pcib2:   I/O decode        0xf000-0xfff
> pcib2:   memory decode     0xfdd00000-0xfddfffff
> pcib2:   no prefetched decode
> pci3: <ACPI PCI bus> on pcib2
> pci3: domain=0, physical bus=3
> found-> vendor=0x14e4, dev=0x1648, revid=0x10
>        domain=0, bus=3, slot=1, func=0
>        class=02-00-00, hdrtype=0x00, mfdev=1
>        cmdreg=0x0156, statreg=0x02b0, cachelnsz=16 (dwords)
>        lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
>        intpin=a, irq=7
>        powerspec 2  supports D0 D3  current D0
>        MSI supports 8 messages, 64 bit
>        map[10]: type Memory, range 64, base 0xfddf0000, size 16, enabled
> pcib2: requested memory range 0xfddf0000-0xfddfffff: good
> pcib1: requested memory range 0xfddf0000-0xfddfffff: good
> pcib2: matched entry for 3.1.INTA
> pcib2: slot 1 INTA hardwired to IRQ 25
> found-> vendor=0x14e4, dev=0x1648, revid=0x10
>        domain=0, bus=3, slot=1, func=1
>        class=02-00-00, hdrtype=0x00, mfdev=1
>        cmdreg=0x0156, statreg=0x02b0, cachelnsz=16 (dwords)
>        lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
>        intpin=b, irq=7
>        powerspec 2  supports D0 D3  current D0
>        MSI supports 8 messages, 64 bit
>        map[10]: type Memory, range 64, base 0xfdde0000, size 16, enabled
> pcib2: requested memory range 0xfdde0000-0xfddeffff: good
> pcib1: requested memory range 0xfdde0000-0xfddeffff: good
> pcib2: matched entry for 3.1.INTB
> pcib2: slot 1 INTB hardwired to IRQ 26
> pci0:3:1:0: bad VPD cksum, remain 19
> bge0: <HP NC7782 Gigabit Server Adapter, ASIC rev. 0x2100> mem
> 0xfddf0000-0xfddfffff irq 25 at device 1.0 on pci3
> bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xfddf0000
> bge0: CHIP ID 0x21000000; ASIC REV 0x02; CHIP REV 0x21; PCI-X
> miibus0: <MII bus> on bge0
> brgphy0: <BCM5704 10/100/1000baseTX PHY> PHY 1 on miibus0
> brgphy0: OUI 0x000818, model 0x0019, rev. 0
> brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
> 1000baseT-FDX, auto
> bge0: bpf attached
> bge0: Ethernet address: 00:12:79:d1:2e:2d
> ioapic1: routing intpin 1 (PCI IRQ 25) to lapic 0 vector 49
> bge0: [MPSAFE]
> bge0: [ITHREAD]
> pci0:3:1:1: bad VPD cksum, remain 19
> bge1: <HP NC7782 Gigabit Server Adapter, ASIC rev. 0x2100> mem
> 0xfdde0000-0xfddeffff irq 26 at device 1.1 on pci3
> bge1: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xfdde0000
> bge1: CHIP ID 0x21000000; ASIC REV 0x02; CHIP REV 0x21; PCI-X
> miibus1: <MII bus> on bge1
> brgphy1: <BCM5704 10/100/1000baseTX PHY> PHY 1 on miibus1
> brgphy1: OUI 0x000818, model 0x0019, rev. 0
> brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
> 1000baseT-FDX, auto
> bge1: bpf attached
> bge1: Ethernet address: 00:12:79:d1:2e:2c
> ioapic1: routing intpin 2 (PCI IRQ 26) to lapic 0 vector 50
> bge1: [MPSAFE]
> bge1: [ITHREAD]
> pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci2
> pcib3:   domain            0
> pcib3:   secondary bus     4
> pcib3:   subordinate bus   4
> pcib3:   I/O decode        0x4000-0x4fff
> pcib3:   memory decode     0xfde00000-0xfdefffff
> pcib3:   no prefetched decode
> pci4: <ACPI PCI bus> on pcib3
> pci4: domain=0, physical bus=4
> found-> vendor=0x0e11, dev=0x0046, revid=0x01
>        domain=0, bus=4, slot=3, func=0
>        class=01-04-00, hdrtype=0x00, mfdev=0
>        cmdreg=0x0157, statreg=0x0230, cachelnsz=16 (dwords)
>        lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=a, irq=5
>        powerspec 2  supports D0 D1 D3  current D0
>        map[10]: type Memory, range 64, base 0xfdef0000, size 13, enabled
> pcib3: requested memory range 0xfdef0000-0xfdef1fff: good
> pcib1: requested memory range 0xfdef0000-0xfdef1fff: good
