Upgrading from 8.3 to 9.1 zfs pool can't attach
Leslie Jensen
leslie at eskk.nu
Wed May 22 12:55:31 UTC 2013
I've upgraded a machine with freebsd-update from 8.3 to 9.1.
After the first restart I edited /etc/fstab in single user mode because
the names on the disks had changed. But the zpool I have seem to have a
problem and I'm not sure on how to recover it.
May 22 12:00:39 kernel: ZFS WARNING: Unable to attach to ada0.
May 22 12:00:39 kernel: ZFS WARNING: Unable to attach to ada1.
May 22 12:00:39 kernel: ZFS WARNING: Unable to attach to ada4.
May 22 12:00:40 kernel: ZFS WARNING: Unable to attach to ada5.
camcontrol devlist
<ST3320620AS 3.AAE> at scbus0 target 0 lun 0 (ada0,pass0)
<ST3320620AS 3.AAE> at scbus1 target 0 lun 0 (ada1,pass1)
<WDC WD360GD-00FNA0 35.06K35> at scbus2 target 0 lun 0 (ada2,pass2)
<WDC WD360GD-00FNA0 35.06K35> at scbus2 target 1 lun 0 (ada3,pass3)
<ST3320620AS 3.AAE> at scbus3 target 0 lun 0 (ada4,pass4)
<ST3320620AS 3.AAE> at scbus3 target 1 lun 0 (ada5,pass5)
ada2 and ada3 are configured as raid/r0 holding the system.
ada0, ada1, ada4 and ada5 should be a zpool with /storage
cat /etc/fstab
# Device Mountpoint FStype Options Dump Pass#
/dev/raid/r0s1b none swap sw 0 0
/dev/raid/r0s1a / ufs rw 1 1
/dev/raid/r0s1e /tmp ufs rw 2 2
/dev/raid/r0s1f /usr ufs rw 2 2
/dev/raid/r0s1d /var ufs rw 2 2
Can I recover it?
Thanks
/Leslie
More information about the freebsd-questions
mailing list