juke box problem - "chio: /dev/ch0: CHIOMOVE: Device not configured"

[Paul Chvostek]

Hi Sean,

On Sat, Oct 10, 2009 at 02:49:19PM -0700, Sean Bruno wrote:
> 
> On Sat, 2009-10-10 at 17:14 -0400, Paul Chvostek wrote:
> > 000031L4
> 
> Huh ... have you tried moving the tape by "voltag" ??
> 
> e.g.
> 
> move voltag 000020L4 drive 0

I have now, but with the same result:

  # chio status -v | grep drive
  drive 0: <ACCESS,FULL> voltag: <000039L4:0>
  drive 1: <ACCESS,FULL> voltag: <000030L4:0>
  #
  # chio move voltag 000030L4 slot 44
  chio: /dev/ch0: CHIOMOVE: Device not configured
  #
  # tail -6 /var/log/messages
  Oct 14 02:48:16 nas kernel: (ch0:isp0:0:0:1): MOVE MEDIUM. CDB: a5 0 0 0 0 2 4 15 0 0 0 0 
  Oct 14 02:48:16 nas kernel: (ch0:isp0:0:0:1): CAM Status: SCSI Status Error
  Oct 14 02:48:16 nas kernel: (ch0:isp0:0:0:1): SCSI Status: Check Condition
  Oct 14 02:48:16 nas kernel: (ch0:isp0:0:0:1): ILLEGAL REQUEST asc:25,0
  Oct 14 02:48:16 nas kernel: (ch0:isp0:0:0:1): Logical unit not supported
  Oct 14 02:48:16 nas kernel: (ch0:isp0:0:0:1): Unretryable error


Is there a way to determine whether this problem is with the device or
with FreeBSD?  Note that I *can* move the tapes around using the juke
box's web gui, so it's not a physical problem.

For reference:

  # grep 'at isp0' /var/run/dmesg.boot 
  sa0 at isp0 bus 0 target 0 lun 0
  ch0 at isp0 bus 0 target 0 lun 1

Thanks muchly.


-- 
  Paul Chvostek                                             <paul at it.ca>
  Operations / Abuse / Whatever
  it.canada, hosting and development                   http://www.it.ca/