SCSI tape problem

Denis Prezhevalsky cypher at netvision.net.il
Wed Dec 31 05:58:32 PST 2003


Hello,
I hope this is the right list for my problem.
I recently installed FreeBSD 5.1-RELEASE on HP DL380 G3.
The problem is that that FreeBSD not probing/recognizing my external Compaq AIT 35 SCSI tape
connected to the SCSI port located on the back of the server (built-in SCSI LVD). 
When the computer starting up, I can see the BIOS message that the tape is recognized,
but when FreeBSD started - nothing. Running camcontrol :

mail# camcontrol devlist -v
scbus0 on ciss0 bus 0:
<COMPAQ RAID 1  VOLUME OK>         at scbus0 target 0 lun 0 (pass0,da0)
<COMPAQ RAID 5  VOLUME OK>         at scbus0 target 1 lun 0 (pass1,da1)
scbus-1 on xpt0 bus 0:
<  >                               at scbus-1 target -1 lun -1 (xpt0)

The same results even after running camcontrol rescan all.
Changing SCSI id doesn't help. The tape is fine - running on another machine without any problem.
Any help?
I'm attaching dmesg and kernel conf.

Dec 31 14:57:56 mail kernel: Copyright (c) 1992-2003 The FreeBSD Project.
Dec 31 14:57:56 mail kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
Dec 31 14:57:56 mail kernel: The Regents of the University of California. All rights reserved.
Dec 31 14:57:57 mail kernel: FreeBSD 5.1-RELEASE #0: Wed Dec 31 12:37:06 IST 2003
Dec 31 14:57:57 mail kernel: admin at mail.ort.org.il:/usr/src/sys/i386/compile/SMP31Dec2003
Dec 31 14:57:57 mail kernel: Preloaded elf kernel "/boot/kernel/kernel" at 0xc0434000.
Dec 31 14:57:57 mail kernel: Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0434244.
Dec 31 14:57:57 mail kernel: Timecounter "i8254"  frequency 1193182 Hz
Dec 31 14:57:57 mail kernel: Timecounter "TSC"  frequency 2784983072 Hz
Dec 31 14:57:57 mail kernel: CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2784.98-MHz 686-class CPU)
Dec 31 14:57:57 mail kernel: Origin = "GenuineIntel"  Id = 0xf29  Stepping = 9
Dec 31 14:57:57 mail kernel: Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,P
AT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Dec 31 14:57:57 mail kernel: Hyperthreading: 2 logical CPUs
Dec 31 14:57:57 mail kernel: real memory  = 2147459072 (2047 MB)
Dec 31 14:57:57 mail kernel: avail memory = 2085732352 (1989 MB)
Dec 31 14:57:57 mail kernel: Programming 16 pins in IOAPIC #0
Dec 31 14:57:57 mail kernel: IOAPIC #0 intpin 2 -> irq 0
Dec 31 14:57:57 mail kernel: Programming 16 pins in IOAPIC #1
Dec 31 14:57:57 mail kernel: Programming 16 pins in IOAPIC #2
Dec 31 14:57:57 mail kernel: Programming 16 pins in IOAPIC #3
Dec 31 14:57:57 mail kernel: FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
Dec 31 14:57:57 mail kernel: cpu0 (BSP): apic id:  0, version: 0x00050014, at 0xfee00000
Dec 31 14:57:57 mail kernel: cpu1 (AP):  apic id:  1, version: 0x00050014, at 0xfee00000
Dec 31 14:57:57 mail kernel: cpu2 (AP):  apic id:  6, version: 0x00050014, at 0xfee00000
Dec 31 14:57:57 mail kernel: cpu3 (AP):  apic id:  7, version: 0x00050014, at 0xfee00000
Dec 31 14:57:57 mail kernel: io0 (APIC): apic id:  2, version: 0x000f0011, at 0xfec00000
Dec 31 14:57:57 mail kernel: io1 (APIC): apic id:  3, version: 0x000f0011, at 0xfec01000
Dec 31 14:57:57 mail kernel: io2 (APIC): apic id:  4, version: 0x000f0011, at 0xfec02000
Dec 31 14:57:57 mail kernel: io3 (APIC): apic id:  5, version: 0x000f0011, at 0xfec03000
Dec 31 14:57:57 mail kernel: Pentium Pro MTRR support enabled
Dec 31 14:57:57 mail kernel: npx0: <math processor> on motherboard
Dec 31 14:57:57 mail kernel: npx0: INT 16 interface
Dec 31 14:57:57 mail kernel: acpi0: <COMPAQ P29     > on motherboard