>        map[18]: type I/O Port, range 32, base 0x4000, size  8, enabled
> pcib3: requested I/O range 0x4000-0x40ff: in range
> pcib1: requested I/O range 0x4000-0x40ff: in range
>        map[1c]: type Memory, range 64, base 0xfde80000, size 18, enabled
> pcib3: requested memory range 0xfde80000-0xfdebffff: good
> pcib1: requested memory range 0xfde80000-0xfdebffff: good
> pcib3: matched entry for 4.3.INTA
> pcib3: slot 3 INTA hardwired to IRQ 51
> ciss0: <HP Smart Array 6i> port 0x4000-0x40ff mem
> 0xfdef0000-0xfdef1fff,0xfde80000-0xfdebffff irq 51 at device 3.0 on pci4
> ciss0: Reserved 0x2000 bytes for rid 0x10 type 3 at 0xfdef0000
> ciss0: PERFORMANT Transport
> ciss0: got 0 MSI messages]
> ioapic2: routing intpin 3 (PCI IRQ 51) to lapic 0 vector 51
> ciss0: [MPSAFE]
> ciss0: [ITHREAD]
> ciss0: using 256 of 1024 available commands
> ciss0:   firmware 2.84
> ciss0:   2 SCSI channels
> ciss0:   signature 'CISS'
> ciss0:   valence 1
> ciss0:   supported I/O methods 0x80000006<simple,performant>
> ciss0:   active I/O method 0x5<performant>
> ciss0:   4G page base 0x00000000
> ciss0:   interrupt coalesce delay 0us
> ciss0:   interrupt coalesce count 16
> ciss0:   max outstanding commands 1024
> ciss0:   bus types 0x4
> ciss0:   server name ''
> ciss0:   heartbeat 0x5c
> ciss0: 6 physical devices
> ciss0: 1 logical drive
> ciss0: logical drive (b0t0): RAID 1, 139776MB online
> pcib4: <ACPI PCI-PCI bridge> at device 6.0 on pci0
> pcib4:   domain            0
> pcib4:   secondary bus     5
> pcib4:   subordinate bus   12
> pcib4:   I/O decode        0x5000-0x5fff
> pcib4:   memory decode     0xfdf00000-0xfdffffff
> pcib4:   no prefetched decode
> pci5: <ACPI PCI bus> on pcib4
> pci5: domain=0, physical bus=5
> found-> vendor=0x8086, dev=0x0329, revid=0x09
>        domain=0, bus=5, slot=0, func=0
>        class=06-04-00, hdrtype=0x01, mfdev=1
>        cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
>        powerspec 2  supports D0 D3  current D0
>        MSI supports 1 message, 64 bit
> found-> vendor=0x8086, dev=0x032a, revid=0x09
>        domain=0, bus=5, slot=0, func=2
>        class=06-04-00, hdrtype=0x01, mfdev=1
>        cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
>        powerspec 2  supports D0 D3  current D0
>        MSI supports 1 message, 64 bit
> pcib5: <ACPI PCI-PCI bridge> at device 0.0 on pci5
> pcib5:   domain            0
> pcib5:   secondary bus     6
> pcib5:   subordinate bus   9
> pcib5:   I/O decode        0x5000-0x5fff
> pcib5:   memory decode     0xfdf00000-0xfdffffff
> pcib5:   no prefetched decode
> pci6: <ACPI PCI bus> on pcib5
> pci6: domain=0, physical bus=6
> found-> vendor=0x1014, dev=0x01a7, revid=0x02
>        domain=0, bus=6, slot=2, func=0
>        class=06-04-00, hdrtype=0x01, mfdev=0
>        cmdreg=0x0147, statreg=0x0230, cachelnsz=16 (dwords)
>        lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
>        powerspec 2  supports D0 D3  current D0
> pcib6: <ACPI PCI-PCI bridge> at device 2.0 on pci6
> pcib6:   domain            0
> pcib6:   secondary bus     7
> pcib6:   subordinate bus   7
> pcib6:   I/O decode        0x5000-0x5fff
> pcib6:   memory decode     0xfdf00000-0xfdffffff
> pcib6:   no prefetched decode
> device_attach: pcib6 attach returned 6
> pcib7: <ACPI PCI-PCI bridge> at device 0.2 on pci5
> pcib7:   domain            0
> pcib7:   secondary bus     10
> pcib7:   subordinate bus   12
> pcib7:   I/O decode        0xf000-0xfff
> pcib7:   no prefetched decode
> pci10: <ACPI PCI bus> on pcib7
> pci10: domain=0, physical bus=10
> uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0x3000-0x301f
> irq 16 at device 29.0 on pci0
> uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3000
> ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 52
> uhci0: [MPSAFE]
> uhci0: [ITHREAD]
> uhci0: LegSup = 0x003b
> usbus0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
> uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0x3020-0x303f
> irq 19 at device 29.1 on pci0
> uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3020
> ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 53
> uhci1: [MPSAFE]
> uhci1: [ITHREAD]
> uhci1: LegSup = 0x0010
> usbus1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
> uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0x3040-0x305f
> irq 18 at device 29.2 on pci0
> uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3040
> ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 54
> uhci2: [MPSAFE]
> uhci2: [ITHREAD]
> uhci2: LegSup = 0x0010
> usbus2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
> uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0x3060-0x307f
> irq 16 at device 29.3 on pci0
> uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3060
> uhci3: [MPSAFE]
> uhci3: [ITHREAD]
> uhci3: LegSup = 0x0010
> usbus3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
> ehci0: <Intel 82801EB/R (ICH5) USB 2.0 controller> mem
> 0xfbef0000-0xfbef03ff irq 23 at device 29.7 on pci0
> ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfbef0000
> ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 55
> ehci0: [MPSAFE]
> ehci0: [ITHREAD]
> usbus4: EHCI version 1.0
> usbus4: <Intel 82801EB/R (ICH5) USB 2.0 controller> on ehci0
> pcib8: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pcib8:   domain            0
> pcib8:   secondary bus     1
> pcib8:   subordinate bus   1
> pcib8:   I/O decode        0x1000-0x2fff
> pcib8:   memory decode     0xfbf00000-0xfcffffff
> pcib8:   no prefetched decode
> pcib8:   Subtractively decoded bridge.
> pci1: <ACPI PCI bus> on pcib8
> pci1: domain=0, physical bus=1
> found-> vendor=0x1002, dev=0x4752, revid=0x27
>        domain=0, bus=1, slot=3, func=0
>        class=03-00-00, hdrtype=0x00, mfdev=0
>        cmdreg=0x0087, statreg=0x0290, cachelnsz=16 (dwords)
>        lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
>        powerspec 2  supports D0 D1 D2 D3  current D0
>        map[10]: type Memory, range 32, base 0xfc000000, size 24, enabled
> pcib8: requested memory range 0xfc000000-0xfcffffff: good
>        map[14]: type I/O Port, range 32, base 0x2000, size  8, enabled
> pcib8: requested I/O range 0x2000-0x20ff: in range
>        map[18]: type Memory, range 32, base 0xfbff0000, size 12, enabled
> pcib8: requested memory range 0xfbff0000-0xfbff0fff: good
> found-> vendor=0x0e11, dev=0xb203, revid=0x01
>        domain=0, bus=1, slot=4, func=0
>        class=08-80-00, hdrtype=0x00, mfdev=1
>        cmdreg=0x0103, statreg=0x0290, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=a, irq=5
>        powerspec 2  supports D0 D3  current D0
>        map[10]: type I/O Port, range 32, base 0x1800, size  8, enabled
> pcib8: requested I/O range 0x1800-0x18ff: in range
>        map[14]: type Memory, range 32, base 0xfbfe0000, size  9, enabled
> pcib8: requested memory range 0xfbfe0000-0xfbfe01ff: good
> pcib8: matched entry for 1.4.INTA
> pcib8: slot 4 INTA hardwired to IRQ 21
> found-> vendor=0x0e11, dev=0xb204, revid=0x01
>        domain=0, bus=1, slot=4, func=2
>        class=08-80-00, hdrtype=0x00, mfdev=1
>        cmdreg=0x0197, statreg=0x0290, cachelnsz=16 (dwords)
>        lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=b, irq=5
>        powerspec 2  supports D0 D3  current D0
>        map[10]: type I/O Port, range 32, base 0x2400, size  8, enabled
