SCSI error using gnome-cd

[Peter Schultz]

This is an actual SCSI drive so there's no ATAng or atapicam issue here. 
  Here's the output I see from gnome-cd:

** (gnome-cd:822): WARNING **: Error getting leadout

** (gnome-cd:822): WARNING **: Error getting leadout

(gnome-cd:822): CDDBSlave2-CRITICAL **: file cddb-slave-client.c: line 
197 (cddb_slave_client_query): assertion `nsecs > 0' failed

slave-mike wrote:
> if you can, add -force or equivilent to the command line.
> there seem to be problems with ATAng and atapicam. :(
> 
> Peter Schultz wrote:
> 
>>I have set the permissions to properly read the CD, and I can play audio 
>>CDs using xmms, but when I try using gnome-cd I get the following:
>>
>>(cd0:ahc0:0:4:0): READ TOC/PMA/ATIP {MMC Proposed}. CDB: 43 2 0 0 0 0 c 
>>0 c 0
>>(cd0:ahc0:0:4:0): CAM Status: SCSI Status Error
>>(cd0:ahc0:0:4:0): SCSI Status: Check Condition
>>(cd0:ahc0:0:4:0): ILLEGAL REQUEST asc:24,0
>>(cd0:ahc0:0:4:0): Invalid field in CDB
>>(cd0:ahc0:0:4:0): Unretryable error
>>(cd0:ahc0:0:4:0): READ SUB-CHANNEL. CDB: 42 2 40 1 0 0 1c 0 18 0
>>(cd0:ahc0:0:4:0): CAM Status: SCSI Status Error
>>(cd0:ahc0:0:4:0): SCSI Status: Check Condition
>>(cd0:ahc0:0:4:0): ILLEGAL REQUEST asc:24,0
>>(cd0:ahc0:0:4:0): Invalid field in CDB
>>(cd0:ahc0:0:4:0): Unretryable error
>>(cd0:ahc0:0:4:0): READ SUB-CHANNEL. CDB: 42 2 40 1 0 0 1b 0 18 0
>>(cd0:ahc0:0:4:0): CAM Status: SCSI Status Error
>>(cd0:ahc0:0:4:0): SCSI Status: Check Condition
>>(cd0:ahc0:0:4:0): ILLEGAL REQUEST asc:24,0
>>(cd0:ahc0:0:4:0): Invalid field in CDB
>>(cd0:ahc0:0:4:0): Unretryable error
>>(cd0:ahc0:0:4:0): READ TOC/PMA/ATIP {MMC Proposed}. CDB: 43 2 0 0 0 0 c 
>>0 c 0
>>(cd0:ahc0:0:4:0): CAM Status: SCSI Status Error
>>(cd0:ahc0:0:4:0): SCSI Status: Check Condition
>>(cd0:ahc0:0:4:0): ILLEGAL REQUEST asc:24,0
>>(cd0:ahc0:0:4:0): Invalid field in CDB
>>(cd0:ahc0:0:4:0): Unretryable error
>>(cd0:ahc0:0:4:0): READ SUB-CHANNEL. CDB: 42 2 40 1 0 0 1c 0 18 0
>>(cd0:ahc0:0:4:0): CAM Status: SCSI Status Error
>>(cd0:ahc0:0:4:0): SCSI Status: Check Condition
>>(cd0:ahc0:0:4:0): ILLEGAL REQUEST asc:24,0
>>(cd0:ahc0:0:4:0): Invalid field in CDB
>>(cd0:ahc0:0:4:0): Unretryable error
>>
>>Here's some info about my device:
>>
>>GEOM: create disk cd0 dp=0xc36a0e00
>>cd0 at ahc0 bus 0 target 4 lun 0
>>cd0: <PLEXTOR CD-R   PX-W4220T 1.04> Removable CD-ROM SCSI-2 device
>>cd0: 10.000MB/s transfers (10.000MHz, offset 8)
>>
>>Pete...
>>
>>_______________________________________________
>>freebsd-scsi at freebsd.org mailing list
>>http://lists.freebsd.org/mailman/listinfo/freebsd-scsi
>>To unsubscribe, send any mail to "freebsd-scsi-unsubscribe at freebsd.org"
> 
> 
>