do I need agp(4) on my amd64 laptop
illoai at gmail.com
illoai at gmail.com
Sat Nov 24 15:30:45 UTC 2012
On 24 November 2012 10:14, illoai at gmail.com <illoai at gmail.com> wrote:
> On 22 November 2012 06:19, Anton Shterenlikht <mexas at bristol.ac.uk> wrote:
>> It is not clear for me from the agp(4) man page,
>> whether I need this device in the kernel or not.
>> The pciconf -lv output is below. Or do I need to
>> show dmesg?
>>
>> Please advise
>>
>> Thanks
>> Anton
>>
>>
>> hostb0 at pci0:0:0:0: class=0x060000 card=0x30c2103c chip=0x79101002 rev=0x00 hdr=0x00
>> vendor = 'Advanced Micro Devices [AMD] nee ATI'
>> device = 'RS690 Host Bridge'
>> class = bridge
>> subclass = HOST-PCI
>> pcib1 at pci0:0:1:0: class=0x060400 card=0x30c2103c chip=0x79121002 rev=0x00 hdr=0x01
>> vendor = 'Advanced Micro Devices [AMD] nee ATI'
>> device = 'RS690 PCI to PCI Bridge (Internal gfx)'
>> class = bridge
>> subclass = PCI-PCI
>> pcib2 at pci0:0:4:0: class=0x060400 card=0x30c2103c chip=0x79141002 rev=0x00 hdr=0x01
>> vendor = 'Advanced Micro Devices [AMD] nee ATI'
>> class = bridge
>> subclass = PCI-PCI
>> pcib3 at pci0:0:5:0: class=0x060400 card=0x30c2103c chip=0x79151002 rev=0x00 hdr=0x01
>> vendor = 'Advanced Micro Devices [AMD] nee ATI'
>> device = 'RS690 PCI to PCI Bridge (PCI Express Port 1)'
>> class = bridge
>> subclass = PCI-PCI
>> pcib4 at pci0:0:6:0: class=0x060400 card=0x30c2103c chip=0x79161002 rev=0x00 hdr=0x01
>> vendor = 'Advanced Micro Devices [AMD] nee ATI'
>> device = 'RS690 PCI to PCI Bridge (PCI Express Port 2)'
>> class = bridge
>> subclass = PCI-PCI
>> ahci0 at pci0:0:18:0: class=0x01018f card=0x43801002 chip=0x43801002 rev=0x00 hdr=0x00
>> vendor = 'Advanced Micro Devices [AMD] nee ATI'
>> device = 'SB600 Non-Raid-5 SATA'
>> class = mass storage
>> subclass = ATA
>> ohci0 at pci0:0:19:0: class=0x0c0310 card=0x30c2103c chip=0x43871002 rev=0x00 hdr=0x00
>> vendor = 'Advanced Micro Devices [AMD] nee ATI'
>> device = 'SB600 USB (OHCI0)'
>> class = serial bus
>> subclass = USB
>> ohci1 at pci0:0:19:1: class=0x0c0310 card=0x30c2103c chip=0x43881002 rev=0x00 hdr=0x00
>> vendor = 'Advanced Micro Devices [AMD] nee ATI'
>> device = 'SB600 USB (OHCI1)'
>> class = serial bus
>> subclass = USB
>> ohci2 at pci0:0:19:2: class=0x0c0310 card=0x30c2103c chip=0x43891002 rev=0x00 hdr=0x00
>> vendor = 'Advanced Micro Devices [AMD] nee ATI'
>> device = 'SB600 USB (OHCI2)'
>> class = serial bus
>> subclass = USB
>> ohci3 at pci0:0:19:3: class=0x0c0310 card=0x30c2103c chip=0x438a1002 rev=0x00 hdr=0x00
>> vendor = 'Advanced Micro Devices [AMD] nee ATI'
>> device = 'SB600 USB (OHCI3)'
>> class = serial bus
>> subclass = USB
>> ohci4 at pci0:0:19:4: class=0x0c0310 card=0x30c2103c chip=0x438b1002 rev=0x00 hdr=0x00
>> vendor = 'Advanced Micro Devices [AMD] nee ATI'
>> device = 'SB600 USB (OHCI4)'
>> class = serial bus
>> subclass = USB
>> ehci0 at pci0:0:19:5: class=0x0c0320 card=0x30c2103c chip=0x43861002 rev=0x00 hdr=0x00
>> vendor = 'Advanced Micro Devices [AMD] nee ATI'
>> device = 'SB600 USB Controller (EHCI)'
>> class = serial bus
>> subclass = USB
>> none0 at pci0:0:20:0: class=0x0c0500 card=0x30c2103c chip=0x43851002 rev=0x14 hdr=0x00
>> vendor = 'Advanced Micro Devices [AMD] nee ATI'
>> device = 'SBx00 SMBus Controller'
>> class = serial bus
>> subclass = SMBus
>> atapci0 at pci0:0:20:1: class=0x010182 card=0x30c2103c chip=0x438c1002 rev=0x00 hdr=0x00
