Failure to build FreeBSD 9.2
Juris Kaminskis
juris.kaminskis at gmail.com
Fri Oct 4 21:46:11 UTC 2013
Hello,
I am desperate trying to build FreeBSD 9.2. The same happens with
FreeBSD-Current. When I build 9.1 kernel without building world everything
is ok.
My svn info
Path: .
Working Copy Root Path: /usr/src
URL: http://svn0.eu.freebsd.org/base/release/9.2.0
Repository Root: http://svn0.eu.freebsd.org/base
Repository UUID: ccf9f872-aa2e-dd11-9fc8-001c23d0bc1f
Revision: 255954
Node Kind: directory
Schedule: normal
Last Changed Author: gjb
Last Changed Rev: 255898
Last Changed Date: 2013-09-26 21:28:11 +0300 (Thu, 26 Sep 2013)
When I do standard process:
make buildworld
make buildkernel
make installkernel
reboot
my kernel hangs up and does not respond. I have tried a lot of things but
nothing works.
my new kernel hangs right after:
pci1: <ACPI PCI bus> on pcib1
my uname -a
FreeBSD station 9.1-RELEASE FreeBSD 9.1-RELEASE #0 r243825: Tue Dec 4
09:23:10 UTC 2012
root at farrell.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64
and my dmesg output:
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.1-RELEASE #0 r243825: Tue Dec 4 09:23:10 UTC 2012
root at farrell.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ (2211.11-MHz K8-class
CPU)
Origin = "AuthenticAMD" Id = 0x40fb2 Family = f Model = 4b Stepping = 2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x2001<SSE3,CX16>
AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8>
real memory = 2147483648 (2048 MB)
avail memory = 2045505536 (1950 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <A M I OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <A M I OEMRSDT> on motherboard
acpi0: Power Button (fixed)
unknown: memory range not supported
unknown: memory range not supported
unknown: memory range not supported
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7ff00000 (3) failed
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pcib1: failed to allocate initial memory window: 0xffb00000-0xffbfffff
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x9800-0x98ff mem
0xc0000000-0xcfffffff irq 19 at device 0.0 on pci1
hdac0: <ATI RV630 HDA Controller> irq 16 at device 0.1 on pci1
pcib2: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port
0xa800-0xa8ff mem 0xffcff000-0xffcfffff irq 18 at device 0.0 on pci2
re0: Using 1 MSI message
re0: Chip rev. 0x38000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX,
100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master,
1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow,
1000baseT-FDX-flow-master, auto, auto-flow
re0: Ethernet address: 00:19:db:f6:72:d0
ahci0: <ATI IXP600 AHCI SATA controller> port
0xe800-0xe807,0xe400-0xe403,0xe000-0xe007,0xdc00-0xdc03,0xd800-0xd80f mem
0xffeffc00-0xffefffff irq 22 at device 18.0 on pci0
ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ohci0: <OHCI (generic) USB controller> mem 0xffefe000-0xffefefff irq 16 at
device 19.0 on pci0
usbus0 on ohci0
ohci1: <OHCI (generic) USB controller> mem 0xffefd000-0xffefdfff irq 17 at
device 19.1 on pci0
usbus1 on ohci1
ohci2: <OHCI (generic) USB controller> mem 0xffefc000-0xffefcfff irq 18 at
device 19.2 on pci0
usbus2 on ohci2
ohci3: <OHCI (generic) USB controller> mem 0xffefb000-0xffefbfff irq 17 at
device 19.3 on pci0
usbus3 on ohci3
ohci4: <OHCI (generic) USB controller> mem 0xffefa000-0xffefafff irq 18 at
device 19.4 on pci0
usbus4 on ohci4
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xffeff800-0xffeff8ff irq 19
at device 19.5 on pci0
ehci0: AMD SB600/700 quirk applied
usbus5: EHCI version 1.0
usbus5 on ehci0
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci0: <ATI IXP600 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
hdac1: <ATI SB600 HDA Controller> mem 0xffef4000-0xffef7fff irq 16 at
device 20.2 on pci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci3: <ACPI PCI bus> on pcib3
fwohci0: <VIA Fire II (VT6306)> port 0xbc00-0xbc7f mem
0xffdff800-0xffdfffff irq 20 at device 2.0 on pci3
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:dc:10:00:01:2d:cc:8b
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:dc:10:2d:cc:8b