> pcib8: requested I/O range 0x2400-0x24ff: in range
>        map[14]: type Memory, range 32, base 0xfbfd0000, size 11, enabled
> pcib8: requested memory range 0xfbfd0000-0xfbfd07ff: good
>        map[18]: type Memory, range 32, base 0xfbfc0000, size 13, enabled
> pcib8: requested memory range 0xfbfc0000-0xfbfc1fff: good
>        map[1c]: type Memory, range 32, base 0xfbf00000, size 19, enabled
> pcib8: requested memory range 0xfbf00000-0xfbf7ffff: good
> pcib8: matched entry for 1.4.INTB
> pcib8: slot 4 INTB hardwired to IRQ 22
> vgapci0: <VGA-compatible display> port 0x2000-0x20ff mem
> 0xfc000000-0xfcffffff,0xfbff0000-0xfbff0fff at device 3.0 on pci1
> pci1: <base peripheral> at device 4.0 (no driver attached)
> pci1: <base peripheral> at device 4.2 (no driver attached)
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH5 UDMA100 controller> port
> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x500-0x50f at device 31.1 on pci0
> atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x500
> ata0: <ATA channel 0> on atapci0
> atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
> atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
> ata0: reset tp1 mask=03 ostat0=50 ostat1=00
> ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
> ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
> ata0: reset tp2 stat0=00 stat1=00 devices=0x10000
> ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 56
> ata0: [MPSAFE]
> ata0: [ITHREAD]
> ata1: <ATA channel 1> on atapci0
> atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
> atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
> ata1: reset tp1 mask=03 ostat0=00 ostat1=00
> ata1: stat0=0x01 err=0x01 lsb=0x01 msb=0x01
> ata1: stat1=0x01 err=0x01 lsb=0x01 msb=0x01
> ata1: reset tp2 stat0=01 stat1=01 devices=0x0
> ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 57
> ata1: [MPSAFE]
> ata1: [ITHREAD]
> acpi_tz0: <Thermal Zone> on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> atkbd: the current kbd controller command byte 0065
> atkbd: keyboard ID 0x41ab (2)
> kbd0 at atkbd0
> kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
> ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 58
> atkbd0: [GIANT-LOCKED]
> atkbd0: [ITHREAD]
> psm0: unable to allocate IRQ
> psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
> psm0: current command byte:0065
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 59
> psm0: [GIANT-LOCKED]
> psm0: [ITHREAD]
> psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
> psm0: config:00000000, flags:00000008, packet size:3
> psm0: syncmask:c0, syncbits:00
> uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
> ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 60
> uart0: [FILTER]
> uart0: fast interrupt
> fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f5 irq 6 drq 2 on acpi0
> fdc0: ic_type 90 part_id 73
> ioapic0: routing intpin 6 (ISA IRQ 6) to lapic 0 vector 61
> fdc0: [FILTER]
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> cpu0: <ACPI CPU> on acpi0
> ACPI: SSDT 0xdfff9000 002DA (v1 HP        SSDT0 00000001 INTL 20030228)
> cpu0: switching to generic Cx mode
> acpi_perf0: <ACPI CPU Frequency Control> on cpu0
> p4tcc0: <CPU Frequency Thermal Control> on cpu0
> cpu1: <ACPI CPU> on acpi0
> ACPI: SSDT 0xdfff9300 002DA (v1 HP        SSDT1 00000001 INTL 20030228)
> est1: <Enhanced SpeedStep Frequency Control> on cpu1
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 112d0000112d
> device_attach: est1 attach returned 6
> p4tcc1: <CPU Frequency Thermal Control> on cpu1
> cpu2: <ACPI CPU> on acpi0
> ACPI: SSDT 0xdfff9600 002DA (v1 HP        SSDT2 00000001 INTL 20030228)