>> vendor = 'Advanced Micro Devices [AMD] nee ATI'
>> device = 'SB600 IDE'
>> class = mass storage
>> subclass = ATA
>> hdac0 at pci0:0:20:2: class=0x040300 card=0x30c2103c chip=0x43831002 rev=0x00 hdr=0x00
>> vendor = 'Advanced Micro Devices [AMD] nee ATI'
>> device = 'SBx00 Azalia (Intel HDA)'
>> class = multimedia
>> subclass = HDA
>> isab0 at pci0:0:20:3: class=0x060100 card=0x30c2103c chip=0x438d1002 rev=0x00 hdr=0x00
>> vendor = 'Advanced Micro Devices [AMD] nee ATI'
>> device = 'SB600 PCI to LPC Bridge'
>> class = bridge
>> subclass = PCI-ISA
>> pcib5 at pci0:0:20:4: class=0x060401 card=0x00000000 chip=0x43841002 rev=0x00 hdr=0x01
>> vendor = 'Advanced Micro Devices [AMD] nee ATI'
>> device = 'SBx00 PCI to PCI Bridge'
>> class = bridge
>> subclass = PCI-PCI
>> hostb1 at pci0:0:24:0: class=0x060000 card=0x00000000 chip=0x11001022 rev=0x00 hdr=0x00
>> vendor = 'Advanced Micro Devices [AMD]'
>> device = 'K8 [Athlon64/Opteron] HyperTransport Technology Configuration'
>> class = bridge
>> subclass = HOST-PCI
>> hostb2 at pci0:0:24:1: class=0x060000 card=0x00000000 chip=0x11011022 rev=0x00 hdr=0x00
>> vendor = 'Advanced Micro Devices [AMD]'
>> device = 'K8 [Athlon64/Opteron] Address Map'
>> class = bridge
>> subclass = HOST-PCI
>> hostb3 at pci0:0:24:2: class=0x060000 card=0x00000000 chip=0x11021022 rev=0x00 hdr=0x00
>> vendor = 'Advanced Micro Devices [AMD]'
>> device = 'K8 [Athlon64/Opteron] DRAM Controller'
>> class = bridge
>> subclass = HOST-PCI
>> hostb4 at pci0:0:24:3: class=0x060000 card=0x00000000 chip=0x11031022 rev=0x00 hdr=0x00
>> vendor = 'Advanced Micro Devices [AMD]'
>> device = 'K8 [Athlon64/Opteron] Miscellaneous Control'
>> class = bridge
>> subclass = HOST-PCI
>> vgapci0 at pci0:1:5:0: class=0x030000 card=0x30c2103c chip=0x791f1002 rev=0x00 hdr=0x00
>> vendor = 'Advanced Micro Devices [AMD] nee ATI'
>> device = 'RS690M [Radeon X1200 Series]'
>> class = display
>> subclass = VGA
>> bge0 at pci0:16:0:0: class=0x020000 card=0x30c2103c chip=0x171314e4 rev=0x02 hdr=0x00
>> vendor = 'Broadcom Corporation'
>> device = 'NetLink BCM5906M Fast Ethernet PCI Express'
>> class = network
>> subclass = ethernet
>> siba_bwn0 at pci0:48:0:0: class=0x028000 card=0x1371103c chip=0x431214e4 rev=0x02 hdr=0x00
>> vendor = 'Broadcom Corporation'
>> device = 'BCM4311 802.11a/b/g'
>> class = network
>> cbb0 at pci0:2:4:0: class=0x060700 card=0x30c2103c chip=0x04761180 rev=0xb6 hdr=0x02
>> vendor = 'Ricoh Co Ltd'
>> device = 'RL5c476 II'
>> class = bridge
>> subclass = PCI-CardBus
>
> You bring up a good point. Your laptop is almost the same as mine,
> & the graphics chip is connected via PCI Express.
> I should see if it builds & runs without agp.
>
Looks like drm requires agp for the kernel to link correctly.
Oh well.
...
drm_agpsupport.o: In function `drm_agp_free_memory':
/home/svn/9.1/src/sys/dev/drm/drm_agpsupport.c:(.text+0xcba):
undefined reference to `agp_fi
nd_device'
/home/svn/9.1/src/sys/dev/drm/drm_agpsupport.c:(.text+0xcd4):
undefined reference to `agp_fr
ee_memory'
drm_agpsupport.o: In function `drm_agp_init':
/home/svn/9.1/src/sys/dev/drm/drm_agpsupport.c:(.text+0xdb8):
undefined reference to `agp_fi
nd_device'
/home/svn/9.1/src/sys/dev/drm/drm_agpsupport.c:(.text+0xe2f):
undefined reference to `agp_ge
t_info'
*** [kernel] Error code 1
...
--
--
More information about the freebsd-questions
mailing list