Adaptec asr0 / ahc0 doesnt work on 5.3-BETA2 while 4.10-RELEASE
can use it
scottl at samsco.org
Wed Sep 1 02:25:56 PDT 2004
Leroy van Logchem wrote:
> Dear FreeBSD-scsi people,
> Short desc.:
> FreeBSD 5.3-BETA2 can't use Adaptec 7902 while FreeBSD 4.10-RELEASE can.
The Adaptec 7902 is a SCSI chip. If you are referring to the 2015S RAID
card, then please refer to that. The 7902 works fine.
> Hardware being used is a Supermicro 6013P8 with a onboard Adaptec
> AIC-7902 with an Adaptec 2015S raid module. The system has two internal
> disks being mirrored raid1. An external raid cabinet, a Infortrend
> Eonstor A08, is attached as two scsi-3 disk devices. The Adaptec bios
> does show the devices everytime we reboot. Both 4.10 and 5.3-BETA2 do
> show the bios exported devices A: till D:
What exactly is the problem? I see no details about 5.3 here.
More information about the freebsd-scsi