> est2: <Enhanced SpeedStep Frequency Control> on cpu2
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 112d0000112d
> device_attach: est2 attach returned 6
> p4tcc2: <CPU Frequency Thermal Control> on cpu2
> cpu3: <ACPI CPU> on acpi0
> ACPI: SSDT 0xdfff9900 002DF (v1 HP        SSDT3 00000001 INTL 20030228)
> est3: <Enhanced SpeedStep Frequency Control> on cpu3
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 112d0000112d
> device_attach: est3 attach returned 6
> p4tcc3: <CPU Frequency Thermal Control> on cpu3
> ahc_isa_probe 0: ioport 0xc00 alloc failed
> ex_isa_identify()
> isa_probe_children: disabling PnP devices
> atkbdc: atkbdc0 already exists; skipping it
> fdc: fdc0 already exists; skipping it
> sc: sc0 already exists; skipping it
> uart: uart0 already exists; skipping it
> isa_probe_children: probing non-PnP devices
> orm0: <ISA Option ROMs> at iomem
> 0xc0000-0xc7fff,0xc8000-0xcbfff,0xee000-0xeffff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> atrtc0: <AT Real Time Clock> at port 0x70 irq 8 on isa0
> atrtc0: registered as a time-of-day clock (resolution 1000000us)
> ppc0: cannot reserve I/O port range
> ppc0: <Parallel port> failed to probe at irq 7 on isa0
> uart1: <Non-standard ns8250 class UART with FIFOs> at port 0x2f8-0x2ff
> irq 3 on isa0
> ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 0 vector 62
> uart1: [FILTER]
> uart1: fast interrupt
> isa_probe_children: probing PnP devices
> Device configuration finished.
> Reducing kern.maxvnodes 763673 -> 100000
> procfs registered
> lapic: Divisor 2, Frequency 100004020 hz
> Timecounter "TSC" frequency 3400136791 Hz quality -100
> Timecounters tick every 1.000 msec
> lo0: bpf attached
> hptrr: no controller detected.
> ata0: Identifying devices: 00010000
> ata0: New devices: 00010000
> fdc0: output ready timeout
> fdc0: output ready timeout
> fdc0: output ready timeout
> fdc0: output ready timeout
> fdc0: output ready timeout
> fdc0: output ready timeout
> fdc0: output ready timeout
> usbus0: 12Mbps Full Speed USB v1.0
> usbus1: 12Mbps Full Speed USB v1.0
> usbus2: 12Mbps Full Speed USB v1.0
> usbus3: 12Mbps Full Speed USB v1.0
> usbus4: 480Mbps High Speed USB v2.0
> ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
> acd0: setting PIO4 on ICH5 chip
> acd0: setting UDMA33 on ICH5 chip
> ugen0.1: <Intel> at usbus0
> uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
> ugen1.1: <Intel> at usbus1
> uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
> ugen2.1: <Intel> at usbus2
> uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
> ugen3.1: <Intel> at usbus3
> uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
> ugen4.1: <Intel> at usbus4
> uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
> acd0: <HL-DT-STCD-RW/DVD DRIVE GCC-C10N/2.00> CDRW drive at ata0 as master
> acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer,
> UDMA33
> acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
> acd0: Writes: CDR, CDRW, test write, burnproof
> acd0: Audio: play, 256 volume levels
> acd0: Mechanism: ejectable tray, unlocked
> acd0: Medium: no/blank disc
> ata1: Identifying devices: 00000000
> ata1: New devices: 00000000
> uhub0: 2 ports with 2 removable, self powered
> uhub1: 2 ports with 2 removable, self powered
> uhub2: 2 ports with 2 removable, self powered
> uhub3: 2 ports with 2 removable, self powered
> fdc0: output ready timeout
> fdc0: input ready timeout
> fdc0: input ready timeout
> fdc0: output ready timeout
> fdc0: input ready timeout
> fdc0: input ready timeout
> fdc0: output ready timeout
> fdc0: input ready timeout
> fdc0: input ready timeout
> fdc0: output ready timeout
