FreeBSD 5.4-i386, isp(4) and an EVA3000

Rainer Duffner rainer at ultra-secure.de
Thu Jul 14 10:48:18 GMT 2005


Scott Long wrote:

> Rainer Duffner wrote:
>
>> Hi,
>>
>> I've just installed FreeBSD 5.4 on a HP blade, connected to our EVA 
>> 3000 SAN.
>>
>> The sysinstall-kernel doesn't have the ispfw-module and it didn't 
>> recognize the LUNs - is there a way to load that module from the 
>> original install-medium or do I have to bake my own?
>> OK, so this is the test-blade that has a hard-disk inside and I 
>> installed on that, built my own kernel that had ispfw(4), booted and 
>> ... couldn't get to FreeBSD, because it had now found the SAN and 
>> moved the "old" da0 to da8 or so...
>>
>> Didum...Re-install, this time I see a lot of LUNs from the SAN, and 
>> install on da0, all went well, I can boot that - beautiful, compared 
>> to the likes of RHEL...
>
>
>
> Read the section in /sys/conf/NOTES that talks about wiring down
> SCSI IDs and LUNs to particular device numbers.
>
> Scott



OK, I knew that (sort of).
But I'm still curious why I am seeing so many ghost-LUNS.

Another thing: when I tried to enlarge such a VDISK, it didn't work 
quite the way I originally thought (which you can blame on my thinking) 
- it created a 2nd partition on the same LUN with the rest of the space.
So I should rather create a new LUN and use vinum to concatenate them 
together, right?
Does that work "online"?
But what was more annoying was the fact that when I ran camcontrol 
rescan, the whole machine just froze.
(I had unmounted the slice, AFAICR)

Is this normal?



cheers,
Rainer


More information about the freebsd-scsi mailing list