Dec 31 14:57:57 mail kernel: ACPI-0629: *** Info: There are no GPE blocks defined in the FADT
Dec 31 14:57:57 mail kernel: acpi0: power button is handled as a fixed feature programming model.
Dec 31 14:57:57 mail kernel: Timecounter "ACPI-safe"  frequency 3579545 Hz
Dec 31 14:57:57 mail kernel: pcibios: BIOS version 2.10
Dec 31 14:57:57 mail kernel: acpi_timer0: <32-bit timer at 3.579545MHz> port 0x920-0x923 on acpi0
Dec 31 14:57:57 mail kernel: acpi_cpu0: <CPU> on acpi0
Dec 31 14:57:57 mail kernel: acpi_cpu1: <CPU> on acpi0
Dec 31 14:57:57 mail kernel: acpi_cpu2: <CPU> on acpi0
Dec 31 14:57:57 mail kernel: acpi_cpu3: <CPU> on acpi0
Dec 31 14:57:57 mail kernel: acpi_cpu4: <CPU> on acpi0
Dec 31 14:57:57 mail kernel: acpi_cpu5: <CPU> on acpi0
Dec 31 14:57:57 mail kernel: acpi_cpu6: <CPU> on acpi0
Dec 31 14:57:57 mail kernel: acpi_cpu7: <CPU> on acpi0
Dec 31 14:57:57 mail kernel: acpi_tz0: <thermal zone> on acpi0
Dec 31 14:57:57 mail kernel: pcib0: <ACPI Host-PCI bridge> on acpi0
Dec 31 14:57:57 mail kernel: pci0: <ACPI PCI bus> on pcib0
Dec 31 14:57:57 mail kernel: IOAPIC #1 intpin 0 -> irq 2
Dec 31 14:57:57 mail kernel: IOAPIC #1 intpin 1 -> irq 3
Dec 31 14:57:57 mail kernel: pci0: <display, VGA> at device 3.0 (no driver attached)
Dec 31 14:57:57 mail kernel: pci0: <base peripheral> at device 4.0 (no driver attached)
Dec 31 14:57:57 mail kernel: pci0: <base peripheral> at device 4.2 (no driver attached)
Dec 31 14:57:57 mail kernel: isab0: <PCI-ISA bridge> at device 15.0 on pci0
Dec 31 14:57:57 mail kernel: isa0: <ISA bus> on isab0
Dec 31 14:57:57 mail kernel: atapci0: <ServerWorks CSB5 UDMA100 controller> port 0x2000-0x200f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 15.1 on  pci0
Dec 31 14:57:57 mail kernel: ata0: at 0x1f0 irq 14 on atapci0
Dec 31 14:57:57 mail kernel: ata1: simplex device, DMA on primary only
Dec 31 14:57:57 mail kernel: ata1: at 0x170 irq 15 on atapci0
Dec 31 14:57:57 mail kernel: pcib1: <ACPI Host-PCI bridge> on acpi0
Dec 31 14:57:57 mail kernel: pci1: <ACPI PCI bus> on pcib1
Dec 31 14:57:57 mail kernel: IOAPIC #1 intpin 14 -> irq 5
Dec 31 14:57:57 mail kernel: ciss0: <Compaq Smart Array 5i> port 0x3000-0x30ff mem 0xf7cf0000-0xf7cf3fff,0xf7dc0000-0xf7dfffff irq 5 at device 3.0 on pci1
Dec 31 14:57:57 mail kernel: ciss0: using 256 of 1024 available commands
Dec 31 14:57:57 mail kernel: ciss0:   2 logical drives configured
Dec 31 14:57:57 mail kernel: ciss0:   firmware 2.36
Dec 31 14:57:57 mail kernel: ciss0:   2 SCSI channels
Dec 31 14:57:57 mail kernel: ciss0:   signature 'CISS'
Dec 31 14:57:57 mail kernel: ciss0:   valence 1
Dec 31 14:57:57 mail kernel: ciss0:   supported I/O methods 0xe<simple,performant,MEMQ>
Dec 31 14:57:57 mail kernel: ciss0:   active I/O method 0x3<simple>
Dec 31 14:57:57 mail kernel: ciss0:   4G page base 0x00000000
Dec 31 14:57:57 mail kernel: ciss0:   interrupt coalesce delay 1000us
Dec 31 14:57:57 mail kernel: ciss0:   interrupt coalesce count 16
Dec 31 14:57:57 mail kernel: ciss0:   max outstanding commands 1024
Dec 31 14:57:57 mail kernel: ciss0:   bus types 0x2<ultra3>
Dec 31 14:57:57 mail kernel: ciss0:   server name ''
Dec 31 14:57:57 mail kernel: ciss0:   heartbeat 0x1000003a
Dec 31 14:57:57 mail kernel: ciss0: 2 logical drives
Dec 31 14:57:57 mail kernel: ciss0: logical drive 1: RAID 1, 34304MB online
Dec 31 14:57:57 mail kernel: ciss0: logical drive 1: RAID 5, 419840MB online
Dec 31 14:57:57 mail kernel: pcib2: <ACPI Host-PCI bridge> on acpi0
Dec 31 14:57:57 mail kernel: pci2: <ACPI PCI bus> on pcib2
Dec 31 14:57:57 mail kernel: IOAPIC #1 intpin 13 -> irq 7
