Wiring down SCSI devices in STABLE

[Steve Grandi]

Is it possible to "wire down" SCSI device names in STABLE?  The procedure
given in LINT doesn't work...

An excerpt from a config file for a machine called archive:
--------------------------------------------------------------------------
# SCSI Controllers
#device         ahb             # EISA AHA1742 family
device          ahc             # AHA2940 and onboard AIC7xxx devices
device          ahd             # AHA39320/29320 and onboard AIC79xx
devices
#device         amd             # AMD 53C974 (Tekram DC-390(T))
#device         isp             # Qlogic family
#device         mpt             # LSI-Logic MPT/Fusion
device          ncr             # NCR/Symbios Logic
device          sym             # NCR/Symbios Logic (newer chipsets)
options         SYM_SETUP_LP_PROBE_MAP=0x40
                                # Allow ncr to attach legacy NCR devices
when
                                # both sym and ncr are configured

#device         adv0    at isa?
#device         adw
#device         bt0     at isa?
#device         aha0    at isa?
#device         aic0    at isa?

#device         ncv             # NCR 53C500
#device         nsp             # Workbit Ninja SCSI-3
#device         stg             # TMC 18C30/18C50

# SCSI peripherals
device          scbus           # SCSI bus (required)
device          da              # Direct Access (disks)
device          sa              # Sequential Access (tape etc)
device          cd              # CD
device          pass            # Passthrough device (direct SCSI access)
device          scbus0 at ahc0
device          scbus1 at ahd0
device          scbus2 at ahd
device          da0 at scbus1 target 0
device          da1 at scbus1 target 1
device          da2 at scbus1 target 2
device          da3 at scbus0 target 2
---------------------------------------------------------------------------
And the result when I try to make a kernel:

archive# cd /usr/src
archive# make buildkernel

--------------------------------------------------------------
>>> Kernel build for ARCHIVE started on Tue Apr  8 18:57:03 MST 2003
--------------------------------------------------------------
===> ARCHIVE
mkdir -p /usr/obj/usr/src/sys
cd /usr/src/sys/i386/conf;
PATH=/usr/obj/usr/src/i386/usr/sbin:/usr/obj/usr/src/i386/usr/bin:/usr/obj/usr/src/i386/usr/games:/sbin:/bin:/usr/sbin:/usr/bin
config  -d /usr/obj/usr/src/sys/ARCHIVE  /usr/src/sys/i386/conf/ARCHIVE
config: line 120: ahc 0 not defined
*** Error code 1

Stop in /usr/src.
*** Error code 1

Stop in /usr/src.

-- 
Steve Grandi
National Optical Astronomy Observatory/AURA Inc., Tucson AZ USA
Internet: grandi at noao.edu  Voice: +1 520 318-8228  FAX: +1 520 318-8360