what software can support that UPS ?

[Wojciech Puchar]

> /usr/ports/sysutils/apcupsd ?

? - so what to give as device? /dev/ugen1.3?
set

UPSCABLE usb
UPSTYPE usb
not set DEVICE as specified in comments for USB devices.

can't find UPS. tried setting DEVICE to /dev/ugen1.3 - no avail.



tried /usr/ports/sysutils/nut

selected "EVER" driver, and set up /dev/ugen1.3 as port - driver fails.


from what i found in linux groups it should work as USB HID device. but 
uhid doesn't attach.


>
> On 05/14/2012 14:06, Wojciech Puchar wrote:
>> seems like it is very badly made USB interface, all class data is empty,
>> 
>> 
>> 
>> ugen1.3: <ECO Pro Series UPS EVER> at usbus1, cfg=0 md=HOST spd=FULL 
>> (12Mbps) pwr=ON
>>
>>   bLength = 0x0012
>>   bDescriptorType = 0x0001
>>   bcdUSB = 0x0101
>>   bDeviceClass = 0x0000
>>   bDeviceSubClass = 0x0000
>>   bDeviceProtocol = 0x0000
>>   bMaxPacketSize0 = 0x0008
>>   idVendor = 0x0403
>>   idProduct = 0xe520
>>   bcdDevice = 0x0400
>>   iManufacturer = 0x0001 <EVER>
>>   iProduct = 0x0002 <ECO Pro Series UPS>
>>   iSerialNumber = 0x0003 <ECOPRO00>
>>   bNumConfigurations = 0x0001
>> 
>> 
>> FreeBSD gives only ugen interface.
>> 
>> 
>> what (if any) software support that?
>> _______________________________________________
>> freebsd-questions at freebsd.org mailing list
>> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
>> To unsubscribe, send any mail to 
>> "freebsd-questions-unsubscribe at freebsd.org"
>
>
> -- 
> No trees were killed in the creation of this message.
> However, many electrons were terribly inconvenienced.
>
>