Dec 31 14:57:58 mail kernel: IOAPIC #1 intpin 15 -> irq 10
Dec 31 14:57:58 mail kernel: bge0: <Broadcom BCM5703X Gigabit Ethernet, ASIC rev. 0x1002> mem 0xf7ef0000-0xf7efffff irq 7 at device 1.0 on pci2
Dec 31 14:57:58 mail kernel: bge0: Ethernet address: 00:0b:cd:dc:3a:53
Dec 31 14:57:58 mail kernel: miibus0: <MII bus> on bge0
Dec 31 14:57:58 mail kernel: brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0
Dec 31 14:57:58 mail kernel: brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
Dec 31 14:57:58 mail kernel: bge1: <Broadcom BCM5703X Gigabit Ethernet, ASIC rev. 0x1002> mem 0xf7ee0000-0xf7eeffff irq 10 at device 2.0 on pci2
Dec 31 14:57:58 mail kernel: bge1: Ethernet address: 00:0b:cd:dc:3a:52
Dec 31 14:57:58 mail kernel: miibus1: <MII bus> on bge1
Dec 31 14:57:58 mail kernel: brgphy1: <BCM5703 10/100/1000baseTX PHY> on miibus1
Dec 31 14:57:58 mail kernel: brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
Dec 31 14:57:58 mail kernel: pcib3: <ACPI Host-PCI bridge> on acpi0
Dec 31 14:57:58 mail kernel: pci3: <ACPI PCI bus> on pcib3
Dec 31 14:57:58 mail kernel: pcib4: <ACPI Host-PCI bridge> on acpi0
Dec 31 14:57:58 mail kernel: pci6: <ACPI PCI bus> on pcib4
Dec 31 14:57:58 mail kernel: IOAPIC #1 intpin 2 -> irq 11
Dec 31 14:57:58 mail kernel: pci6: <base peripheral> at device 30.0 (no driver attached)
Dec 31 14:57:58 mail kernel: atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
Dec 31 14:57:58 mail kernel: atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
Dec 31 14:57:58 mail kernel: kbd0 at atkbd0
Dec 31 14:57:58 mail kernel: sio0 port 0x3f8-0x3ff irq 4 on acpi0
Dec 31 14:57:58 mail kernel: sio0: type 16550A
Dec 31 14:57:58 mail kernel: fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
Dec 31 14:57:58 mail kernel: fdc0: FIFO enabled, 8 bytes threshold
Dec 31 14:57:58 mail kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0
Dec 31 14:57:58 mail kernel: orm0: <Option ROMs> at iomem 0xee000-0xeffff,0xcc000-0xcd7ff,0xc8000-0xcbfff,0xc0000-0xc7fff on isa0
Dec 31 14:57:58 mail kernel: pmtimer0 on isa0
Dec 31 14:57:58 mail kernel: sc0: <System console> at flags 0x100 on isa0
Dec 31 14:57:58 mail kernel: sc0: VGA <16 virtual consoles, flags=0x300>
Dec 31 14:57:58 mail kernel: sio1: configured irq 3 not in bitmap of probed irqs 0
Dec 31 14:57:58 mail kernel: sio1: port may not be enabled
Dec 31 14:57:58 mail kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Dec 31 14:57:58 mail kernel: APIC_IO: Testing 8254 interrupt delivery
Dec 31 14:57:58 mail kernel: APIC_IO: routing 8254 via IOAPIC #0 intpin 2
Dec 31 14:57:58 mail kernel: Timecounters tick every 10.000 msec
Dec 31 14:57:58 mail kernel: ciss0: *** Cache enabled
Dec 31 14:57:58 mail kernel: acd0: CDROM <CD-224E> at ata0-master PIO4
Dec 31 14:57:58 mail kernel: da0 at ciss0 bus 0 target 0 lun 0
Dec 31 14:57:58 mail kernel: da0: <COMPAQ RAID 1  VOLUME OK> Fixed Direct Access SCSI-0 device
Dec 31 14:57:58 mail kernel: da0: 135.168MB/s transfers
Dec 31 14:57:58 mail kernel: da0: 34727MB (71122560 512 byte sectors: 255H 32S/T 8716C)
Dec 31 14:57:58 mail kernel: da1 at ciss0 bus 0 target 1 lun 0
Dec 31 14:57:58 mail kernel: da1: <COMPAQ RAID 5  VOLUME OK> Fixed Direct Access SCSI-0 device
Dec 31 14:57:58 mail kernel: da1: 135.168MB/s transfers
Dec 31 14:57:58 mail kernel: da1: 420027MB (860216490 512 byte sectors: 255H 63S/T 53546C)
Dec 31 14:57:58 mail kernel: SMP: AP CPU #1 Launched!
Dec 31 14:57:58 mail kernel: SMP: AP CPU #2 Launched!
Dec 31 14:57:58 mail kernel: SMP: AP CPU #3 Launched!
Dec 31 14:57:58 mail kernel: Mounting root from ufs:/dev/da0s1a