> fdc0: input ready timeout
> fdc0: input ready timeout
> da0 at ciss0 bus 0 target 0 lun 0
> da0: <COMPAQ RAID 1  VOLUME OK> Fixed Direct Access SCSI-4 device
> da0: 135.168MB/s transfers
> da0: Command Queueing enabled
> da0: 140002MB (286726080 512 byte sectors: 255H 32S/T 35138C)
> pass0 at ciss0 bus 0 target 0 lun 0
> pass0: <COMPAQ RAID 1  VOLUME OK> Fixed Direct Access SCSI-4 device
> pass0: 135.168MB/s transfers
> pass0: Command Queueing enabled
> pass1 at ciss0 bus 33 target 0 lun 0
> pass1: <SEAGATE ST373207LC 0005> Fixed Uninstalled SCSI-3 device
> pass1: Serial Number 3KT5ABMQ000077052PVP
> pass1: 135.168MB/s transfers
> pass1: Command Queueing enabled
> pass2 at ciss0 bus 33 target 1 lun 0
> pass2: <SEAGATE ST373207LC 0005> Fixed Uninstalled SCSI-3 device
> pass2: Serial Number 3KT65G0300009740UG3C
> pass2: 135.168MB/s transfers
> pass2: Command Queueing enabled
> pass3 at ciss0 bus 33 target 2 lun 0
> pass3: <SEAGATE ST373207LC 0005> Fixed Uninstalled SCSI-3 device
> pass3: Serial Number 3KT65G7800009740W27L
> pass3: 135.168MB/s transfers
> pass3: Command Queueing enabled
> pass4 at ciss0 bus 33 target 3 lun 0
> pass4: <SEAGATE ST373207LC 0003> Fixed Uninstalled SCSI-3 device
> pass4: Serial Number 3KT2W9ZB00007616NLEN
> pass4: 135.168MB/s transfers
> pass4: Command Queueing enabled
> pass5 at ciss0 bus 33 target 4 lun 0
> pass5: <SEAGATE ST373207LC 0003> Fixed Uninstalled SCSI-3 device
> pass5: Serial Number 3KT18LBP0000754281N7
> pass5: 135.168MB/s transfers
> pass5: Command Queueing enabled
> pass6 at ciss0 bus 33 target 7 lun 0
> pass6: <COMPAQ PROLIANT 6L6I 0.10> Fixed Processor SCSI-2 device
> pass6: 135.168MB/s transfers
> ATA PseudoRAID loaded
> SMP: AP CPU #1 Launched!
> cpu1 AP:
>     ID: 0x01000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
>  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
>  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
> SMP: AP CPU #2 Launched!
> cpu2 AP:
>     ID: 0x06000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
>  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
>  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
> SMP: AP CPU #3 Launched!
> cpu3 AP:
>     ID: 0x07000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
>  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
>  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
> ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 6 vector 48
> ioapic0: routing intpin 6 (ISA IRQ 6) to lapic 6 vector 49
> ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 6 vector 50
> ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 6 vector 51
> ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 6 vector 52
> ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 6 vector 53
> ioapic1: routing intpin 2 (PCI IRQ 26) to lapic 6 vector 54
> uhub4: 8 ports with 8 removable, self powered
> ugen2.2: <vendor 0x04d9> at usbus2
> ukbd0: <vendor 0x04d9 product 0x1400, class 0/0, rev 1.10/1.43, addr 2>
> on usbus2
> kbd2 at ukbd0
> kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
> ums0: <vendor 0x04d9 product 0x1400, class 0/0, rev 1.10/1.43, addr 2>
> on usbus2
> ums0: 5 buttons and [XYZ] coordinates ID=1
> GEOM: new disk da0
> Trying to mount root from ufs:/dev/da0s1a
> ct_to_ts([2010-05-04 17:49:30]) = 1272995370.000000000
> start_init: trying /sbin/init
> bge0:
> bge0: link state changed to UP
> link UP
> 
> _______________________________________________
> freebsd-scsi at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-scsi
> To unsubscribe, send any mail to "freebsd-scsi-unsubscribe at freebsd.org"



More information about the freebsd-scsi mailing list