fwe0: Ethernet address: 02:dc:10:2d:cc:8b
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:dc:10:00:01:2d:cc:8b @ 0xfffe00000000, S400,
maxrec 2048
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x7c344000
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER
mode
re1: <RealTek 8169SC/8110SC Single-chip Gigabit Ethernet> port
0xb800-0xb8ff mem 0xffdff400-0xffdff4ff irq 21 at device 3.0 on pci3
re1: Chip rev. 0x18000000
re1: MAC rev. 0x00000000
miibus1: <MII bus> on re1
rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1
rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX,
100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master,
1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow,
1000baseT-FDX-flow-master, auto, auto-flow
re1: Ethernet address: 00:19:db:f6:04:43
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
acpi0
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ctl: CAM Target Layer loaded
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: CLK_VAL field overlaps THT_EN bit
device_attach: acpi_throttle0 attach returned 6
powernow0: <PowerNow! K8> on cpu0
device_attach: powernow0 attach returned 6
powernow1: <PowerNow! K8> on cpu1
device_attach: powernow1 attach returned 6
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
firewire0: bus manager 0
Timecounters tick every 1.000 msec
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
hdacc1: <Realtek ALC883 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC883 Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek ALC883 (Analog 5.1/2.0)> at nid 20,22,21 and 25 on hdaa1
pcm2: <Realtek ALC883 (Front Analog Headphones)> at nid 27 on hdaa1
pcm3: <Realtek ALC883 (Rear Digital)> at nid 30 on hdaa1
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 480Mbps High Speed USB v2.0
ugen0.1: <ATI> at usbus0
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <ATI> at usbus1
uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <ATI> at usbus2
uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <ATI> at usbus3
uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <ATI> at usbus4
uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <ATI> at usbus5
uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
(aprobe0:ahcich0:0:15:0): NOP. ACB: 00 00 00 00 00 00 00 00 00 00 00 00
(aprobe0:ahcich0:0:15:0): CAM status: Command timeout
(aprobe0:ahcich0:0:15:0): Error 5, Retries exhausted
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 10 ports with 10 removable, self powered
ugen0.2: <Logitech> at usbus0
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 2> on usbus0
kbd2 at ukbd0
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 2> on usbus0
ums0: 16 buttons and [XYZT] coordinates ID=2
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 2> on usbus0
ugen5.2: <Hewlett-Packard> at usbus5
ulpt0: <HP Print> on usbus5
ulpt0: using bi-directional mode
ahcich0: Timeout on slot 0 port 0
ahcich0: is 00000002 cs 00000000 ss 00000000 rs 00000001 tfd 50 serr
00000000 cmd 00042017
(aprobe0:ahcich0:0:0:0): ATA_IDENTIFY. ACB: ec 00 00 00 00 40 00 00 00 00
00 00
(aprobe0:ahcich0:0:0:0): CAM status: Command timeout
(aprobe0:ahcich0:0:0:0): Error 5, Retry was blocked
run_interrupt_driven_hooks: still waiting after 60 seconds for xpt_config
ahcich0: Timeout on slot 0 port 0
ahcich0: is 00000002 cs 00000000 ss 00000000 rs 00000001 tfd 50 serr
00000000 cmd 00042017
(aprobe0:ahcich0:0:0:0): ATA_IDENTIFY. ACB: ec 00 00 00 00 40 00 00 00 00
00 00
(aprobe0:ahcich0:0:0:0): CAM status: Command timeout
(aprobe0:ahcich0:0:0:0): Error 5, Retry was blocked
ada0 at ata0 bus 0 scbus4 target 1 lun 0
ada0: <WDC WD800JB-00CRA1 17.07W17> ATA-5 device
ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
ada0: 76319MB (156301488 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad1
SMP: AP CPU #1 Launched!
cd0 at ata0 bus 0 scbus4 target 0 lun 0
cd0: <ASUS DRW-1608P3S 1.06> Removable CD-ROM SCSI-0 device
cd0: 66.700MB/s transfers (UDMA4, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
thanks
Juris
More information about the freebsd-questions
mailing list