Kernel conf file:

machine         i386
cpu             I686_CPU
ident           SMP17Nov2003

options         SCHED_4BSD              
options         INET                    
options         FFS                     
options         SOFTUPDATES             
options         UFS_ACL                 
options         UFS_DIRHASH             
options         MD_ROOT                 
options         CD9660                  
options         PROCFS                  
options         PSEUDOFS                
options         COMPAT_43               
options         COMPAT_FREEBSD4         
options         SCSI_DELAY=15000        
options         KTRACE                  
options         SYSVSHM                 
options         SYSVMSG                 
options         SYSVSEM                 
options         _KPOSIX_PRIORITY_SCHEDULING 
options         KBD_INSTALL_CDEV        

# SMP
options         SMP                    
options         APIC_IO                 

device          isa
device          pci
device          fdc

# ATA and ATAPI devices
device          ata
device          atadisk                 
device          atapicd                 
options         ATA_STATIC_ID     
      
# RAID & SCSI
device          ciss            
device          scbus           
device          ch              
device          da              
device          pass           
device          ses             
device          sa              

# atkbdc0 controls both the keyboard and the PS/2 mouse
device          atkbdc          
device          atkbd           
device          vga             
device          sc
device          agp             
device          npx
device          pmtimer
device          sio


# PCI Ethernet NICs that use the common MII bus controller code.
device          miibus          
device          bge             

# Pseudo devices - the number indicates how many units to allocate.
device          random          
device          loop            
device          ether          
device          pty             

# The `bpf' device enables the Berkeley Packet Filter.
device          bpf             

# OPTIONAL
options         QUOTA           
options         COMPAT_LINUX   

Thanks in Advance!

Denis P.





More information about the freebsd-scsi mailing list