Access my digital camera via USB

[Nikolaj Thygesen]

I had a similar problem with my Lumix, and the reason was FAT32 (I think 
- it's been a while) on the flash card. Do you know for sure which fs is 
used?

     N :o)

On 04/14/2015 22:39, William A. Mahaffey III wrote:
> On 04/14/15 15:27, Chris Hill wrote:
>> On Tue, 14 Apr 2015, William A. Mahaffey III wrote:
>>
>>> I am trying to get some photos off of my digital camera via USB 
>>> cable. WHen I plug it in, I get the following in my messages file:
>>>
>>>
>>> Apr 14 14:44:44 kabini1 kernel: ugen3.2: <SAMSUNG> at usbus3
>>> Apr 14 14:44:44 kabini1 kernel: umass0: <SAMSUNG Samsung Digital 
>>> Camera, class 0/0, rev 2.00/0.00, addr 2> on usbus3
>>> Apr 14 14:44:44 kabini1 kernel: umass0:  8070i (ATAPI) over 
>>> Bulk-Only; quirks = 0x4100
>>> Apr 14 14:44:44 kabini1 kernel: umass0:4:0:-1: Attached to scbus4
>>> Apr 14 14:44:44 kabini1 kernel: da0 at umass-sim0 bus 0 scbus4 
>>> target 0 lun 0
>>> Apr 14 14:44:44 kabini1 kernel: da0: <Samsung Digital Camera > 
>>> Removable Direct Access SCSI-0 device
>>> Apr 14 14:44:44 kabini1 kernel: da0: Serial Number E00000000002
>>> Apr 14 14:44:44 kabini1 kernel: da0: 40.000MB/s transfers
>>> Apr 14 14:44:44 kabini1 kernel: da0: 2909MB (5959296 512 byte 
>>> sectors: 255H 63S/T 370C)
>>> Apr 14 14:44:44 kabini1 kernel: da0: quirks=0x2<NO_6_BYTE>
>>> Apr 14 14:44:44 kabini1 kernel: GEOM_PART: integrity check failed 
>>> (da0, MBR)
>>>
>>>
>>> How do I mount this to access the data, there are (apparently) no 
>>> mountable partitions .... TIA.
>>