Using a USB modem.

[Mike Tancsa]

On 9/10/2014 10:18 AM, atar wrote:
> Here's the output of usbconfig -d 4.4 dump_device_desc:
>
>> ugen4.4: <ZTE WCDMA Technologies MSM ZTE,Incorporated> at usbus4, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA)
>>
>> bLength = 0x0012
>> bDescriptorType = 0x0001
>> bcdUSB = 0x0200
>> bDeviceClass = 0x0000
>> bDeviceSubClass = 0x0000
>> bDeviceProtocol = 0x0000
>> bMaxPacketSize0 = 0x0040
>> idVendor = 0x19d2
>> idProduct = 0x0154
>> bcdDevice = 0x0000
>> iManufacturer = 0x0003  <ZTE,Incorporated>
>> iProduct = 0x0002  <ZTE WCDMA Technologies MSM>
>> iSerialNumber = 0x0004  <MF1900PLED010000>
>> bNumConfigurations = 0x0001
>
> Lastly, you've written:
>
>> Then provide the output of
>>
>> # sysctl -a dev.u3g
>
> The output is as the following:


The modem is not attaching to the driver. What version of FreeBSD are 
you using ?  What does
uname -a
show ?

	---Mike


-- 
-------------------
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, mike at sentex.net
Providing Internet services since 1994 www.sentex.net
Cambridge, Ontario Canada   http://www.tancsa.com/